SAFETY GUIDELINES ENGLISH This monitor is designed to be safe to use. However, due to high voltage of about 400 V, fire or serious injury may occur unless you use this monitor in correct way. You are strongly suggested to follow the instruction shown below in order to avoid such injury.
SAFETY GUIDELINES(continued) Warning Fire or electric shock may cause death or serious injury unless you follow the instruction below. ENGLISH If something smells strange or smoke comes from the monitor: Turn off the monitor and disconnect the power plug from the power point immediately. Contact service center after confirming that the smoking has stopped. If you continue to operate the monitor with such abnormal condition, it may cause fire or you may receive an electric shock.
Fire or electric shock may cause death or serious injury unless you follow the instruction. ENGLISH Warning The enclosed power cord must be used! Failure to do so may cause electric shock hazard or fire hazard. In USA/Canada, use a UL LISTED/CSA LABELLED or CERTIFIED power cord set meeting the following specifications : Rating: min. 125V, 10A , Length: max. 3.
SAFETY GUIDELINES(continued) FOR THE CUSTOMERS IN THE U.K. ENGLISH THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K. PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.
Electric shock or other accidents may cause serious injury or damage to your property. ENGLISH Caution You must to check the user manual of the computer when you connect to the monitor. The weight of the monitor or obstructing the ventilation hole of the computer equipment may cause distortion or damage of the computer equipment. Disconnect the power plug from the power point when you carry the monitor.
SAFETY GUIDELINES(continued) Caution You may have serious injury or your property may be damaged unless you follow the instruction below. ENGLISH Do not bundle the power cord. It will be heated up or it may cause a fire. Caution for 200 - 240V operation only This equipment relies on the protective devices in the building installation for short circuit and over - current protection.
Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. Hot places such as near heater, place exposed to the direct rays of the sun. A place where the temperature is widely changing. Places with soot, dust or high humidity. Poor air ventilation place. Place near fire. A wet place such as bathroom, or shower room.
SAFETY GUIDELINES(continued) ENGLISH Precautions for the monitor - Use the attached signal-cable when you connect the monitor with PC equipment. Do not use other signal-cables. - Confirm the connector is fixed tightly when the signal cable is connected. Also confirm the screws on the connector are tightened. - Plug the power cord of the monitor into a different socket from that for other equipment, such as TV, Radio etc.. - Use a plug with ground terminal and make sure that it connects to the ground.
CONTENTS 1 1 2 3 Standard accessories Installation Anti-tumble measures Component Names Installation and Cabling Handling the Remote Controller 3 3 3 4 6 8 OPERATING INSTRUCTIONS 9 Turning Power On and Off Input Selection Volume Adjustment Contrast Adjustment Sound Mute Input Signal Status Display On-Screen Display System, EasyMenu Displays According to Selected DISPLAY AREA (RGB Input) OTHER FEATURES Automatic Store Reset (Settings Initialization) Signal Check Displays by Selecting the DISPLAY SIZES
FEATURES The following features are provided by the color Plasma Display Monitor. ENGLISH Large-screen, high-definition plasma display panel The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024(V) pixels, creates a high-definition, large-screen (aspect ratio : 16:9) and low-profile flat display.
INSTALLATION INSTRUCTIONS Standard accessories ENGLISH This product is complete with the display monitor, plus the accessories shown below. If any of these accessories is missing, please contact your dealer. Color Plasma Display Monitor CMP402HDU USER'S MANUAL MANUEL UTILISATEUR with EasyMenu! EasyMenu is HITACHI's On Screen Display function for easy operation. READ THE INSTR UCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
INSTALLATION INSTRUCTIONS (continued) Component Names ENGLISH Front Panel Remote-control sensor Cabinet (front frame) 8 Stand Control panel The Adjustment button is located on the bottom.
ENGLISH Rear External device connection terminals AUDIO IN SPEAKER TERMINAL (8Ω8W) AUDIO IN R Nearer Terminal RGB1 COMPOSITE IN COMPONENT IN D-SUB IN RGB2 L/MONO Further Terminal R PR/CR R VIDEO1 VIDEO2 L/MONO PB/CB Y VIDEO S V H B G Nearer Terminal Further Terminal R RS232C IN L External speaker terminals Video input terminal RGB input terminals 7 6 Remote controller POWER button 9 POWER RECALL RECALL button 11 MUTE button 11 10 RGB/VIDEO button 10 VOLUME button
INSTALLATION INSTRUCTIONS (continued) Installation and Cabling ENGLISH Connecting to the PC Read Usage Notes ( to ) carefully to ensure maximum safety before proceeding to these steps: 1) Make sure that the display signals produced by your PC meet the specifications of this product. For the specifications of this product, see Product Specifications ( 25 to 26 ). 2) Choose an appropriate site and install the product on a level table where the stand is secure.
ENGLISH Connecting to Video Equipment (such as a video disc player, a DVD player, or a video camera) Read Usage Notes ( to ) carefully to ensure maximum safety before proceeding to these steps: 1) Choose an appropriate site and install the product on a level table where the stand is secure. Install the monitor to have ready access to a power socket available. 2) Make sure that the monitor’s power switch is off. The monitor is shipped with the power switch off.
INSTALLATION INSTRUCTIONS (continued) Handling the Remote Controller ENGLISH Loading Batteries 1) Open the battery cover. Slide the battery cover towards the arrow mark while pressing it. 2) Load batteries. Load two Size AA batteries included observing the correct polarities. 3) Close the battery cover. Slide back the battery cover towards the arrow mark.
OPERATING INSTRUCTIONS Turning Power On and Off ENGLISH To turn on the set power supply, set the MAIN POWER switch ( ) of the main unit to ON and then press the SUB POWER button or the POWER button of the remote control. To turn off the set power supply, press the SUB POWER button of the main unit or the POWER button of the remote control, then set the MAIN POWER switch ( ) to OFF.
OPERATING INSTRUCTIONS (continued) Input Selection ENGLISH Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the sequence of RGB1 -> RGB2 -> VIDEO1 -> VIDEO2 -> RGB1. When the same signal is input to RGB1 and RGB2, the phase may in some cases shift slightly but this is not a malfunction. In such case, readjust the PHASE of the one being used.
While the on-screen display system, EasyMenu 12 , is not on display, press the remote controller SELECT button or to adjust the contrast. When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical (V) frequencies of the input signal will be displayed in a guidance image. While the guidance is on display, press the key to narrow the difference between darkness and brightness.
OPERATING INSTRUCTIONS (continued) On-Screen Display System, EasyMenu ENGLISH Press the MENU button to open an adjustment menu allowing you to complete various adjustments and settings using the SELECT buttons (The , , , and keys of the remote control or the SELECT or VOLUME button of the main unit.). Pink Press the SELECT button of the main unit ( or key of the remote control) to select an item by moving the pink text.
Selected characters Menu item PICTURE if RGB is selected CONTRAST Contrast BRIGHTNESS Brightness COLOR SELECT OPTIONS M PICTURE if VIDEO is selected ( ) Adjustment item GAMMA Color temperature Gamma correction VIDEO LEVEL Input signal level CONTRAST Contrast BRIGHTNESS Brightness COLOR Color (color density) TINT Tint SHARPNESS Sharpness COLOR SELECT Color temperature A I N OPTIONS GAMMA VIDEO LEVEL SOUND Gamma correction Input signal level Setup hint Narrows the gap be
OPERATING INSTRUCTIONS (continued) Adjustment Item List (continued) Menu item ENGLISH Selected characters Adjustment item VGA APPLE 13-inch DISPLAY AREA Display area SVGA XGA SXGA(60) APPLE 16-inch 19-inch Setup hint NORMAL FULL FULL UP/LF UP/LF Set to FULL to display images across the screen UP/RI UP/RI for gaining an overview of the overall images. DW/LF DW/LF DW/RI DW/RI CENTER CENTER Horizontal position V.
Menu item Selected characters LANGUAGE Adjustment item Setup hint ENG.(English)00 ENG.(English)00 FRA.(French)00 FRA.(French)00 ITAL.(Italian)00 ITAL.(Italian)00 Language selection D.(German)0 FUNCTION if RGB is selected AUTO FREQ. INTERPOLATION LANGUAGE Set to OFF Input status automatic The frequency of a new signal is not display displayed received. Enlargement Set to DOUBLE. if VIDEO is selected AUTO FREQ. D.(German)0 Set to ON.
OPERATING INSTRUCTIONS (continued) Displays According to Selected DISPLAY AREA (RGB Input) ENGLISH Resolution Overall display Others (Partial display) FULL VGA (640 480) ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; Data area ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; Display area Data area FULL CENTE
OTHER FEATURES Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Item Display Registration condition Reproduction condition Sound volume Sound balance Treble Bass Mute volume Input status automatic display Enlargement Line correction Three-dimensional Y/C separation HD signal Language selection VOLUME BALANCE TREBLE BASS MUTE LEVEL AUTO FREQ. INTERPOLATION LINE INTP. 3D COMB COMPONENT LANGUAGE One set can be recorded.
OTHERFEATURES (continued) Reset (Settings Initialization) ENGLISH The EasyMenu shown to the right will be displayed when the INITIALIZE ? SELECT button is used to select DISPLAY and moreover DISPLAY INT is selected from the On-screen Display YES NO System Easy Menu 12 . If the key (select YES) of the SELECT button is pressed at this time, the user adjustment values in the table below for the signal currently being received will be deleted and the factory settings will be restored.
Set the display size to When you want to Play a 4:3 image in a 16:9 screen faithfully. Input signal (4:3 signal) 4:3 Display screen Remarks Blanking occurs on both sides. ENGLISH Displays by Selecting the DISPLAY SIZE (Video input) Play a 4:3 image in a 16:9 screen with the height and width of the middle of the PANOR. screen enlarged on equal scales and with both sides (Panoramic) appearing somewhat enlarged. The 16:9 VISTA size image in the 4:3 image is faithfully reproduced on the 16:9 screen.
OTHERFEATURES (continued) Power Save Mode ENGLISH When the RGB input jack is selected This unit meets the power-saving requirements of VESA and International Energy Program. When this unit is connected to a VESA DPMS computer, the Power Save (Standby/Suspend/Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
TROUBLESHOOTING Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. WARNING Customer servicing can be hazardous. Symptom Point to check The screen appears blank with the power-indicating lamp off. Check the way the power cable is connected. Press the power switch. ENGLISH Symptoms That Seemingly Appear to be Failures See page 6 7 9 The message “POWER SAVE” is displayed.
TROUBLESHOOTING (continued) Symptom ENGLISH 22 Point to check Flicker causes stripes to move up and down (during personal computer signal input). When the vertical frequency of the personal computer is lower than 75Hz, try increasing the frequency (upper limit: 75Hz). This may improve the situation in some cases. The temperature of the display panel surface is high. The plasma display panel is lighting the phosphors by the discharge of internal radiation.
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (display 1). The display image appears flowing (display 2) (RGB input). Display 1 Vertical streaks ABCDEFGHIJ abcdefgABCDEFGabcd ABCDEFGHIJ ENGLISH Actions to Correct Abnormal Displays Before adjustment Some characters are blurred.
TROUBLESHOOTING (continued) ENGLISH Symptom 2 Text displayed across the screen appears blurred in its entirety (display 2). A fine pattern flickers when displayed on the screen (display 3). Display 2 Display 3 Before adjustment ABCDEFGHIJ abcdefgABCDEFGabcd ABCDEFGHIJ Before adjustment ABC ABC abcdefgABCDEFGabcd Example After adjustment After adjustment ABC 1) Press MENU button to open the adjustment menu. 2) Press SELECT button several times to choose DISPLAY. 3) Press to open the DISPLAY menu.
PRODUCT SPECIFICATIONS General Specifications Type CMP402HDU Display Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal 1059 mm) dimensions Panel Resolution 1024 (H) x 1024 (V) pixels RGB input Input signals ENGLISH Product specifications and designs are subject to change without notice.
PRODUCT SPCIFICATIONS (continued) Signal Input ENGLISH RGB terminal (D-sub 15-pin connector) Pin Input signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R. video G. video or sync on green B. video No connection No connection R.GND G.GND B.GND No connection GND No connection No connection H. sync or H/V composite sync V.sync. No connection 5 15 H. sync or H/V composite sync B. video G.
The following are recommended for use with this projector (RGB input): Signal mode No. Signal name Resolution Horizontal Vertical frequency (Hz) frequency (Hz) Dot clock 640 400 70.08 31.47 25.18 2 640 480 59.94 31.47 25.18 3 640 480 72.81 37.86 31.50 4 640 480 75.00 37.50 31.50 5 800 600 56.25 35.16 36.00 6 800 600 60.32 37.88 40.00 7 800 600 72.19 48.08 50.00 800 600 75.00 46.88 49.50 9 1024 768 60.00 48.36 65.00 10 1024 768 70.07 56.48 75.