OPERATING GUIDE IMPORTANT SAFETY INSTRUCTIONS FIRST TIME USE I1_1 5-17 THE GENIUS REMOTE CONTROL 18-29 ULTRATEC BIT-MAP ON-SCREEN DISPLAY 30-51 _-_ ASK USEFUL INFORMATION As an ENERGY STAR ® Partner, Hitachi, product 2-4 Ltd. has determined meets the ENERGYSTAR® guidelines that this for energy efficiency.
//_ IMPORTANT SAFETY INSTRUCTIONS Follow all warnings and instructions marked on this projection television.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION: SAFETY POINTS YOU SHOULD KNOWABOUT YOUR HITACHI PROJECTION TELEVISION • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions Our reputation has been built on the quality, performance, and ease of service of HiTACHi televisions. Safety is also foremost in our minds in the design of these units.
SAFETY TIPS PROTECTION t6-t AND LOCATION OF YOUR TELEVISION 17 If an outside antenna is connected to the television, be sure the antenna system is groundert so as to prov_e some protection against voltage surges and btliit-up static charges¸ Section 810 of the National Eiectecal Codel NFPA NO 70_1975_ provides information with respect to proper gretJnding of the mast anrt supporting structurel grounding Of the lead_in wire to an antenna discharge uniL size of grounding eonducto_, location of antenna disc
ACCESSORIES Check to make sure you have the following accessories PART NAME PART NO. CLU-4311UG REMOTE CONTROL HL01651 before disposing of the packing material. ILLUSTRATION wA _o O .... _ELp OOO i= oo O _U Tw_ 2. 43" TELEVISION STAND SP-43H (Not included, order separately) OPTIONAL H530047 CUSTOM HITACHI TELEVISION STAND Excellent for VCR and video-tape storage, Special features include smoked glass doors and an adjustable shelf. Available in shark grey.
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient. LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
FRONT PANEL CONTROLS FRONT VIEW IliIIlillI SODX10B/60DX10! _lr HITACHI Push open doorand 7 pull forward and down Ir .......... ooi T-oo S_LEOT EXIT _ • • • 43GX10B/50GX30B III Push open door and 7 pull forward and down o o o0000 ....... MENU/SELECT button / This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
FRONT PANEL CONTROLS (_) POWER light YOUwill see a red light when the TV is turned on. (_ PERFECT PICTURE sensor The PERFECT PICTURE sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (see page 48) (_) REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. (_ DIGITAL ARRAY Use this button to enter DIGITALARRAY (see page 38) (_) mode.
REAR PANEL JACKS REAR SPEAKER O _ONLV V_F DJ !? ® ® ® JHF S-ViDEO S-V_DEO VIDEO VIDEO v YNIDEO VIDEO @@@ (MONOyL {MONOI/L 01 01 AUDIO AUDIO INPUT 1 INPUT 2 Pa @ (MONOyL 01 AUDIO AUDIO INPUT 4 MONITOR OUT (_ ANTENNA INPUT Use an "F" type coaxial cable to connect an antenna or cable TV (CATV) output to this rear jack. (_ AUDIONIDEO INPUTS 1, 2, 4 The INPUT button will step through each video source and antenna source input each time it is pressed.
REAR PANEL CONNECTIONS _ cableTVcoaxialcable Outsideantennaor See tips on _] [? ++++ R Y PB OUTPUT DVDPlayer, Laserdisc player,etc. Cable TV Box AL_310 Nf>d _ AUDIO IN_5 2 I AUZ310 _f>dT 4 INPUT V on page12 _nOR OUt L @ Stereo System Amplifier )@©@ [_. VOUTPUT L R VCR#2 Typical full feature setup. Follow connections that pertain to your personal entertainment 11 system.
REAR SPEAKER CONNECT AFTER TURNING THE POWER TERMINAL CONNECTIONS OF THE TV OFF. Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
EXTERNAL CONNECTING CONNECTIONS EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. _EAR OF TV SET) AUDD TO HI_ITERM _AL % O o_o _x_ZZ_-_ EXTERNAL AUD ]D AM PL]FER SPEAKERS NOTE: EXTERNAL SPEAKERS To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the TV set.
CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder, laserdisc player, and DVD player to your TV set is dependent on the model and features of each component. Check the owner's manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features.
CONNECTING CONNECTING EXTERNAL VIDEO SOURCES A STEREO VCR OR STEREO LASERDISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) 4. Press the INPUT button to view the program from the VCR or laserdisc approximately eight seconds.
CONNECTING CONNECTING 1. Connect A STEREO LASERDISC EXTERNAL VIDEO SOURCES PLAYER OR DVD PLAYER TO INPUT 4. the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 4 (Y) jack as shown on the TV set below. 2. Connect the cable from the PB OUT, CB OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 4 (PB) jack, as shown on the TV set below. 3.
AUDIO SYSTEM SETUP Match the numbers below to the diagram for speaker placement and refer to the table for the different surround sound requirements. (_The television's internal speakers. (_) These speakers are connected to a separate audio amplifier. Use the "AUDIO TO HI-FI" output on the TV. _ These speakers are connected to the REAR SPEAKER 8 Ohm output on the TV. [ @ @ © Q © _ .......................................................
THE REMOTE CONTROL In addition to controlling all the functions on your HITACHI Color TV, the new remote control is designed to operate different types of VCRs, DVD, CATV (Cable TV), and satellite converters with one touch. Basic operation keys are grouped together in one area. To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The remote will now control your television.
HOW TO USE THE REMOTE TO CONTROL YOUR TV A detailed explanation of the circled numbers follows on pages 20 to 22. r (_) TV POWER button Press this button to turn the TV set On or Off m= _ POWER "iV CBL/SAT 0 0 DVDNCR 0 (_ PICTURE-IN-PICTURE -See separate section on pages 23-25 for a detailed description. (_) HELP button -----------------Press this button to display or cancel the help messages of the On-Screen Display.
HOW TO USE THE REMOTE TO CONTROL YOUR TV (_TV POWER button Press this button to turn the TV set on or off, STATUS button Use the STATUS function to check the channel being received, or if it has stereo (ST) or second audio (SAP), iVideo Audio Broadcast -- ,STEREO ST/SA jCHANNEL AN 10 YUTA 10:00pm PiP ANT 12 ID VIDEO DISC10:00pm PIP ANT 12 --Time Input --When a laserdisc player is connected _Sub Picture Source _Theater Mode Illllltttll I • (_) Iltttlllllll ,i MENU, SELECT, CURSOR buttons
HOW TO USE THE REMOTE TO CONTROL YOUR TV (_) INPUT button The INPUT button will select between the antenna signal and the video inputs. If the Sub-picture is on, and the main picture is chosen with the PIP CH button, the main picture will alternate between the video inputs and antenna source by every press of the INPUT button. If the Sub-Picture is chosen with the PIP CH button, the Sub-Picture will alternate between the video inputs and Antenna source by every press of the input button.
HOW TO USE THE REMOTE TO CONTROL YOUR TV (_ VOLUME, MUTE buttons Press the VOLUME up (A) or clown (_') button until you obtain the desired sound level. To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button. Press the MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one more time, or press the VOLUME up (A) button.
PICTURE-IN-PICTURE (PIP) Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment, This Dual Tuner feature allows you to view the antenna input on both the main picture and sub-picture simultaneously, with separate tuning control for each.
PICTURE-IN-PICTURE (PIP) SWAP button If you wish to switch what is being shown on the main picture to the Sub-Picture, press the SWAP button. _-Gray background _-Green color (_) MOVE button To move the sub-picture to another corner, press the MOVE button, Tthe sub-picture moves one step counterclockwise time the MOVE button is pressed.
PICTURE-IN-PICUTRE (_ (PIP) FREEZE button If you wish to freeze the Sub-Picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again. FREEZE Quick FREEZE button Press this button without a Sub-Picture to freeze the picture you are currently viewing. normal viewing.
USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR. (refer to page 29) 1. 2. 3. 4. Turn ON your VCR. Aim the remote control at the front of your VCR. Press the DVDNCR button to switch to the VCR pre-coded mode. Hold down the DVDNCR button on the remote, enter the two digit preset code that matches your VCR as shown on page 29.
USING THE REMOTE TO CONTROL DVD FUNCTIONS Operating the preceded function for your DVD Player. This remote is designed to operate different types of DVD Players. of your DVD Player. (refer to page 29) You must first program the remote to match the remote system 1. 2. 3. 4. Turn ON your DVD Player. Aim the remote control at the front of your DVD Player. Press the DVDNCR button to switch to the DVD Player pre-coded mode.
USING THE REMOTE TO CONTROL CABLE BOX/SATELLITE FUNCTIONS Operating the precoded function for your cable/satellite box. This remote is designed to operate different types of cable boxes and satellite systems. You must first program the remote to match the remote system of your cable/satellite box. (refer to page 29) 1. 2. 3. 4. Turn ON your cable/satellite box. Aim the remote control at the front of your cable/satellite box. Press the CBL/SAT button to switch to the cable/satellite box pre-coded mode.
CABLE, SATELLITE, VCR, AND DVD CODES CABLE BRAND CODE General Instrument ......................... 17 Hamlin ........................... 22,23,24,25 Jerrold ............... 00,01,02,03,04,05,06,07,21 Oak ............................... 26,27,28 Panasonic ........................... 18,19,20 Pioneer ............................... 13,14 Scientific Atlanta ...................... 08,09,10 Tocom ................................ 15,16 Zenith ................................ 11,12 SATELLITE BRAND Ecostar ......
ULTRATEC OSD 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the CURSOR buttons to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. HELP MENU 0 4. Press HELP on the remote control when a menu is displayed, and text will appear giving a description of that menu. 0 EXIT 0 This part of the screen shows what selections are available.
ULTRATEC OSD Ill SETUP ®®@ • I CUSTOMIZE ITHEATER I MENU LANGUAGE SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET DIGITAL ARRAY Choose English, French, or Spanish text. Select Antenna or Cable "iV. ;HANNEL ID VIDEO ID. FAMILY FAVORITES PARENTAL CONTROL EVENT PROGRAM AUTO LINK CLOSED CAPTION MENU BACKGROUND Label channels PAY1, ABC, etc. Label video inputs VCR1, DVD1, etc Allows you to set and view favorite channels. Block channel picture and sound.
SET UP Select SETUP when setting your TV up for the first time. function desired. Menu I Digital Array Menu I To Menu Bar To Quitl Exit To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds. Press the EXIT button to end the auto-demonstration. MENU LANGUAGE Cursor Set Channel Memory Channel List Clock Set @-----.
SET UP I I Select ANTENNA if you are using an indoor or outdoor antenna. SIGNAL SOURCE Menu Select CATV if you have cable TV.
SET UP I AUTO CHANNEL SET II This feature will automatically store activeUP TV(A) channels in CHANNEL MEMORY, This will allow you to skip unused channels when using CHANNEL or DOWN (_').
SET UP I CHANNEL MEMORY II Use this function AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL • or • after buttons.
SET UP I CHANNEL LIST II This function allows you to review and which channels are labeled in CHANNELCONTROL ID (ID.), which have been added to CHANNEL MEMORY (SCAN), which are protected by PARENTAL (LOCK).
SET UP I CLOCK SET I The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT. Menu Language Signal Source Auto Channel Set Channel Channel Clock Set -- : - -AM Menu Jan I To Menu Memory List Clock Digital Set Array Menu I ToMenu Bar CURSOR 01 2001 Bar CURSOR TO Quitl Exit ToQuit I Exit Clock Set - - : --AM Menu Mar 01 2001 I To Menu Bar Use CURSOR • or • to set the time, date, and year.
SET UP I DIGITAL ARRAY I Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence".
CUSTOM This selection CHANNEL ID contains advanced features which will make TV viewing easier and more enjoyable, ] Use this feature to give up to 20 channels a name when ANTENNA ] channels a name when CATV1 signal source is selected. signal source is selected and up to 60 Channel Channel Id. Video Id. Cursor _, Family Favorites Parental Control Id. Ch 22 Ch. List Custom [] Erase 4 Event Program Auto Link Closed Caption Next Ch Menu ChA ChV Background Ch.
CUSTOM I VIDEO ID. I Use this feature to give a name to any of the four video inputs. Channel Video VIDEO Id. ID. ®VID1 Id. OVID2 OVID Family Favorites Parental Control Closed Caption Menu Background I To Menu OVID Vid List Custom [--IReset 4 Event Program Auto Link Menu 3 Bar TO Quit I Exit Menu I To Menu 4 VID1 Bar To Quitl Exit Cursor VIDEO VIDEO ID. ®VID 1 OViD =I _ Mid. List Custom [] OVID 3 Reset 2 ID.
CUSTOM FAMILY FAVORITES (MENU) This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 24 channels can be stored in the FAMILY FAVORITES function. Channel Id.
CUSTOM I FAMILY FAVORITES (OPERATION) II Use nel. this function to display FAMILY FAVORITES selection to tune the main picture to a desired favorite chan- CURSOR CURSOR To Quit To Quit Select a category using CURSOR < or • buttons. Use CURSOR <, •, • or • buttons to highlight a favorite channel and the TV will automatically Press EXIT to remove FAMILY FAVORITES OSD from the screen. 42 tune to that channel.
CUSTOM This function will block out the picture and sound of the selected channel or video input. I PARENTAL CONTROL I It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter PARENTAL CONTROL is a four digit secret code number. Use the number buttons to select secret code. Channel Video The factory preset cede is 0000.
CUSTOM I I 4 EVENT PROG. This function will automatically turn the TV on and off, one time only, every day or once a week.
CUSTOM AUTO LINK I Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input.
CUSTOM I CLOSED CAPTION Channel Video I Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen, Your local TV program guide denotes these programs as r_ or Id Closed Id.
VIDEO I Select VIDEO to adjust picture settings and improve picture quality. Contrast 4_1_ 75% Brightness <1_1_ 50% Color Tint 41_1_ ,/l_ 50% Sharpness 4EI_ 50% Reset Advanced [] Cursor Settings Menu Contrast Menu 4/1_ To Menu Bar To Menu Bar To Quit 100% To Quit Exit Contrast Exit Menu I To '_ Menu Bal Ib 85% To Quit I Exit Use the CURSOR • or • buttons to highlight the function to be adjusted. Press the CURSOR _1 or 1_ buttons to adjust the function.
VIDEO I ADVANCED SETTINGS I Your settings HITACHI to produce Projection the highest TV has quality a PERFECT picture possible. PICTURE function which will automatically adjust picture When PERFECT PICTURE is highlighted, press SELECTto turn the PERFECT PICTURE on or off.
AUDIO Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality. BASS _1_1_ TREBLE _1_ BALANCE RESET 50% BASS <1_ TREBLE "_1_ _1_1_ BALANCE _1_1_ [] RESET [] I1_50% ADVANCED I To Menu Bar 50% ADVANCED SETTINGS Menu I_ 90% SETTINGS To Quit I Exit Menu To Menu Bar To Quit Exil Use CURSOR • or • to highlight the function to be adjusted. Press CURSOR _1 or • to adjust the function. Press EXIT to quit MENU.
AUDIO ] ADVANCED SETTINGS Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
THEATER Use this function to choose picture and audio settings for a true home THEATER experience. I THEATER MODES I Use this function to choose from automatic picture and audio settings to optimize your TV's performance.
_ ASK _ 1 CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a dry cloth. Place your television away from extreme heat, humidity, and extremely dusty places. Remove the plug from the wall outlet if your television when you go on vacation. will not be used for a long period of time, for instances, DO NOT Do not clean your screen or cabinet with strong cleaners, polishes or a chemically treated cloth.
RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
USEFULINFO SYMPTOMS No Picture, no sound • Sound OK, picture poor • • • • • • • • • • • • Picture OK, sound poor • • • • • • Picture blurred • • • • • • Lines or streaks in picture • • • • • Poor reception on some channels • • • • • Picture rolls vertically • • • • • aocolor • • • • • • Poor color • • • • • • • HITACHI Projection Television incorporates advanced power surge protection technology designed to protect against component or circuit da
SPECIFICATION Features: Superfine Picture Quality 850 Line Horizontal Resolution Pure Green and Red Filter Lenses PERFECT PICTURE System Remote (Controls many DVDNCR brands, cable boxes, and satellite boxes.
USEFULINFO H ITAC H I To locate an authorized HITACHI service facility in the continental U.S.A. only. DIAL TOLL FREE 7 days a week, 24 hours a day (1-800-448-2244) Hitachi America, Ltd. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will you with convenient and expedient assistance.
NOTES 57
NOTES 58
NOTES 59
HITACHI QR47632