COLOUR LCD MONITOR CML152XW USER MANUAL READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your colour monitor. SERIAL No. The serial number is located on the rear of the monitor. This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS. The ENERGY STAR® emblem does not represent EPA endorsement of any product or service. As an ENERGY STAR® Partner, Hitachi,Ltd.
TCO’99 STATEMENT Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO'99 scheme which provides for an international environmental and quality labelling of personal computers.
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
Colour Monitor CML152XW USER MANUAL ENGLISH Congratulations on your selection of the HITACHI Colour Monitor. Read the instructions inside carefully, and keep this user manual for future reference. NOTE: * The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. * The reproduction, transmission or use of this documents or contents is not permitted without express written authority.
CONTENTS USING THIS DISPLAY SAFELY ......................................................................................6 WARNING................................................................................................................6 FCC STATEMENT WARNING ...........................................................................................10 FOR THE CUSTOMERS IN CANADA ................................................................................10 FOR THE CUSTOMERS IN THE UK ............
Using this Display Safely Common Safety Precautions Please read carefully and make sure you fully understand the following safety precautions: - Operations should be done according to instructions and procedures described in this manual. ENGLISH - Make sure to heed all warnings displayed on the device and manual. Neglecting to do so may result in fire or damage the device. Symbols Safety notifications are presented as shown below.
Air vents - The air vents are to prevent the internal temperature from rising. Do not place items on or so that they block the air vents. Also do not place in racks where the air vents will be blocked. This will cause the internal temperature to rise and result in fire or malfunction. - Do not place on racks that fix the display in leaning position. This will change the ENGLISH flow of air through the air vents and cause the internal temperature to rise resulting in fire or malfunction.
Impact from Dropping Do not drop, bang or subject to physical shock. Using after such incidents may result in electrical shock or fire. Power Usage ENGLISH The usable voltage is 100-120V / 200-240VAC. DO not use any other voltage. This may result in electrical shock or fire. Handling the AC adapter - DO not wet or handle with wet hands. This may result in electrical shock. - DO not use with devices other than this display. This may result in shock, fire, or damage to the device.
- CAUTION When moving the computer be careful when coming in contact with the plastic and metal edges. It is possible to be injured. Use in Unstable Places DO not place on sloping or narrow areas that are unstable. The device may drop or fall and cause injury. Display Cable - Arrange the cables so that they are out of the way. If a cable is tripped on, it may cause injury and damage to the connected devices. - DO not place heavy objects on the cable.
Storing the Plastic Bag Keep the plastic bag used to wrap the display away from young children. The bag may cause suffocation. ENGLISH FCC Statement Warning WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power outlets in your home or the cable is too short to reach a power outlet, then obtain an appropriate safety approved extension lead or consult your dealer. Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualified electrician.
Chapter 1 Installation Unpacking ENGLISH Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
4. ENGLISH 1 Connecting the Display to your Computer 1. Power off your computer. 2. Connect one end of the signal cable to the LCD Monitor's VGA port. (See Fig. 1-4) 3. Connect the other end of the signal cable to the VGA port on the PC. 4. Make sure both connections are secure.
ATTENTION This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-loaded interface cable is included in the LCD Monitor package. This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used. Connecting the AC Power ENGLISH 1. Connect the power cord to the AC adapter. (See Fig. 1-5) 2. Connect the AC adapter's DC output connector to the DC Power Jack of the monitor. 3.
1. Make sure the AC Adapter is connected to the LCD Monitor. 2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor. Power Management System This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator colour shows.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: ENGLISH Figure 2-1 1 Stereo Speakers PC Audio Stereo output. 2 Speaker Volume Control Increase Volume - Turn knob clockwise. Decrease Volume - Turn knob counter clockwise 3 DC Power Switch Press the power switch to switch the monitor ON/OFF. 4 DC Power-On Indicator LED lights Green colour --- Power is ON. LED is off --- Power is OFF.
OSD Function Menu ENGLISH To access OSD Main menu, simply press one of the Function Select Control buttons, and the menu diagram will pop up on the screen as shown below: Continue pressing the Function Selection Control buttons to scroll through the entire menu items. Attention Firmware revision may have been updated into a latest version while the version number shown on all OSD menus in this manual will stay as Ver. 1.
Phase A total of 32 scales (0 to 31) are available to adjust the focus and clarity of the display. ENGLISH Clock This function carries a frequency tracking feature that offers the user to have better stability and clarity. Increasing Clock value can be up to +64 scales. The number of decreasing Clock (minus) is depending on the input timing. Auto Adjustment This function will adjust the display size automatically to fit full screen.
Language Colour Temp Push the (+ -) button to select a different colour temperature. Please see the diagram below for function and description.
Chapter 3 Technical Information Specifications LCD Panel ENGLISH Size Display Type Resolution Display Dot Display Area (mm) Display Colour Brightness Contrast Ratio Response Time Lamp Voltage Lamp Current Viewing Angle 15.0" (38 cm) Active matrix colour TFT LCD 1024 x 768 1024 x (RGB) x 768 304 x 228 (H x V) 262K 2 200 cd/m (typical) 250: 1 (typical) (10 + 40) ms (typical) 640 Vrms (typical) 6.0 mA rms. (Typical) Vertical: -45° ~ +40° Horizontal: -60° ~ +60° Display Colours 16.
* The status of standby, suspend and Off don't include the power consumption of the audio components. Signal Separate TTL compatible horizontal and vertical synchronization Polarity Positive and negative Plug & Play Supports VESA DDC1 and DDC2B functions ENGLISH Sync Input External Connection Power Input (DC input) +12 VDC / 3.33A min. input through AC/DC adapter Video Cable 1.5M with 15-pin D-sub connector Audio Cable 1.
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. ENGLISH Resolution H – Freq. (KHz) V. Freq. (Hz) Pixel Freq. (MHz) H/V Sync. Polarity 640 x 350 31.469 70.087 25.175 +/- VGA-350 640 x 400 24.830 56.420 21.050 -/- NEC PC9801 640 x 400 31.469 70.087 25.175 -/+,-/- 640 x 480 31.469 59.940 25.175 -/- VGA-480 640 x 480 37.861 72.809 31.500 -/- VESA–480–72Hz 640 x 480 37.500 75.000 31.
most clear display. 4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment. PROBLEM There is no picture on LCD Monitor If there’s no picture on the LCD Monitor, please perform the following steps: Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running on the correct timing. Refer to Chapter 3 for information on timing. 2. Turn off the LCD Monitor and then turn it back on again.
Hitachi America, Ltd. warrants our Hitachi CRT color monitor to be free from defects in material and workmanship for 36 months from the date you purchased it if your purchase was made prior to 1/31/01 or 60 months if your purchase was made after 1/31/01 from your authorized Hitachi America, Ltd. dealer.
ENGLISH ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS MONITOR IS LIMITED TO THE 12, 36 or 60 MONTH DURATION OF THIS WRITTEN WARRANTY, AS APPLICABLE. ALL WARRANTIES SET FORTH IN THIS WARRANTY ARE LIMITED TO 12, 36 OR 60 MONTHS FROM THE DATE OF PURCHASE. NO WARRANTIES WHATSOEVER WILL COVER THIS MONITOR BEYOND THE STATED 12, 36 OR 60 MONTHS. HOWEVER, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
External parts such as cabinet. 5. Products purchased outside Canada. 6. Products used outside Canada. 7. In transit damage claims, improper handling by carrier or post offices. 8. Products or parts there of which have serial numbers removed, altered or defaced. 9. Damage defect or failure caused by, or resulting from, the operation of the unit by incorrect voltages. 10. The use of components that do not meet Hitachi specifications. 11.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.