PROJECTION COLOR TV 50EX01B 60EX01B OPERATING GUIDE IMPORTANT SAFEGUARDS FIRST TIME USE SET UP CUSTOM VIDEO AUDIO THEATER INFO 2-4 5-17 THE GENIUS REMOTE CONTROL 18-27 ULTRATEC BIT-MAP ON-SCREEN DISPLAY 28-53 USEFUL INFORMATION INDEX 54-58
IMPORTANT Follow all warnings and instructions marked on this projection television. RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
SAFETY TIPS IMPORTANT SAFEGUARDS CAUTION: SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI PROJECTION TELEVISION ¥ Read all of these instructions. ¥ Save these instructions for later use. ¥ Follow all warnings and instructions marked on the television. Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units.
SAFETY TIPS PROTECTION AND LOCATION OF YOUR TELEVISION 16-1. If an outside antenna is connected to the television, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, NFPA No.
ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material. POWER TV CABLE VCR HELP PIP CH TV/VCR PIP REC SWAP MOVE STOP FRZ PAUSE EXIT MENU RECALL VOL LST-CH CH MUTE LIGHT 1 2 3 4 5 6 7 8 INPUT 9 SLEEP 0 CLU-436UI 1. 2. 1. Remote Control Unit CLU-436UI (Part No. HL00728). 2. Two AA size, 1.5V batteries (For Remote Control Unit). REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1.
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient. LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
FRONT PANEL CONTROLS FRONT VIEW INPUT MENU EXIT VOL- VOL+ CH- CH+ POWER MENU button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. INPUT/EXIT button Press this button to select the current antenna source, VIDEO: 1 or 2. Your selection is shown in the top right corner of the screen. This button also serves as the EXIT button when in MENU mode.
FRONT PANEL CONTROLS POWER light You will see a red light when the TV is turned on. AI (Artificial Intelligence) sensor The Artificial Intelligence sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (see page 48) REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc.
FIRST TIME USE STOP CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS. (Such damage is NOT COVERED by your television warranty) VHF/UHF S-VIDEO S-VIDEO CB 8 ONLY R VIDEO VIDEO L COMPONENT VIDEO Y REAR SPEAKER CR VIDEO (MONO) (MONO) L L L L R R SP. MATRIX SURROUND R AUDIO AUDIO INPUT 1 INPUT 2 MONITOR OUT EXT.
FIRST TIME USE Outside antenna or cable TV coaxial cable 2-Way signal splitter STOP CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS. (Such damage is NOT COVERED by your television warranty) VHF/UHF S-VIDEO S-VIDEO COMPONENT VIDEO Y REAR SPEAKER CB Y CB CR L OUTPUT CR 8 ONLY R VIDEO VIDEO L (MONO) (MONO) L L VIDEO L L R R SP. MATRIX SURROUND R R AUDIO AUDIO R AUDIO INPUT 1 INPUT 2 MONITOR OUT DVD Player, Laserdisc player, etc. AUDIO TO HI-FI EXT.
REAR SPEAKER TERMINAL CONNECTIONS CONNECT AFTER TURNING THE POWER OF THE TV OFF. Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
EXTERNAL CONNECTIONS CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below.
CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder, laserdisc player, and DVD player to your TV set is dependent on the model and features of each component. Check the owner s manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) jack. 4. Press the INPUT button to view the program from the VCR or laserdisc player.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2. 1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below. 2. Connect the cable from the C B OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (CB) jack, as shown on the TV set below. 3. Connect the cable from the C R OUT or R-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (CR ) jack, as shown on the TV set below. 4.
AUDIO SYSTEM SETUP Match the numbers below to the diagram for speaker placement and refer to the table for the different surround sound requirements. The television s internal speakers. These speakers are connected to a separate audio amplifier. Use the AUDIO TO HI-FI These speakers are connected to the Rear Speaker 8 Ohm output on the TV. output on the TV. L R L L R OUT L R IN STEREO SYSTEM AMPLIFIER S S SURROUND FEATURE SURROUND SWITCH* REQUIRED CONNECTION OFF SP.
THE GENIUS REMOTE CONTROL (CLU-436UI) In addition to controlling all the functions on your HITACHI Color TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV), and satellite converters with one touch. Basic operation keys are grouped together in one area. To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The remote will now control your television.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV POWER TV CABLE VCR HELP PIP CH TV/VCR PIP REC SWAP MOVE STOP FRZ PAUSE EXIT MENU RECALL VOL LST-CH CH MUTE LIGHT 1 2 3 4 5 6 7 8 9 INPUT SLEEP 0 CLU-436UI POWER button Press this button to turn the TV set on or off when the remote is in TV mode. If a SPECIAL EVENT REMINDER is set, it will be displayed when the TV is first turned on.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV PICTURE-IN-PICTURE buttons See separate section on page 22 for a description. PIP CH button Use the PIP CH button to select between main picture and sub-picture tuning. The channel number which is highlighted indicates which channel is being controlled. HELP button 50EX01B/60EX01B models do not have HELP feature. LAST CHANNEL (LST-CH) button Use this button to select between the last two channels viewed.
HOW TO USE THE REMOTE TO CONTROL YOUR TV EXIT/RECALL button Press this button when no menu is displayed, when you want to check the channel being received, the picture source, or if it has stereo (ST) or second audio (SAP), the time, CHANNEL ID, if SPECIAL EVENT REMINDER is set, and if the SLEEP timer is set. When in MENU mode, this button will exit all On-Screen Displays.
PICTURE-IN-PICTURE (PIP) Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna input on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one ANTENNA Input. ANTENNA input can be viewed as both the main picture and the sub-picture simultaneously. COMPONENT VIDEO: Y-CBCR INPUT 2 sources can only be viewed as a main picture.
PICTURE-IN-PICTURE (PIP) PICTURE-IN-PICTURE CONT. SWAP button If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button. ANT 10 VIDEO: 1 SWAP VIDEO: 1 ANT 10 MOVE button To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step counterclockwise every time the MOVE button is pressed. (Example below illustrates the MOVE operation for initial shipping conditions.
PICTURE-IN-PICTURE (PIP) FREEZE (FRZ) button (With PIP ON) If you wish to freeze the sub-picture, press the FRZ button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FRZ button again. FREEZE (FRZ) button with PIP OFF (Quick Freeze) Press the FRZ button without a sub-picture to freeze the picture you are currently viewing. Press this button again to return to normal viewing.
USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR. (refer to page 27) 1. Turn ON your VCR. 2. Aim the remote control at the front of your VCR. 3. Press the VCR button to switch to the VCR pre-coded mode. 4. Hold down the VCR button on the remote, enter the two digit preset code that matches your VCR as shown in page 27.
USING THE REMOTE TO CONTROL CABLE BOX/SATELLITE FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system in your cable box. (refer to page 27) 1. Turn ON your cable box. 2. Aim the remote control at the front of your cable box. 3. Press the CABLE button on the remote to switch to cable mode. 4.
CABLE/SATELLITE, VCR, AUDIO and DVD CODES (CLU-436UI) VCR BRAND CODE Adventura . . . . . . . . . . . . . . . . . . . . . . . . . . . . .00 Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .00 Akai . . . . . . . . . . . . . . . . . . . . . .13, 19, 21, 26, 39 American High . . . . . . . . . . . . . . . . . . . . . . . . .07 Asha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Audiovox . . . . . .
SET UP CUSTOM VIDEO AUDIO THEATER INFO ULTRATEC OSD 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the CURSOR buttons to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. HELP MENU EXIT This part of the screen shows what selections are available.
ULTRATEC OSD SET UP CUSTOM VIDEO AUDIO SET UP CUSTOM VIDEO AUDIO THEATER INFO MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET CONVERGENCE ADJ. Choose English, French, or Spanish text. Optimum hook up for your system. Select Antenna or Cable TV. First time set up for channel buttons. Channel buttons, add, skip. Check channel name, scan, and child lock. Set before using timer features. Match red, green, and blue colors to make white. CHANNEL ID.
SET UP SET UP Select INITIAL SETUP when setting your TV up for the first time. Use the CURSOR or on the remote to highlight the function desired. SET UP SET UP CUSTOM VIDEO AUDIO THEATER M ENU LAN GU AGE PL UG & PLAY SIGNAL SOU R C E AUTO C H AN N E L SE T CHANN EL ME MORY CHANN EL LIS T CL OCK SE T CONVE R GEN C E AD J. MENU TO QUIT NOTE: INFO EXIT To see an auto-demonstration of the on-screen displays, press and hold the POWER button on the TV set for approximately five seconds.
SET UP SET UP PLUG & PLAY This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer two questions and a graphic will be displayed, showing you the optimum setup for your personalized system. SET UP CUSTOM VIDEO AUDIO THEATER INFO CURSOR M E N U L A N G UAGE P L U G & P L AY S I G N A L S O URCE AUTO C H A N N EL SET C H A N N E L M EM ORY C H A N N E L L I ST CLOCK SET C O N V E R G E N CE ADJ.
SET UP SET UP Select ANTENNA if you are using an indoor or outdoor antenna. Select CATV if you have cable TV. SIGNAL SOURCE SET UP CUSTOM VIDEO AUDIO THEATER CURSOR M ENU LAN GUAGE PL UG & PLAY SIGNAL SOU R C E AUTO CH AN N E L SE T CHANNE L ME MORY CHANNE L LIS T CL OCK SE T CONVER GE N C E AD J.
SET UP AUTO CHANNEL SET SET UP This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip unused channels when using CHANNEL UP ( ) or DOWN ( ). SET UP CUSTOM VIDEO AUDIO THEATER CURSOR MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET CONVERGENCE ADJ.
SET UP SET UP CHANNEL MEMORY Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL or buttons. SET UP CUSTOM VIDEO M ENU LAN GUAGE PL UG & P LAY SIGNAL S OU R C E AUTO CH A N N E L SE T CHANN E L ME MORY CHANN E L LIS T CL OCK SE T CONVER GEN C E AD J.
SET UP CHANNEL LIST SET UP This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added to CHANNEL MEMORY (SCAN), and which are protected by PARENTAL CONTROL (LOCK). SET UP CUSTOM VIDEO AUDIO THEATER INFO CURSOR M ENU LAN GUAGE PL UG & P LAY SIGNAL S OU R C E AUTO CH AN N E L SE T CHANN EL ME MORY CHANN EL LIS T CL OCK SE T CONVE R GEN C E AD J.
SET UP SET UP CLOCK SET The time must be set before you can use the CALENDAR, 4 EVENT PROGRAM, SPECIAL EVENT REMINDER, or TV TIME OUT. SET UP CUSTOM VIDEO AUDIO THEATER INFO M ENU LA N GUAGE PL UG & PLAY SIGNAL S OU R C E AUTO CH A N N E L SE T CHANNEL ME MORY CHANNEL LIS T CL OCK S E T CONVER GEN C E AD J.
SET UP SET UP CONVERGENCE ADJUST Your Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called convergence . To simplify convergence, the following feature allows you to display a test pattern of horizontal and vertical lines on the screen.
CUSTOM CUSTOM This selection contains advanced features which will make TV viewing easier and more enjoyable. CUSTOM CHANNEL ID. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CATV1 signal source is selected. SET UP CUSTOM VIDEO CURSOR MENU SET UP CUSTOM VIDEO CHANNEL ID. CH 2 2 CHANNEL L IST CUST OM CH.
CUSTOM CUSTOM VIDEO ID. Use this feature to give a name to any of the two video inputs. SET UP CUSTOM VIDEO AUDIO THEATER SET UP CUSTOM VIDEO INFO C H A N N EL ID. V I D E O ID. FA M I LY FAVORIT ES P A R E N T AL CONT ROL 4 E V E NT PROGRAM A U T O L INK C L O S E D CAPT ION M E N U BACKGROUND F I R S T T IM E T OUR MENU TO MENU BAR SET UP CUSTOM VIDEO V I D E O ID. VID 1 VIDEO L IST C UST OM R E SET MENU TO MENU BAR Press Press Press Press CURSOR CURSOR CURSOR CURSOR V ID EO ID .
CUSTOM CUSTOM FAMILY FAVORITES (MENU) This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 24 channels can be stored in the FAMILY FAVORITES function. SET UP CUSTOM VIDEO AUDIO THEATER C H A N NEL ID. V I D E O ID.
CUSTOM FAMILY FAVORITES (OPERATION) CUSTOM Use this function to display FAMILY FAVORITES selections as sub-pictures or to tune the main picture to a desired favorite channel. CH 12 FA MILY FAVOR ITE S CURSOR MOV IES 3 6 8 10 M E N U TO S U R F TO Q U I T EXIT Select a category using CURSOR or buttons. Use CURSOR , , or buttons to highlight a favorite channel and the TV will automatically tune to that channel. Press EXIT to remove FAMILY FAVORITES OSD from the screen.
CUSTOM CUSTOM PARENTAL CONTROL This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter PARENTAL CONTROL is a four digit secret code number. The factory preset code is 0000. Use the number buttons to select secret code. SET UP CUSTOM VIDEO AUDIO THEATER C H A NNEL ID. V I D E O ID.
CUSTOM CUSTOM 4 EVENT PROG. This function will automatically turn the TV on and off, one time only, every day or once a week. SET UP CUSTOM VIDEO AUDIO THEATER INFO CHANN E L ID . VIDEO ID .
CUSTOM CUSTOM AUTO LINK Use this function to automatically turn the TV on and tune to VIDEO: 1 or 2 when it detects a VIDEO input. SET UP CUSTOM VIDEO C H ANNEL ID. V I D EO ID. FA MILY FAVORIT ES P A RENT AL CONT ROL 4 E VENT PROGRAM A U TO L INK C L OSED CAPT ION M E NU BACKGROUND F I R ST T IM E T OUR MENU TO MENU BAR AUDIO THEATER INFO SET UP CUSTOM VIDEO C H A N N E L ID . V ID EO ID .
CUSTOM CUSTOM Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which . are displayed on the TV screen. Your local TV program guide denotes these programs as CC or CLOSED CAPTION SET UP CUSTOM VIDEO AUDIO THEATER INFO SET UP CUSTOM VIDEO C H A N NEL ID. V I D E O ID.
CUSTOM CUSTOM This function introduces you to the First Time Tour Setup Feature, showing you basic TV functions as well as helping you set up your TV or Home Theater System. This feature will be displayed every time your TV is turned on, unless you set FIRST TIME TOUR to OFF. FIRST TIME TOUR SET UP CUSTOM VIDEO POWER ON POWER INTRODUCES YOU TO THE FIRST TIME SETUP FEATURE. SHOWING YOU THE OPTIMUM SETUP GUIDE FOR YOUR PERSONALIZED SYSTEM. AFTER 10 SECONDS ALWAYS SHOW FIRST TIME TOUR AT POWER ON.
VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality.
VIDEO VIDEO ADVANCED SETTINGS Your HITACHI Projection TV has an Ultra AI (Artificial Intelligence) function which will automatically adjust picture settings to produce the highest quality picture possible. When AI is highlighted, use CURSOR to turn the AI on or off.
AUDIO AUDIO Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality. AUDIO SET UP CUSTOM VIDEO AUDIO THEATER INFO SET UP CUSTOM VIDEO CURSOR BASS T REBL E BAL ANCE RESET ADVANCED SET T INGS MENU MENU TO MENU BAR 72% 50% TO QUIT CURSOR EXIT AUDIO THEATER BASS TR E B LE B A LA N C E RESET ADVANCED SE TTIN GS MENU TO MENU BAR INFO 90% 50% TO QUIT EXIT Use CURSOR or to highlight the function to be adjusted. Press CURSOR or to adjust the function.
AUDIO AUDIO ADVANCED SETTINGS Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
THEATER THEATER Use this function to choose picture and audio settings for a true home THEATER experience. THEATER THEATER MODES Use this function to choose from automatic picture and audio settings to optimize your TV s performance.
INFO INFO This function allows your TV to assist you with your busy day-to-day schedule. INFO SPECIAL EVENT REMINDER Use this function to set up to six special events into memory. These events can then be viewed in CALENDAR mode.
INFO INFO CALENDAR Use this function to check the day, month, and year. Dates programmed in SPECIAL EVENT REMINDER will appear blinking and special event message will be displayed.
CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your television away from extreme heat, humidity, and extremely dusty places. Remove the plug from the wall outlet if your television will not be used for a long period of time, for instances, when you go on vacation.
RECEPTION PROBLEMS ¥ IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ¥ GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
rd ss TV i ure Try SYMPTOMS wit cor is p rec lug t ge d an che in oth d''O er N" cha Ch nn eck el ( an sta ten tion na Ch tr o eck con ub ne an le) ctio ten ns na Ch (ba for eck c b k r ou oke of T tsid n le V) Ch ea ad eck nte -in nn for w a ire loc al i Ad nte jus tC r fe ren on t ras ce Ad t co jus ntr tB o rig l h tne Ad ss jus con tC tr o olo l r Ad con jus tr o tT l int con Ad tr o jus l tV olu me con tr o l CH TR ECK Y T TH HE ES Be SE E I sur AD TEM ee xte JU Be rna ST S AN sur l co ME D ep
SPECIFICATIONS Features: ¥ Superfine Picture Quality\ 850 Line Horizontal Resolution ¥ Pure Green and Red Filter Lenses ¥ Artificial Intelligence System ¥ Remote (Controls many VCR brands, cable boxes, and satellite boxes.
USEFUL INFO e c i v r e s To locate an authorized HITACHI service facility in the continental U.S.A. and Canada, DIAL TOLL FREE 7 days a week, 24 hours a day 800 HITACHI (1-800-448-2244) Hitachi America, LTD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
NOTES 59
QR43664