Solid State Color TV OPERATING GUIDE IMPORTANT SAFEGUARDS 2-4 i '_ ° i ' °11 FIRST TIME USE JI THE REMOTE 5-23 CONTROL 24-34 i ,_ _! _up _._._ _ !1_..
IMPORTANT Follow al! warnings and instructions marked on this color television.
SAFETY TIPS IMPORTANT CAUTION: SAFEGUARDS - Read all of these instructions, • Save these instructions for later use. . Follow all warnings and instructions marked on the television. Our reputation has been built on the quality, performance, SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI COLOR TELEVISION and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units.
/k SAFETY TIPS PROTECTION 161 AND LOCATION OF YOUR TELEVISION tf an outside antenna is connecled 17 to the television, be sure the antenna system is grounder_ so -3s to provide some prelect on against voltage surges and burr LIp static charges Sector= 810 of the National Elecbca_ Code, NFPA No 701975, provides information with respect to proper grourdlrg of [he mast and supporl_ng structure, groundirg of the lead in wire to an an!enna discharge unt, s}ze of grounding conductors, iocation ,of anten
ACCESSORIES I IIIIIIII I Check that you have the following accessories before disposing of the packing material. 1. Remote Control Unit (See Part No. below) 2. Two "AA" size, 1.5V batteries (For Remote Control Unit). For information regarding how to obtain these accessories, please call TOLL FREE !-800_448_2244 for the nearest HITACH! Authorized parts Distributor in the United States. For Alaska and Hawaii, please contact your nearest HITACHI regional office. PARTS NAME PART NO.
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers. 2. Insert two new "AA" size batteries for the remote control, When replacing old batteries, push them towards the springs and lift them out. 3. Match the batteries to the (+) and (-) marks in the battery compartment. 4. Replace the cover. BOTTOM VIEW Push in and tift Up on tab to remove back cover.
HOW TO SET UP YOUR NEW HITACHI COLOR TV ..... ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance, However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sei! audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
FRONT PANEL CONTROLS FOR 32UX59B AND 36UX59B FRONT L ® Input/Exit Button ® ® Voume Button Menu J I I I IO°C'_'4 o I IJ ® Channe Buttons o 0©00 OButtoo I VIEW Power Button O-_ Dual Tuner PIP I I @ Remote Intrared Co[ltrol Sensor See pages 26 and 28 for MENU, CURSOR, and EXIT button operations.
FRONT 32CX39B PANEL CONTROLS 7 32FX49B 736CX39B AND 36FX49B FRONT VIEW L i I I0 ®_._1 • I I ]] 32FX49B and 36FX49B models 'I T L oj Dual Tuner PIP 32CX39B and 36CX39B models ® ® ® Ir_put/Ex_t Buttofl Volume B_11on Channel Buttons r-h 1 (_) Remote Control Ir_frared Ser_sor PIP F _s:°'r ® (_ BU_On L_Li_._ CURSOR _, See pages 26 andand 28 EXiT for MENU, CURSOR, button operations A detailed explanation of the circled numbers is on page 11.
FRONT PANEL JACKS AND CONNECTIONS (_) MENU Button This button allows you to enter the MENU, making it possible to set TV features to your preference with out using the remote. (_ INPUT/EXIT button Press this button to select the current antenna or VIDEO source. Your selection is shown in the top right corner of the screen, This button also serves as the EXIT button when in MENU mode. (_) VOLUME Level Press these buttons for your desired sound level. The volume level will be displayed on the TV screen.
FRONT PANEL .......
REAR PANEL JACKS (32UX59Bz 32FX49B 7 36UX59B VHF/UHF ANTENNA TERMINALS 36FX49B AND 36FX49B) and 32FX49B VHF/UHF ANTENNA TERMINALS Q 36UX59B T L_ Y-CB-CR PNPUTS AUDIO TO HI,FI OUTPUT TERMINAL A detailed explanation of the circled numbers is on page 15 13 S and 32UX59B
REAR PANEL JACKS -- !320X39B _= VHF/UHF ANTENNA TERMINAL L_ ...........
REAR (_ PANEL JACKS Antenna Input (36CX39B and 32CX39B models) The VHF/UHF terminal can be used for normal TV, cable TV (CATV). video game, etc, Antenna Inputs (36/32UX59B and 36/32FX49B models) The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture).
t [ L-_,-T_---_-I ............................. _00"OC s[eree Typical full feature setup. Fellow connections System Ampllfiet that pertain ta your personal entertainment 16 system.
REAR PANEL CONNECTIONS 136FX49B AND 32FX49B / Cab!e TV Box Optional see iJps on page 15 Optional see tips ol'_page 15 or) ! Laserdisc player, camcorder, etc VCR, Stereo Sys[em Amplifle Typical fulI feature setup.
REAR PANEL CONNECTIONS OptJonaJ _ee tips on page 15 1320X39,B or) L aserdisc p}ayer, o_mco_der, _tc VOR, is_r @ o d@] vCR Typical full feature setup. AND 360X39B Stereo System -_S - Follow cortnections that pertain to your personal entertainment 18 system.
EXTERNAL CONNECTING 1": IJ CONNECTIONS EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below, (REAR OF TV SET) AUDIO TO H!-FI TERMINAL _L -OR AUDIO TO HITO AUDIO INPUT TERMtNALL_( OF EXTERNAL AMPLIFIER EXTERNAL, SPEAKERS NOTE: AUDIO AMPLIFIER ) EXTERNAL SPEAKERS To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote contr
CONNECTING EXTERNAL VIDEO SOURCES Tile exact arrangement you use to connect the VCR, camcorder, laserdisc player to your TV set is dependent on the model and features of each component. Check the owner's manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your padicular assortment of components and features.
CONNECTING CONNECTING EXTERNAL VIDEO A STEREO VCR OR STEREO LASERDISC SOURCES xv, T __/_ PLAYER I. Connect the cable from the VIDEO OUT of the VCR of the laserdisc player to the INPUT (VIDEO) jack on the FV set below_ 2. Connect the cable from the AUDIO OUT R d the VCR or the laserdisc player to the INPUT(AUDIO/R) 3. Connect the cable from the AUDIO OUT L of the VCR or tile laserdisc player to the INPUT(AUDIO/L) 4. Press the INPUT button to view the program from the VCR or laserdisc player.
CONNECTING CONNECTING EXTERNAL A STEREO LASERDISC PLAYER OR DVD PLAYER WITH COMPONENT VIDEO SOURCES OUTPUT CAPABILITY. 1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown below. 2. Connect the cable from the C B OUT of the Laserdisc or the DVD player to the INPUT 2 (CB) jack, as shown below. 3. Connect the cable from the C R OUT of the Laserdisc or the DVD player to the INPUT 2 (CR) lack, as shown below. 4.
AUDIO SYSTEM SETUP Match the numbers below to the diagrams for speaker placement (See page 57 for SURROUND functions). (_) The television's (_) These speakers are connected to a separate audio amplifier. and refer to the table for the different surround sound requirements internal speakers Use the "Audio to H!-Fr' output on the television. © _\ ___ _=_L 3 WAYSURROUND FEATURE OFF MUSIC REQUIRED CONNECTION O C!) (_) OPTIONAL EFFECT CONNECTION _ Receive -- mono and stereo At stereo input, s
THE REMOTE CONTROL In addition to controlling all the functions on your HITACHi Color TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV), and satellite converters with one touch. Basic operation keys are grouped together n one area. To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The remote will now control your television.
HOW TO USE THE REMOTE TO CONTROL YOUR TV A detailed explanation of the circled numbers follows on pages 26 to 28, r ]_ TV POWER Button Press this button to turn the TV set On or__ Off. @ HELP Button Press this button to display or canceI the help messages of the On-Screen Display. .@ ® ('8) PICTURE - IN - PICTURE See separate section on pages 29, for a detailed description. (_ _ picture and sub-picture tuning, This function is not avaibIe on 36/32CX39B models.
HOW TO USE THE REMOTE TO CONTROL YOUR TV (_)TV POWER Button Press this button to turn the TV set on or off. If a Special Event Reminder is set, it will be displayed when the TV is first turned on. (See page 58) SLEEP Button Press this button to display the SLEEP TIMER in the lower left corner of the screen. add 15 minutes to the timer, up to a maximum of three hours.
HOW TO USE THE REMOTE TO CONTROL (_) INPUT Button 36/32UX59B and 36/32FX49B YOUR TV models: The iNPUT button wilt select between both antenna signals and the video inputs; if the Sub-Picture is on, and the main picture is chosen with the PiP CH, the main picture will alternate between the video inputs and both antenna sources by every press of the INPUT button, if the Sub-Picture is chosen wlth the PiP CH, the Sub-Picture will alternate between the video inputs and antenna A source by every press of the
HOW TO USE THE REMOTE TO CONTROL (_ YOUR TV VOLUME, MU_rE buttons Press the VOLUME up ( • ) or down ( • ) button until you obtain the desired sound level To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button. Press the MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one more time, or press [he VOLUME up (•) button.
PICTURE-IN-PICTURE (PIP) 36/32UX59B and 36/32FX49B models: ]he Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program while viewing other programs from the antenna source or any of the video inputs. Your HITACHI Color TV incorporates Dual Tuner technology designed for improved viewing enjoyment.
PICTURE-IN-PICTURE 36CX39B and 32CX39B models: Press the PtP button and a Sub-Picture Sub-Picture from the screen. appears (PIP) in one corner of the screen. Press the button a second time to remove the Main Picture PIP f (_) PiP Sub-Picture I )4[ SWAP Button If yeu wish to switch what is being shown on the main picture to the Sub-Picture, press the SWAP button.
PICTURE-IN-PICTURE (_ (PIP) FREEZE (FRZ) Button If you wish to freeze the Sub-Picture, press the FRZ button. TMs is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FRZ button again. FRZ FRZ _ QUICK FREEZE (FRZ) Button Press this button without a Sub-Picture viewing_ to freeze the picture you are currently viewing.
USING THE REMOTE Operating the preceded function TO CONTROL VCR FUNCTIONS for your VCR. This remote is designed to operate different types of VCRs. VCR. (Refer to page 34). You must first program the remote to match the remote system of your !. 2. 3. Turn ON yourVCR. Aim the remote control at the front of your VCR. Press the VCR button to switch to the VCR pre-coded mode. 4. Hotd down the VCR button on the remote, enter the two digit preset code that matches your VCR as shown in page 34.
USING THE REMOTE TO CONTROL CABLE BOX/SATELLITE FUNCTIONS iii Operating the precoded function for your cable/satellite box. This remote is designed to operate different types of cable boxes and satellite systems. You must first program the remote to match the remote system in your cable/satetfite box. (Refer to page 34). 1. 2_ 3• 4. 5. Turn ON your cable/satellite box.
CABLE/SATELLITE CABLE BRAND BODE ABC ............. 00, 02, 04, 05, .............. 07, 08, 11, 44 Antronix .............. 25, 43 Archer ............. 23, 25, 43 Belcor ................... 42 Cabie Star .............. 42 CabFetenna ................ 43 Cabieview ................ 43 Century ................. 23 Citizen .................. 23, 29 Colour Voice ............. 15,17 Comtronics ................. 18 Contec .................. 12 Dae Ryung ............... 04 Eastern ................... 01 Everquest .....
ULTRATEC OSD I I 1. Press MENU on the remote control to display the different features on your HITACHI Color TV. 2. Press the CURSOR buttons to hi_lh%ht a different feature, 3. Press EXIT on the remote control to quickly exit from a menu. 4. Press HELP on the remote control when a menu is displayed, and text wilI appear giving a description of that menu. CURSOR G Q RECALL HBLP This part of the screen shows selections are available. what 1 The icon shows the available moves on the menu.
ULTRATEC OSD MENU LANGUAGE PLUG & PLAY Choose English, French, or Spanish text. Optimum hook up for your system Select antenna or cable TV. SIGNAL SOURCE AUTO CHANNEL SET First time set up for channel buttons. CHANNEL MEMORY Channel buttons, add, skip. CHANNEL LIST Check channel name, scan and PARENTAL CONTROL Set before using timer features. CLOCK SET ...................... SET UP CH_I_ 'TL.
SET UP F Select INITIAL SETUP when setting your TV up for the first time. highlight the function desired. Use the CURSOR TO QUiT ]b see an auto-demonstration the 1_/set for approximately I MENU LANGUAGE j This feature wilt allow you to select any one of three different DEO _J AUDIOH mB_9 I TO MENU BAR _ languages for all omscreen displays.
....... SET UP I PLUG & PLAY I This graphic guide you to properly set up or Home Theater System. Simply system.
SET UP I I SIGNAL SOURCE I Select ANTENNA if you are using an indoor or outdoor antenna MENU LANGUAGE PLUG & PLAY CURSOR SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL UST CLOCK SET MENU MENU LANGUAGE HUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LiST CLOCK SET MENU I [OMENU _ BAR _' _) ANTENNA O CATV 1 O CATV 2 TO Qurr _ AN [ENNA o CATV 1 O CATV 2 TO QUITt CURSOR I TO MENU BAR Select CATV if you have cable TV, EXiT MENU [ANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO
i iiiiii SET UP ii iiii IIIIIIIII IA°TO C.ANNEL SET ¸] This feature wilt automatically store active TV channels in CHANNEL unused channels when using CHANNEL UP (A) or DOWN (Y).
SET UP Use this function after AUTO CHANNEL CHANNEL MEMORY I SET to add or erase additional channels to the remote control CHANNEL • or • buttons. h ..........................................
SET UP l CHANNEL LIST J This function allows you to review which channels are labeled in CHANNEL ID (ID)., which have been added to CHANNEL MEMORY (SCAN), and which are protected by PARENTAL CONTROL LOCK (LOCK). MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET MENu CHANNEL • CH 1 MENU LIST ID **** **_* .... 4 ***9 ...... S **** .... 7 **** .....
SET UP I CLOCK SET The time must be set before you can use the CALENDAR, REM NDER, or TVTIME OUT. MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET MENU BAR PROGRAM, SPECIAL CURSOR m_, I TO MENU BAR CURSOR MENUlTO MENU 4 EVENT TO QUbT I EX}T CLOCK SET 10:30AM JAN MENU TO QUIT I EXIT 01 I999 ITO MENU BAR Use CURSOR ,& or • to set the time, date, and year. Press CURSOR 4 or 1_ to change position.
CUSTOM I 1 CHANNEL This selection ID contains advanced features which will make TV viewing Use this feature to give up to 20 channels a name when ANTENNA channels a name when CATVl signal source is selected. easier and more enioyable. signal source is selected and up to 60 CURSOR CHANNEL ID VIDEO IP.
CUSTOM I Use this feature to give a narne to any of the video inputs. VIDEO ID. P CURSOR CHANNEL. ID WDEO IO.
CUSTOM IIIII FAMILY FAVORITES (MENU} I I This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 24 channels can be stored in the FAMILY FAVORITES function. J CURSOR CHANNEL ID. VIDEO )D.
CUSTOM III Use this function to tune the main picture to a desired favorite channel, FAMILY FAVORITES (OPERATION) CURSOR CURSOR CURSOR Press the CURSOR button. Select a category using CURSOR _I or lb buttons, Use CURSOR • or V buttons to highlight a favorite channel and the TV will automatically Press EXIT to remove FAMILY FAVORITES OSD from the screen. tune to that channel. When PiP is displayed, the cursor will not activate the FAMILY FAVORITE menu.
l l, , CUSTOM PARENTAL CONTROL This function block out view the picture and soundamount of the selected channel or video inpuL It can also be used to keep the TVwill from being for a scheduled of time that you set. The code to enter PARENTAL CONTROL is a four digit code number. Use the number buttons to select secret code. CURSOR CHANNEL ID. VIDEO ID. FAMI[Y FAVORITES PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK CLOSED CAPTION MENU BACKGROUND The factory preset code is 0000.
CUSTOM J 4 EVENT PROG. This function will automatically CHANNEL ID VIDEO ID, FAMILY FAVORITES PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK CLOSED CAPTION MENU BACKGROUND turn the TV on and off, one time only, every day or once a week.
CUSTOM I J iiiii AUTO LINK t iiiii Use this function to automatica!iy MENU j TO DIENU BAR turn the TV on and tune to VIDEO source when it detects a VIDEO input. CURSOR CHANNEL ID VIDEO ID, FAMIt Y FAVORITES PAREN]AL CONTROL 4 EVENT PROGRAM AUTO LINK CLOSED CAPTION MENU BACKGROUND AUTO LINK ,_v! V2 V3 [0 iii QUIT_ MENU AUTO o 0 0 J TOMENU REMOTE o O o BAR OFF ,_ :1_ TO QUITI EXIT Use CURSOR • or • to select Input. Use CURSOR 1_ to changeAUTO LINK setting.
CUSTOM CLOSED CAPTION II Closed captions are tile dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen: Your local TV program guide denotes these programs as _ or E_ - CHANNEL ID VIDEO ID, FAMILY FAVORI f ES PARENTAL CONTROL 4 EVENT PROGRAM AUTO LINK CLOSED CAPTION MENU BACKGROUND MENU CURSOR CLOSED _ i_ t TO MENU BAR TO QUI] I EXIt MENu DISPLAY: ON/OFF wilt turn the _ MODE: C.C.
VIDEO Select VIDEO to adjust picture settings exactly the way you want it and improve picture quaNty. CURSOR CONTRAST BRIGHTNESS COLOR TINT SHARPNESS RESET ADVANCED SEITINGS MENU I FOMENUBAR "q_ 1117P" 76% _1_L_ ]iJ - 50% •_i_ 50% • _i]i] I_ 41_1.[_1_50% FQQUIT CONTRAST BRIGHTNESS COLOR TINT SHARPNESS RESET ADVANCED SET11NGS CURSOR I EXIT MENU ITOMENU I • • • • BAR _ _11 _ l ::::" _. I_ 98% i.
VIDEO ADVANCED SETTINGS} Select VIDEO to adjust picture settings exactly the way you want it and finprove picture qaality. CURSOR CONTRAST BRIGHTNESS COLOR TiNT SHARPNESS RESET ADVANCED SETTINGS MENU [ TO MENU _1_1_ .
AUDIO _AUD_O_ m Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality. CURSOR BASS TREBLE BALANCE RESET ADVANCED SETTrNGB VOLUME CORRECTION _TO MENU BAR 41_1 41_" 41_1 b 72% 50% b CURSOR BASS TREB[E BAI ANCE RESET ADVANCED SETTINGS VOLUME CORRECTrON MENU I _0MENU BAn TO QUI;_ _1111111n_ _ _111_ _ _::_ t_ 90% I_ 50% I_ ro auiTI Ex_ Use CURSOR & or • to highlight the function to be adjusted. Press CURSOR 41 or 1_ to adjust the function.
AUDIO l IAUDID _] ADVANCED SETTINGS 1 Use ADVANCED SETTINGS to improve the sound performance of your TV depending on listening conditions. CURSOR BASS TREBLE BALANCE RESET ADVANCED SEI-FINGS VOLUME COR_ECTION -MENU _1_ 41_1_ _ _Jl,- I TO MENU BAR 72% 50% TO QUt] CURSOR I EXIT CURSOR ADVANCED SETTINGS _STEREO oMONO o SECOND AUDIO PROGRAM ADVANCED SETTINGS _STEREO OMONO OSECGND AUDIO PROG_\M _INTERNALSREAKERS D AUTO NOISE CANCEL D LOUDNESS D DYNAMtC BASS _-MENU I TO MENU BAR _INTERNAL S
AUDIO i i VOLUME CORRECTION IIIII I Use this function to reduce the volume tevel of up to four charmels ] channels I that sound loud compared IIIIIIII to other CURSOR BASS TREBLE BALANCE RESEf CURSOR CH SETDNGS VOLUME ADVANCED CORRECTION MENU MENUI to MEN{;_AR CH =_ I TO MENU BAR 3 BASS TREBLE BALANCE RESET ADVANCED SETTINGS VOLUME CORRECTION _ LEVEr 100% 100% 100% 100% TO QUIT I EXI[ CURSOR 3 BASS TREBLE BALANCE RESET ADVANCED' SET[INGS VOLUME CORRECTION LEVEL TOC*UI_l EXff-- MENU
THEATER Use this function to choose Sound settings for a true THEATER experience. SURROUND Surround sound allows viewer with to enjoy provides a feeling of "presence" fromincrease stereo broadcasts and VCR tapestherecorded stereosound sound.which Also al mono input, simulating a stereo will the sound giving the listener simulated surround sound.
INFO This function allows your TV to assist you with your busy day-to-day schedule. LIN O 1 I SPECIAL EVENT REMINDER CURSOR iJ These Use thisevents function set up to six special events into memory.
INFO I CALENDAR Use thisprogrammed function to check the day,EVENT month, REMINDER and year. Dates in SPECIAL be displayed. will appear blinking and special event message will CALENDAR SPECIAL EVENTREMINDER CURSOR CALENDAR _ i MENU t TO MENU BAR MENU TO QUI1 I EXIT S M 3 10 !7 24 31 4 11 18 25 I TO MENU BAR MAY 1999 T W T 5 12 19 26 6 13 20 27 7 14 21 28 F 1 8 15 22 29 S 2 9 16 23 30 TO QUIT I EXI1 Press CURSOR • or • to change the month.
CARE OF YOUR HITACHI COLOR TV AND YOUR REMOTE CONTROL DO Make sure the TV set is turned OFF when cleaning the screen. Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened the screen is extremely dirty. in warm water and dry with a soft cloth. A mild soap may be used if Place your television away from extreme heat, humidity, and extremely dusty places. Remove the plug from the wail outlet if your television when you go on vacation.
RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drifL Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. - GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path end the other is reflected from tall buildings, hitls or some other objects. Changing the direction or position of the antenna may improve reception.
USEFULINFO / /J /J SYMPTOMS / / / I _,,.4 No picture, no sound • I • Sound OK, picture poor • Picture OK, sound poor • Picture blurred • Lines or streaks in picture • • • • • • • • • Poor reception on some channels Picture rolls vertically No color • • Poor color HITACHI Color Television incorporates advanced power surge protection technology component or circuit damage due to external or internal voltage power surges.
USEFULINFO Features: Dual Antenna Inputs (36/32UX59B and 36/32FX49B models) Superfine Picture Quality 700 Line Horizontal Resolution Remote Transmitter (Controls many VCR, cable box, and satellite brands) P-in-P Functions ULTRATEC BIT-MAP OSD Furl set of input jacks, including S-Video Closed Caption Decoder Comb Filter, Wide-Band Video-Amp, Color Temperature Control and AUTO COLOR function MTS (Multi-Channel Television Sound) Stereo Broadcast Reception 3D Surround Sound (3 way) VMWelocity Modulation (36UX59
USEFULINFO HITACHI To locate an authorized HITACHI service in the continental and Canada, facility U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day NJL NJ (1-800-448-2244) Hitachi America, LTD. Home Electronics Division IIIIIII IIII III ttitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.