OPERATING GUIDE IMPORTANT SAFEGUARDS FIRST TIME USE '-__ _ 4-20 THE GENIUS REMOTE CONTROL 21-33 ULTRATEC BIT-MAP ON-SCREEN DISPLAY 34-59 ASK LL_-I_:_ __, '__ 2-3 USEFUL INFORMATION INDEX 60-67
IMPORTANT SAFETY INSTRUCTIONS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI TELEVISION Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain from it to the proper operation of your HITACHI television.
IMPORTANT SAFETY INSTRUCTIONS Read before operating 15. Televisions are designed to comply with the recommended safety standards for tilt and stability. Do not apply excessive pulling force to the front, or top, of the cabinet which could cause the product to overturn resulting in product damage and/or personal injury. 16. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer. 17.
ACCESSORIES Check that you have the following accessories before disposing of the packing material. 1. Remote Control Unit. 2. Two AA size, 1.5V batteries (For Remote Control Unit). For information regarding how to obtain these accessories, please call TOLL FREE 1-800-448-2244 for your nearest HITACHI Authorized Parts Distributor in the continental United States. For Alaska please contact your nearest HITACHI regional office. PARTNAME [ PARTNO. [ ILLUSTRATION @...... @ (2b dO _ _b ....
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1. 2. 3. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers, and pulling the cover off. Insert two new AA size batteries in the remote. When replacing old batteries, push them towards the springs and lift them out. Match the batteries to the (+) and (-) marks in the battery compartment. 4. Replace the cover. BOTTOM VIEW I, Lift up on tab to remove back cover.
HOW TO SET UP YOUR NEW HITACHI COLOR TV ANTENNA Unless your color TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient. LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
FRONT PANEL CONTROLS O MENU button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. Q INPUT/EXIT button Press this button to select the current antenna source, VIDEO: 1, 2, 3 or alternate antenna source. top right corner of the screen. This button also serves as the EXIT button when in MENU mode.
FRONT PANEL CONTROLS H_I I I ooo PUSH HITACHI ® ® Channel Volume Buttons Buttons ¢]¢] POWER 0 F] LED CH CH 0 • I + VOL 0 0 • • VOL + INPUT 0 0 _ ICURSOR_ ........
FRONT PANEL JACKS AND CONNECTIONS The front panel jacks are provided as a convenience examples: to allow you to easily connect a camcorder '"' v_2oO or VCR as shown in the following @ooo JT 3 LAUDI°J _/ / / INPUT
REAR PANEL JACKS O ® ® ANT A TO CONVERTER rS-VIDE0 ANT B S-VIDE0 S-VIDE0 @ @ @ VIDEO @ @ (MONO}< AUDIO AUDIO AUDIO TOHI-FI INPUT 1 INPUT 2 j t ® O AUDIO MONITOR OUT t @ ® Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.
REAR PANEL JACKS Q Component: Y-PBPR Input Input 2 provides Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. NOTES: 1. DO NOT connect standard VIDEO or S-VIDEO to Input 2 when using Y-PBPR input. 2. When using the Y-PBPR input jacks, connect your components 3. Your component the components audio output to the TV s Input 2 Left and Right Audio input jacks. output may be labeled Y, B-Y, and R-Y.
REAR SPEAKER TERMINAL CONNECTIONS TYPICAL FULL-FEATURE SETUP Cable TV Box VCR#2 I INPUT @oo_ S-VIDEO V L I I I I Oo ooOo Stereo System Amplifier I I I I i i i Ill lllll / Optional, see tips onpage14 R-VIDEO @O V OL _R].4._OR_._ OUTPUT Laserdisc player, VCR, camcorder, etc. NOTE: 1. 2. y_ _PB _PR p OUTPUT R_ HDTVSet-Top Box Connect only 1 component to each input jack. Follow connections that pertain to your personal entertainment 13 system.
TIPS ON REAR PANEL CONNECTIONS TIPS ON REAR PANEL CONNECTIONS S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. If your device has only one audio output (mono sound), Refer to the operating guide of your other electronic connect it to the left audio jack on the television. equipment for additional information on connecting your hook-up cables.
CONNECTING CONNECTING EXTERNAL AUDIO SOURCES EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. REAR PANEL OF TELEVISION AN Y/\ • °°1 AUDIO TO HI-FI To Audio Input Terminal of External Amplifier INPUT O 0 0 _ O ====° r_lr_loo Q ,llll llllll [] Stereo System NOTE: 0 0 Q Amplifier To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust th
CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner's manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. However you may need to modify them to accommodate your particular assortment of components and features.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 4.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO VCR OR LASERDISC PLAYER 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 4.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO LASERDISC/DVD PLAYER OR HDTV SET TOP BOX TO INPUT 2 COMPONENT: Y-PBPR . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below. 2. Connect the cable from the CB/P B OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack. 3.
_0 SYSTEM SETUP Match the numbers below to the diagrams for speaker placement and refer to the table for the different surround sound requirements. (See page 58 for SRS and BBE functions.) The television s internal speakers. These speakers are connected to a separate audio amplifier. Use the Audio to HI-FI output on the television.
THE GENIUS REMOTE CONTROL ICLU-577TSI) In addition to controlling all the functions on your HITACHI color TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area. To operate your TV, point the remote control at the remote indicating that the remote will now control your television. sensor of the TV and press the TV button.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV ® REC HITACHI CLU-577TSI POWER button Press this button to turn the TV set on or off when the remote is in TV mode. O TV button When the TV button is _ressed, it will blink, to indicate the remote is in TV mode. VCR button When the VCR button Js _ressed, it will blink to indicate the remote is in VCR mode. (see page 28) @ CABLE (CBL) When the CABLE button Js pressed, it will blink to indicate the remote is in CABLE mode.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV O AV1, AV2, AV3 buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video mode. (see page 32) CHANNEL selector buttons CHANNEL selector buttons are used to set FAMILY FAVORITES, CHANNEL MEMORY, etc. Enter one, two, or three numbers to select channels. Enter 0 first for channels 1 to 9, or simply press the single digit channel you wish to tune then wait a few seconds for the TV to tune.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV ASPECT button Press this button to quickly change the aspect ratio of the viewable video between 4:3 and 16:9. (See page 55 for more information) COMMERCIAL SKIP (C.S.) button Press this button repeatedly to select channel skip time (30-180 seconds) when no menu is displayed and the TV will tune to the last channel viewed when the selected amount of time is up.
PICTURE-IN-PICTURE {PIP) Your HITACHI Color TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B). ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B can only be viewed as a main picture.
PICTURE-IN-PICTURE PICTURE-IN-PICTURE CONT. SURF MODE PIP This feature will automatically the right edge of the screen. scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Press the PIP button a second time to remove the sub-pictures from the screen. 1. 2. 3. 4. Q along PIP PIP NOTES: (PIP) If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory.
PICTURE-IN-PICTURE (_) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again. NOTE: (_) (PIP) The FREEZE function will only operate when SINGLE PIP mode is chosen.
USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. VCR. (refer to page 33 for pre-codes) You must first program the remote to match the remote system of your 1. Turn ON yourVCR. 2. Aim the remote control at the front of your VCR. 3. Press and release the VCR button to switch to VCR pre-coded mode. 4.
USING THE REMOTE TO CONTROL Operating the precoded function CABLE BOX FUNCTIONS for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box. (refer to page 33) 1. Turn ON your cable box. 2. Aim the remote control at the front of your cable box. 3. Press and release the Cable (CBL) button to switch to Cable pre-coded mode. 4.
USING THE REMOTE TO CONTROL Operating the precoded function SATELLITE RECEIVER FUNCTIONS for your satellite receiver. This remote is designed to operate different types of satellite systems. You must first program the remote to match the remote system of your satellite receiver. (refer to page 33) 1. Turn ON your satellite receiver. 2. Aim the remote control at the front of your satellite receiver. 3. Press and release the SATELLITE (SAT) button to switch to satellite pre-coded mode. 4.
USING THE REMOTE TO CONTROL Operating the precoded function DVD FUNCTIONS for your DVD player. This remote is designed to operate different types of DVD players. your DVD player. (refer to page 33 for pre-codes) You must first program the remote to match the remote system of 1. Turn ON your DVD player. 2. Aim the remote control at the front of your DVD player. 3. Press and release the DVD button to switch to DVD pre-coded mode. 4.
TO CONTROL ADDITIONAL Operating the precoded function for your Audio/Video USING THE REMOTE AUDIO/VIDEO EQUIPMENT component. This remote is designed to operate different types of Audio/Video component. system of your Audio/Video component. (refer to page 33 for pre-codes) You must first program the remote to match the remote 1. Turn ON your Audio/Video component you wish to control with the Remote. 2. Aim the remote control at the front of your Audio/Video component. 3.
VCR, CABLE, SATELLITE, DVD and AUDIO/VIDEO CODES (CLU-577TSI) VCR BRAND ............. CODE Adventura .................. Aiko ....................... Aiwa ...................... Akai ................. 01 09 01 02, 47, 48 American High ............... Asha ...................... 23 44 Audiovox ................... Beaumark .................. Bell & Howell ................ 24 44 32 Brandt ..................... 42 Broksonic ....... 33, 34, 41, 49, 50 Calix ...................... 24 Canon ..............
ULTRATEC OSD 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the THUMB STICK to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. HELP 0 4. Press HELP on the remote control when a menu is displayed, and text will appear giving a description of that menu. This part of the screen shows what selections are available. 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. AUTO CHANNEL SET 5.
ULTRATEC OSD 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. AUTO CHANNEL SET 5. CHANNEL MEMORY 6. CHANNEL LIST 7. CLOCK SET 8. ROTATION SET UP AUDIO 9. COMPONENT SET Choose English, French, or Spanish text. Optimum hook up for your system. Select Antenna or Cable TV. First time set up for channel buttons. Channel buttons, add or skip. Check channel name, scan, and child lock. Set before using timer features. Allows you to adjust picture rotation. Select type of component input. 1 CHANNEL ID. 2.
SET UP Select SETUP when setting your TV up for the first time. the function desired. 1. MENU 2. PLUG 3. 4. 5. 6. Use the THUMB STICK • or • on the remote to highlight LANGUAGE & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST 7. CLOCK SET 8. ROTATION 9. COMPONENT SET I TO QUIT I EXIT Use THUMB STICK • or • to select the sub-menu of your choice. You can also use the number buttons to directly access the submenu of your choice.
SET UP PLUG & PLAY I This guide willwill help to properly set up or Home Theater System. Simply system. answer three graphic questions andfunction a graphic be you displayed, showing youyour the TV optimum setup for your personalized WELCOME TO HITACHI PLAY ON SCREEN SET 1. MENU THUMB STICK LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. AUTO CHANNEL _. (FOR 8. ROTATION THREE SIMPLE THIS SYSTEM WILL TYPICAL CONNECTIONS DETAILED REFER 9.
SET UP I Select ANTENNA if you are using an indoor or outdoor antenna. SIGNAL SOURCE 1. MENU 2. PLUG 3. 4. 5. 6. Select CATV if you have cable TV. THUMB STICK LANGUAGE & PLAY SIGNAL SOURCE =)' AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST ® O O ANTENNA CATV 1 CATV 2 7. CLOCK SET 8. ROTATION 9. COMPONENT MENU 1. MENU 2. PLUG BAR TO QUIT I EXIT THUMB STICK LANGUAGE 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE & PLAY 3. SIGNAL SOURCE 4. AUTO CHANNEL SET 5. CHANNEL MEMORY 6.
SET UP I AUTO CHANNEL SET II This feature will automatically store activeUP TV(A) channels in CHANNEL MEMORY. unused channels when using CHANNEL or DOWN (V). 1. MENU This will allow you to skip THUMB STICK LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. AUTO CHANNEL SET I_ 5. CHANNEL MEMORY 6. CHANNEL 7. CLOCK PRESS SELECT TO ACTIVATE/DEACTIVATE 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL 4. AUTO LIST MENU SET BAR SET TO QUIT I EXIT | / THUMB STICK SOURCE CHANNEL 5. CHANNEL 6. CHANNEL 7.
SET UP I CHANNEL MEMORY II Use this function AUTO CHANNEL CHANNEL • or • after buttons. 1. MENU SET to add or erase additional THUMB STICK LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. 5. 6. 7. MENU 1. 2. 3. 4. 5. MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY 6. CHANNEL LIST 7. CLOCK SET 8. ROTATION 9. COMPONENT MENU ITO MENU CHANNEL AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET 8. ROTATION 9.
SET UP CHANNEL LIST I This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added I to CHANNEL MEMORY (SCAN), and which are protected by PARENTAL CONTROL (LOCK). THUMB STICK 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. 5. 6. 7. AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST _l, CLOCK SET 8. ROTATION 9. COMPONENT MENU CHANNEL A CH 1 2 3 4 v MENU LIST ID ESPN ABC BRVO CBS **** ....
SET UP CLOCK SET I The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT. 1. MENU 2. PLUG 3. 4. 5. 6. SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST 7. CLOCK SET 8. ROTATION 9. COMPONENT MENU ,*,TO SET THUMB STICK LANGUAGE & PLAY ITO _l. SET MENU BAR TO QUIT I EXIT TIME vATO SET TIME v CLOCK THUMB STICK SET ....
SET UP I This feature allows you to adjust Picture Rotation. ROTATION 1. 2. 3. 4. MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL 5. 6. 7. 8. PRESS • OR • KEY TO CORRECT PICTURE ROTATION PICTURE MENU ITO MENU ITO SET MENU BAR TO QUIT I EXIT "] / PRESS • OR • KEY TO CORRECT PICTURE ROTATION THUMB STICK ROTATION "00 + : RIGHT
SET UP I The COMPONENT SET function is very useful when setting up reception High Definition, Standard Definition and NTSC signals. COMPONENTSET THUMB STICK 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. 5. 6. 7. AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET 8. ROTATION 9.
CUSTOMIZE This selection CHANNELID. THUMB STICK contains advanced features which will make TV viewing easier and more enjoyable. I Use this feature give up to 20signal channels when ANTENNA signal source is selected and up to 60 channels a nameto when CATV sourcea name is selected. 1. CHANNEL 2. VIDEO ID. ID. 3. 4. 5. 6. FAMILY FAVORITES PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK 7. 8. 9. CLOSED CAPTION MENU BACKGROUND FIRST TIME TOUR ITO MENU MENU THUMB STICK ml_ BAR CHANNEL _, ID.
CUSTOMIZE VIDEO ID. I Use this feature to give a name to any of the three video inputs. 1. CHANNEL 2. 3. 4. 5. 6. THUMB STICK ID. VIDEO ID. _l, FAMILY FAVORITES PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK VIDEO _. THUMB STICK ID. ®VID 1 OVID2 OVID3 VIDEO LIST CUSTOM [] RESET 7. CLOSED CAPTION 8. MENU BACKGROUND 9.
CUSTOMIZE I FAMILY(MENU) FAVORITES This function allows youcan to be group yourinfavorite channels into six personalized categories that you can rename. Atotal of 36 channels stored the FAMILY FAVORITES function. 1. CHANNEL 2. VIDEO THUMB STICK ID. ID. 3. FAMILY FAVORITES 4. PARENTAL CONTROL 5. 4 EVENT PROGRAM FAMILY _' 6. AUTO LINK 7. CLOSED CAPTION 8. MENU BACKGROUND 9.
CUSTOMIZE FAMILY FAVORITES (OPERATION) I Use this function to display FAMILY FAVORITES selections as sub-pictures I desired favorite channel. or to tune the main picture to a THUMB STICK TO IRF TO QUIT MENU ITO SURF TO QUIT I EXI- THUMB STICK MENU ITO SURF Select a category using THUMB STICK • or I_. Press MENU and the category will be displayed as sub-pictures at the right edge of the screen. This is useful for previewing a category.
CUSTOMIZE I PARENTAL CONTROLI This block out the sound of theforselected channel or video input. It canfunction also bewill used to keep the picture TV fromand being viewed a scheduled amount of time that you set. I The code to enter PARENTAL CONTROL is a four digit secret code number. Use the number buttons to select secret code. The factory preset code is 0000. USE NUMBER PARENTAL 1. CHANNEL THUMB STICK ID. 2. VIDEO ID. 3. FAMILY 4, PARENTAL 5. 4 EVENT 6.
CUSTOMIZE I 4 EVENT PROG. I This function will automatically turn the TV on and off, one time only, every day, or once a week. 1. CHANNEL 2. VIDEO THUMB STICK ID. ID. 3. FAMILY CONTROL 5. 4 EVENT PROGRAM 6. AUTO LINK 7. CLOSED _' CAPTION 8. MENU BACKGROUND 9. FIRST TIME MENU <) FAVORITES 4.
CUSTOMIZE I AUTO LINK Use this function to automatically turn the TV on and tune to VIDEO: 1, 2 or 3 when it detects a VIDEO input. THUMB STICK 1. CHANNEL ID. 2. VIDEO ID. 3. FAMILY FAVORITES 4. 5. 6. 7. PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK _' CLOSED CAPTION 8. MENU 9. FIRST MENU I TO BACKGROUND TIME TOUR MENU BAR 1. CHANNEL 2. 3. 4. 5. _) V10 _AUTO 6. AUTO LINK 7. CLOSED CAPTION 8. MENU BACKGROUND V20V3 OREMOTE OOFF TO QUIT 9. FIRST I ID. VIDEO ID.
CUSTOMIZE CLOSED CAPTION I Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as _ or THUMB STICK 1. CHANNEL ID. 2. VIDEO ID. 3. 4. 5. 6. FAMILY FAVORITES PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK 7. CLOSED CAPTION 8. MENU BACKGROUND 9. FIRST TIME TOUR MENU ITO MENU CLOSED _' DISPLAY ® OFF MODE ® C.C.
CUSTOMIZE FIRST TIME TOUR I functions his function introduces you you to the TimeTV Tour showing This you basic as well as helping setFirst up your or Setup Home Feature, Theater System. featureTVwill be displayed every time your TV is turned on, unless you set FIRST TIME TOUR to OFF. MENU SYSTEM IN ENGLISH FRECH OR SPAN!Sh. HITACHI INTRODUCES FIRST TIME TOUR Q POWER -_ YOU TO THE SETUP FEATURE.
VIDEO Select VIDEO to adjust picture settings and improve picture quality. THUMB STICK 1. CONTRAST 2. BRIGHTNESS •_• •_• 3. COLOR 4. TINT •_• • [--B'--I 5. SHARPNESS •_• 6. RESET 7. ADVANCED SETTINGS [] MENU ITO MENU 100% 50% THUMB STICK 50% • 50% • • lOO% CONTRAST BAR TO QUIT I EXIT MENU ITO MENU BAR TO QUIT I EXIT Use the THUMB STICK • or • to highlight the function to be adjusted. Press the THUMB STICK • or • to adjust the function. Press EXIT to quit menu.
VIDEO ADVANCED SETTINGS I Your qualityHITACHI picture possible. color TV has the following functions which will adjust picture settings to produce the highest THUMB STICK OO 1. CONTRAST ' __" 2. BRIGHTNESS ,_'_11_50% 4, TINT __1_ 5, SHARPNESS __1_ 3. COLOR MENU PRESS SELECT TO ACTIVATE/DEACTIVATE ADVANCED [] ITO TO QUIT I EXIT / THUMB COLOR ADVANCED STICK _O MENU COLOR "_ _OCOOL ASPECT TO V.
AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality. THUMB STICK 1. BASS 2. TREBLE THUMB STICK ,_,72% ,__1,50% 3. BALANCE 4. RESET 5. ADVANCED <2> ITO MENU BAR __-1_90% ___50% 3. BALANCE _[__ 4. RESET 5. ADVANCED [] SETTINGS MENU 1. BASS 2. TREBLE TO QUIT I EXIT MENU _[__ [] SETTINGS ITO MENU BAR TO QUIT I EXIT Use THUMB STICK • or • to highlight the function to be adjusted. Press THUMB STICK • or • to adjust the function.
AUDIO I ADVANCED SETTINGS Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions. THUMB STICK 1. BASS ,_,72% 2. TREBLE 3. BALANCE "_'50% ___ 4. RESET 5.
THEATER Use this function to choose picture and audio settings for a true home THEATER experience. THEATER MODES I Use this function to choose from automatic picture settings to optimize your TV s performance. THUMB STICK 1. THEATER MODES 2. SURROUND m_ ® TV O MOVIES O MUSIC O SPORTS [] RESET MENU ITO MENU BAR TO QUIT I THUMB STICK -K) EXIT + 1. THEATER MODES 2. SURROUND MENU ITO MENU BAR _l.® O O O [] TV MOVIES MUSIC SPORTS RESET TO QUIT I THUMB STICK 1. THEATER 2.
THEATER I Surround I he following surround settings sports stadiums, movie theaters, will reproduce the live sound etc. with only two speakers. you would hear in concert halls, SRS bySRSCO)" Based on the principles of the human hearing system, SRS technology delivers and exciting and realistic 3D Sound experience from just two external speakers (or) the two internal speakers of your HITACHI Television.
1_ ASK CARE OF YOUR HITACHI COLOR TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your television away from extreme heat, humidity, and extremely dusty places. Remove the plug from the wall outlet if your television when you go on vacation.
RECEPTION PROBLEMS ¥ IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ¥ GHOSTS: _.. ,J Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
1_ ASK USEFUL INFO / / / / SYMPTOMS No Picture, no sound 000000 Sound OK, picture poor • 000 Picture OK, sound poor • 000 Picture blurred • 000 Lines or streaks in picture 000 Poor reception on some channels 000 O0 Picture rolls vertically No color • 000 Poor color • 000 HITACHI Color Television incorporates advanced power surge protection technology component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION 1. 2. 3.
USEFUL INFO Features: ¥ ¥ ¥ ¥ ¥ Superfine Picture Quality 700 Line Horizontal Resolution Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment.
1_ ASK USEFUL INFO HITACHI To locate an authorized HITACHI service in the continental facility U.S.A. and Canada, DIAL TOLL FREE 7 days a week, 24 hours a day (1-800-448-2244) Hitachi America, LTD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
NOTES 65
NOTES 66
NOTES 67
HITACHI QR48441
