Color LCD Monitor USER MANUAL Model Name 32LD8800TA 37LD8800TA This is the image of the model 32LD8800TA. Desktop stand is optional for 37LD8800TA. READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE For future reference, record the serial number of your monitor. SERIAL NO. This serial number is located on the rear of the monitor.
QR65422 Printed in Japan
ENGLISH USER MANUAL Thank you for purchasing the HITACHI LCD Monitor. Please read this user manual carefully before operating this product. To ensure proper operation, please read and follow ALL the instructions, especially the "IMPORTANT SAFETY INSTRUCTIONS" and "SAFETY PRECAUTIONS". Please keep this user manual for future reference. LD8800TA-8th-P1-P24.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......... 1 INTRODUCTION ........................................... 2 About This Manual ................................................ 2 Trademark Credits ................................................. 2 About Software ...................................................... 2 SAFETY PRECAUTIONS ............................... 3 About the Symbols ................................................ 3 Cleaning and Maintenance....................................
INTRODUCTION ENGLISH Thank you for purchasing the HITACHI LCD Monitor. We hope that you will enjoy the great performance with this product. This LCD monitor has been designed to meet the International standards. However, it could cause personal injuries and property damage if improperly handled. In order to prevent potential danger and obtain maximum benefit from your set, please observe the following instructions when installing, operating, and cleaning the product.
SAFETY PRECAUTIONS For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries and/or damage to your property or this product. About the Symbols The following are the symbols used in this manual and affixed on the unit itself. Please fully understand the meanings of the symbols before reading the instructions in this section. WARNING Never ignore the instruction.
SAFETY PRECAUTIONS (continued) ENGLISH WARNING There is a risk of fire, electric shock, or serious injury. ■ Do not place any objects on top of the unit. Objects such as Liquid containers (vase, fish tank, flowerpot, cosmetics or liquid medicine). If water or any liquid spill onto the unit, it may cause short-circuit and result in fire or electrical shock. In case that it happens, turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
SAFETY PRECAUTIONS (continued) CAUTION ■ Do not place the unit at the dusty place. It could cause malfunction. ■ Do not cover or block any ventilation holes on the product. The monitor would overheat, and it could cause fire or damage the product which may shorten its service life. Install the product in accordance with the instructions in this manual. Do not place the unit with ventilation side down. Do not install the unit on the carpet or bedclothes. Do not cover the monitor with table cloth etc.
SAFETY PRECAUTIONS (continued) ENGLISH PRECAUTIONS ■ Do not install the unit in high temperature. It could damage the cabinet or parts of the product. Do not install near any heat sources such as radiator, heat registers, stoves, or other apparatus that produce heat. Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction. ■ Viewing Advice The lighting of the environment in which the product is used should be appropriate.
ABOUT LCD PANEL Common phenomena of LCD Panel The following are the common phenomena when operating LCD Panel due to its structural reason. Please note that they are not malfunctions. Defective Spots on Panel The LCD panel is manufactured with high-precision technology. However, there might be some spots that are not emitted, brighter than the others, or in different colors, etc. Surface on Panel The LCD panel displays images by blinking the fluorescent lamps internally.
FEATURES ENGLISH Enjoy not only beautiful and high quality pictures on the display, but also various kinds of useful and convenient functions in your daily life! Large-screen and high-definition LCD panel. Improved Digital signal processor. High quality sound with deeper, richer and dynamic bass tones. Accept more digital input devices with 2 HDMI terminals. Great diversity of connecting terminals to cover wide range of audio-visual equipments. Enjoy the image from PC with large, high-definition LCD screen.
COMPONENT NAMES Main Unit Front Panel q w e r q w e r t y u Cabinet Panel Indicating Lamp Remote Control Receiver Speaker Main Power Switch (on the bottom surface) Desktop Stand (optional for 37LD8800TA) q w e r t Handgrips Side Input Terminal Board (External Device Connection) Power Cord Socket Control Panel (see below for details) t u y Rear Panel 32LD8800TA 37LD8800TA t q t q r w w e e q Please refer to 13 ~ 17 for the detailed information for the connections.
Remote Control q k w e r l t y u i o 1( 2) 2! a s 2@ d f g h j 2# 2$ q Sub Power w Function Select (TV/DVD/SAT) Press this button to select function mode indicating LED lamp. Normally, select “TV”. e Input Select/DVD Control/Photo Input Control Press this button to change input mode. In addition, you can use these buttons while operating the selected brand of DVD player or Photo Input function.
PREPARATION Remote Control Batteries Installation This remote control operates on 2 “AA” batteries. 1. Open the battery compartment cover Slide open the battery compartment cover on the backside of the remote control in the direction of an arrow. 2. Install the batteries Install 2 “AA” batteries (included) making sure the polarities match the indication inside the compartment. 3. Close the battery compartment cover.
PREPARATION (continued) Read SAFETY PRECAUTIONS ( 3 to 6 ENGLISH Safety Precaution on Main Unit Installation ) carefully besides this page. *When installing the monitor, use the Desktop Stand (SD8G4237/ optional for 37LD8800TA). Please refer to the user manual of the stand. The Desktop Stand has been used for the illustration in this manual. When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance and maintain the safety.
CONNECTION Terminal Positions PH35826 Rear SD MEMORY CARD h g PUSH-EJECT f P P INPUT(RGB) ertyu PC ANALOG RGB a INPUT(HDMI) INPUT INPUT INPUT INPUT (AV1) (AV2) (AV3) (AV4) OUTPUT Y/VIDEO AUDIO WOW, SRS and INPUT(AV5) AUDIO ANT symbol are trademarks of SRS Labs, Inc. Y/VIDEO Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
CONNECTION (continued) ENGLISH Connecting Procedure (continued) 3. Connecting to External Equipment Terminals on Rear AV1 and AV2 can be connected to the equipment with either Component or Composite output. Depending on whether the Y/VIDEO input of your selected equipment is Y signal or Video signal, it automatically regards as Component or Composite. When using as Composite, do not insert the jacks into PB or PR.
CONNECTION (continued) Connecting Procedure (continued) Monitor Out can be used to display same image as main unit on another monitor. When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from composite(AV1~5), or S-Video(AV3,5), or RF signal can be displayed to the external monitor. [Example] VIDEO OUT IN VCR AUDIO DVD player L R Sub Woofer terminal can bring the deep bass sound from the external speaker.
CONNECTION (continued) ENGLISH Connecting Procedure (continued) Terminals on Side Since the following terminals are located on the side, it is very convenient to use the extra device on a temporary basis after done the connections on the rear panel. AV5 can be connected to the equipment with an S-Video output and composite output.
CONNECTION (continued) Connecting Procedure (continued) 4. Connecting the plug into the wall socket Connect the Power Cord after completing all other connections. (The type of plug is different from this drawing for some countries.) CAUTION Use only the Power Cord provided. Do not use a power supply voltage other than that indicated(AC100-240V, 50/60Hz). It may cause fire or electric shock. For the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection.
BASIC OPERATION ENGLISH Power On/Off Now, turn On the main power of the unit. Make sure that the Power Cord has plugged into the wall socket. To turn On the power of the monitor: 1. Press the Main Power switch on the monitor. The Indicating Lamp will illuminates in Red (Standby mode). Main Power switch (on the bottom surface) 2. Press Sub Power button either on the control panel or on the remote control. The color of the Indicating Lamp turns into Green, and the image will display on the screen.
BASIC OPERATION (continued) First Time Setup When you turn ON the TV for the first time, your TV automatically leads to the settings of “Language” and “Auto Tuning.” Language ޓޓޓޓޓEnglish ޓޓޓޓޓޓਛᢥ ❥ޓޓޓޓޓ㜚ਛᢥ ޓޓޓޓޓРуссkий ޓޓޓޓޓ ޓޓޓޓޓᣣᧄ⺆ 1. The first screen appeared will ask you to choose the language of your TV’s display. 2. Select the language you preferred from the list and press OK button. Select Return Exit 3.
BASIC OPERATION (continued) ENGLISH Input Switching to TV/AV1~5, HDMI, and RGB Input Select buttons By pressing Input Select button, you can switch the input. To watch actual broadcast, press Input Select button on the control panel, the numeric buttons or Channel Up / Down button on the remote control. To display the image outputting from the external equipments connected to each terminal (AV1~5, HDMI 1, 2, and RGB), select corresponding mode. 1. Press Input Select buttons on the remote control.
MENU OPERATION How to use the On-Screen Display (OSD) system With the On-Screen Display system, you can access the various kinds of the features and functions in this product. Picture Audio Timer Function Setup Language Select OK Set Basic Operation MENU 1. Press button on the remote control or Menu button on the control panel of the unit. The Main Menu is displayed on the screen as shown on the right. 2. To select the item, press ▲ or ▼ buttons. The selected item will be highlighted in Green.
MENU OPERATION (continued) ENGLISH Setup Menu (TV mode) With this menu, you can access various kinds of features relating to TV channel settings. Setup Auto Tuning Manual Tuning Fine Tuning Sort Teletext Language Auto Off Select OK Set Selected Items Setup hint Position Mode Auto Tuning Off Return Direct Select the way to display the channels on the screen. The position numbers are displayed on the screen.
MENU OPERATION (continued) Setup Menu (TV mode) (continued) Selected Items Setup hint Auto PAL Color System SECAM Select color system from 5 different modes. NTSC4.43 NTSC3.58 Off Manual Tuning Skip On NR Off On The noise on the screen or interference could be reduced, especially at the area of weak electric field. Off The noise on the screen or interference could be reduced in case that the receiving airwaves are too strong. The selection on this item is applied to all the channels. Antenna Att.
MENU OPERATION (continued) ENGLISH Setup Menu (AV mode) With this menu, you can select or adjust the condition of the input signals from each terminal. Setup System Color System Video Input Select Set Selected Items System 1 Return Setup hint Do not change the original setting. (System1: Europe/Asia, System2:North America) Composite and S-video input only. System 1 System System 2 Auto PAL System 1 SECAM NTSC4.43 Color system AV1~AV5 NTSC3.
MENU OPERATION (continued) Setup Menu (RGB mode) With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals. By pressing ▼button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.
MENU OPERATION (continued) Selected Items Setup hint 0.7V Input Level 1.0V Off Frequency Display On Off WVGA Type On Off 1280x768 1366x768 Off On PC Movie WXGA Mode Vertical Filter Frequency Mode ENGLISH Setup Menu (RGB mode) (continued) Normally, select [0.7V]. Select [1.0V] only when the whole display becomes too white. Select whether indicating the PC signal frequency information on Input Signal Screen Display or not. It allows you to switch display size to [Full] and [Real].
MENU OPERATION (continued) Function Menu This menu provides various ways to protect your panel, reduce power consumption, and set up utilizing the useful functions, such as Freeze Mode and Photo Input.
MENU OPERATION (continued) Selected Items Background Setup hint 1 2 Off Slide Effect 1 2 5Sec. Slide Interval 10Sec. 30Sec. Slide Music Slide Mode Reset ENGLISH Function Menu (continued) Off 1 2 1 2 This is available only for Photo Input function. Switch the pattern of background. See details on 49 . This is available only for Photo Input function. You can select the method of switching slides during slide show. See details on 47 . This is available only for Photo Input function.
MENU OPERATION (continued) Picture Menu (TV/AV mode) In this menu, you can make specific adjustments for the picture based on your preference. By pressing ▼button at the bottom of each menu page, the next Picture menu page will appear on the screen.
MENU OPERATION (continued) Selected Items Setup hint Dynamic Contrast Mode* Normal Auto Back Light ENGLISH Picture Menu (TV/AV mode) (continued) -20~+20 It allows you to choose from 3 modes. Dynamic: Sharpen the gradation to improve the contrast feeling. Normal: Reproduce as faithful gradation as possible. Auto: Adjust to natural brightness without blurred white by detecting the bright parts on images. Adjust the brightness of the Back Light for the maximum visibility.
MENU OPERATION (continued) Picture Menu (TV/AV mode) (continued) Selected Items Setup hint Amplitude Red Green Color Temp. Adjust** On Blue Cut off Red Green Blue On: When you want to set specific adjustments in each of the 4 Color Temperature modes. You can adjust on the amplitude and cut off. The settings reflect on the Color Temperature. Amplitude: subdue the following colors on the brighter parts. Cut off : subdue the following colors on the darker parts. Off: Remains as default setting.
MENU OPERATION (continued) ENGLISH Picture Menu (RGB mode) In this menu, you can make specific adjustments for the RGB picture based on your preference. Picture Contrast Brightness Color Tint Picture Enhancement Color Temperature Color Temp. Adjust Back Light Reset Select OK Set Selected Items : +31 : –31 : 0 : +31 : Off : Normal : +20 Reset Return Setup hint -31~+31 (+32~+40) This adjusts the contrast to meet the lighting environment by using ◄►.
MENU OPERATION (continued) Picture menu (RGB mode) (continued) Selected Items Setup hint Amplitude Red Green Blue Color Temp. Adjust.** On Cut off Red Green Blue On: When you want to set specific adjustments in each of the 4 Color Temperature modes. You can adjust on the amplitude and cut off. The settings reflect on the Color Temperature. Amplitude: subdue the following colors on the brighter parts. Cut off : subdue the following colors on the darker parts. Off: Remains as default setting.
MENU OPERATION (continued) ENGLISH Audio Menu With this menu, you can adjust and customize the audio condition as you like. You can move on to the next menu screen by pressing ▼button at the bottom.
MENU OPERATION (continued) Audio Menu (continued) Selected Items Headphone Volume Setup hint 0~63 A/B Headphone Select B It allows you to adjust the volume of the headphone. The sound from the speaker will automatically set to MUTE when the headphone is connected to the terminal. Select the either side of the display that you want to hear the sound with headphone during 2-picture mode.
FUNCTION ENGLISH Power Swivel With the Desktop stand (included for 32LD8800TA, optional for 37LD8800TA), you can adjust the angle of the SWIVEL monitor side to side by pressing button on the remote control. SWIVEL 1. Press button on the remote control. The Swivel Display (as shown in the figure on the right) will appear on the screen. 2. Adjust the angle of the monitor with ◄ ►keys while Swivel Display is on the screen. The monitor will be able to move ±30 degrees to each side.
FUNCTION (continued) About Teletext What is “Teletext” Teletext is the written information services provided by each TV channel. Most TV channels provide information via Teletext such as: 11 : 37 : 56 Page Number TV program schedule Weather forecasts Sports results Newsflash Link pages Red Green Yellow Blue How to operate the Teletext You can display the Teletext simply by pressing the remote control buttons. NOTE Select Teletext language from Setup Menu shown on 23 .
FUNCTION (continued) ENGLISH Size Switching Each time button of the remote control is pressed, the screen display size is switched in sequence, and the status will be displayed at the bottom of the screen. TV/AV signal input ZOOM button TV/AV1/AV2/AV3/AV4/AV5/HDMI1/HDMI2 4:3 Panoramic Full Zoom Cinema You can display the image at optimum condition by selecting display size depending on the current output image as shown below. Current Output Image Display Size To display suitable screen as follows.
FUNCTION (continued) Size Switching (continued) TV/AV signal input CAUTION Using a wide-screen monitor This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image would appear different form the original. Take this into consideration when making screen mode choices.
FUNCTION (continued) ENGLISH Multi Picture Mode With this feature, you can watch different channels simultaneously on one screen in several ways. As for the available signals, please refer to "Recommended Signal List" on 60 . This function is NOT available in HDMI input. To activate Multi Picture mode in either TV, AV, and RGB mode, press on the remote control. 2-picture mode You can watch two different pictures side by side. This mode is available in both TV mode and AV mode (AV1~5 Input).
FUNCTION (continued) Multi Picture Mode (continued) 2-picture mode (continued) 4. To switch to 4-picture mode, press 2-4-12 once. The 4-picture mode is displayed on the screen. NOTE Each time 2-4-12 AV1 is pressed, the picture mode will be switched by following order. 2-Picture 2-Picture (1080i)* 4-Picture AV2 12-Picture (TV mode only) * When receiving 1080i format of component signal, there is a mode (2-Picture(1080i)) which sub-screen is displayed inside of the large screen (Main-screen).
FUNCTION (continued) ENGLISH Multi Picture Mode (continued) 4-picture mode (continued) NOTE You cannot display the picture with Component signal on Side B screens. 4. To EXIT from Multi Picture mode, press button. to activate the Multi Picture mode, it will start from 4-picture mode. Next time you press 5. To switch to 12-picture mode, press button. The 12-picture mode is displayed on the screen. 2-4-12 12-picture mode You can check 12 different live broadcast channels on one screen.
FUNCTION (continued) Multi Picture Mode (continued) Activate the Multi Picture Mode in RGB Mode When you activate the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Subscreen is displayed inside of the large screen (Main-screen). To activate Multi Picture mode, press on the remote control. The speaker icon indicates the following. The audio sounds can be heard on the side with the speaker icon. When the speaker icon is on the Sub-screen Change channels.
FUNCTION (continued) ENGLISH Picture Freezing This is the useful function utilizing the characteristics of freezing picture effectively. By pressing button, you can change to freeze mode easily FREEZE button anytime you like. Press it again to return to normal picture. 2-4-12 There are two types of freeze mode as usage. These are possible to select at the “Freeze Mode” from Function Menu.( 27 ) [Split] Split: It displays 2 pictures from the same source.
FUNCTION (continued) Photo Input Function With this Photo Input function, you can enjoy watching Photos from such devices as Digital Still Camera and SD card on monitor along with useful features such as Slide Show with Background Music and Movie picture. Operating the Photo Input 1. Before operating this function, make sure to turn the power OFF /Standby. 2. Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as follows.
Do not allow children to play around the slot. FUNCTION (continued) ENGLISH Photo Input Function (continued) Displaying Still Picture in Photo Mode Thumbnail-Size Image (Index) to Full-Size Image 1 2 3 4 17 18 19 20 17 18 19 20 5 6 7 8 21 22 23 24 21 22 23 24 9 10 11 12 25 26 27 28 25 26 27 28 13 14 15 16 29 30 31 32 29 30 31 P P st nd Photo Index (1 Page). 32 nd Photo Index (2 Page) Move to next page. Photo Index (2 Page) Select the file. OK No.
FUNCTION (continued) Photo Input Function (continued) Displaying Still Picture in Photo Mode (continued) Slide Show Function SLIDE SHOW 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 OK No. 23 28/05/03 1600x1200 Slide Show begins.* Photo Index (2nd Page) Select the file. OK Start Slide Show is paused. *You can select where to start Slide Show. See “Slide Mode” in the table 1.
FUNCTION (continued) ENGLISH Photo Input Function (continued) Displaying Movie Picture in Movie Mode Thumbnail-Size Image (Index) to Full-Size Image: 1 2 3 4 1 2 3 4 5 6 7 8 5 6 7 8 9 10 11 12 9 10 11 12 13 14 15 16 13 14 15 16 st 2 2 st Photo Index (1 Page). 18 19 20 17 18 19 20 21 22 23 24 21 22 23 24 25 26 27 28 25 26 27 28 29 30 31 32 29 30 31 or*5 nd Movie Index (1 Page). or*1 17 Movie Index (2 Page). or Movie starts.
FUNCTION (continued) Photo Input Function (continued) Other You can select the background pattern on “Background” from “Function Menu.” Function Menu Background Selection Description Select preferred background pattern. 1: Striped texture of gray 2: Green checked pattern 1→2 Press button whenever you want to return from full size image to index. The file information is displayed by pressing button. *The size of the image depends on the resolution for the image.
FUNCTION (continued) ENGLISH Photo Input Function (continued) CAUTION The picture may not be displayed on this monitor in case of copying, viewing or editing by computers, etc. Do not connect any apparatus other than DSC, USB card reader, and SD card/MMC to the Photo Input connector. It causes the malfunction. Do not connect a DSC and USB card reader with USB HUB. Pictures may not be displayed correctly, or it causes the malfunction.
FUNCTION (continued) Audio Switching NICAM / Sound Multiplex(including A2) (TV mode) You can make optimum use of available audio by pressing bottom of remote control. Audio can be switched only if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when only mono sound is received. These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
FUNCTION (continued) ENGLISH Power Save Mode When AV input is selected You are provided the function to save power consumption when no signal is detected in AV input. Set to On in “Video Power Save” from Function Menu, which leads to the power save mode in AV1 /AV2 /HDMI1 /HDMI2 and the Standby mode in other AV input. (Please see the table below for details) Refer to 27 about “Video Power Save”.
FUNCTION (continued) DVD Player / STB Selection You can use this remote control to operate DVD Player and Set Top Box of other makers as well as this set. After pressing button, press (or hold) the required buttons to select the maker and type as shown below. Set up hint Example: HITACHI DVDw 1. Set up the maker. Press button to indicate the DVD LED on the remote control. While the DVD LED is blinking (Approx. 30 Seconds), press and q buttons. + 2. Set up the maker type.
Before calling service technician, check the following tables first. If the problem is not be solved with the suggested procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself. When Following Messages Appear on the Screen Message Condition / Action ENGLISH TROUBLESHOOTING Page Power Save This indicates it is in Power Save mode. (in AV/RGB mode) The indicating lamp lights in orange. 27 , 52 No Sync.
TROUBLESHOOTING (continued) Symptom and Check List (continued) Symptoms No picture The Indicating lamp → Off No picture The Indicating lamp → Orange It means that the unit is in “Power Save mode”. Check list Page Check if the Power Cord is plugged into the socket firmly. Check if the Main Power is ON. Check if all the cables of the external equipments are connected correctly and firmly. Check if the power of the external equipments is ON. Check if the TV/AV mode has been selected correctly.
TROUBLESHOOTING (continued) Symptoms Check list Cannot display the image from “Photo Input function”. Check the connecting equipments and image format. (Please refer to “Photo Input function”.) Page 45 , 49 , 50 The image on the screen is moving in an oblique direction. (PC input mode only) Adjust “Horizontal Clock” and “Clock Phase”. 25 The coarse horizontal stripes could be seen in full-display mode. (PC input mode only) Adjust “Horizontal clock”. 25 Try “Auto Adjust”.
PRODUCT SPECIFICATIONS SPECIFICATION Panel Display dimensions Resolution Approx. 32 inches (698 (H) x 392 (V) mm, diagonal 801mm) Approx. 37 inches (820 (H) x 461 (V) mm, diagonal 941mm) 1366 (H) x 768 (V) pixels 1366 (H) x 768 (V) pixels Net dimensions including Stand: 813(W)x663(H)x350(D) mm excluding Stand: 813(W)x584(H)x114(D) mm including Optional Stand: 940(W)x736(H)x350(D) mm excluding Optional Stand: 940(W)x657(H)x119(D) mm Net weight including Stand: 27.6kg excluding Stand: 21.
PRODUCT SPECIFICATIONS (continued) ENGLISH Signal Input RGB terminal (D-sub 15-pin connector) Pin Input signal 1 R 2 G or sync on green 3 B 4 No connection 5 No connection 6 R.GND 7 G.GND 8 B.GND 9 No connection Sync signal type Priority 10 GND H/V separate sync. 1 11 No connection H/V composite sync. 2 12 [SDA] sync.on Green * 3 13 H. sync or H/V composite sync 14 V.sync. [V.
PRODUCT SPECIFICATIONS (continued) Recommended Signal List With HDMI input Signal mode No. Signal Name 1 2 3 4 5 6 7 8 9 VGA 576i 480i 576p 480p 1080i/50 1080i/60 720p/50 720p/60 Resolution Vertical frequency (Hz) Horizontal frequency (kHz) Dot clock frequency (MHz) 640 X 480 720(1440) X 576 720(1440) X 480 720 X 576 720 X 480 1920 X 1080 1920 X 1080 1280 X 720 1280 X 720 59.94 50.00 59.94 50.00 59.94 50.00 60.00 50.00 60.00 31.47 15.63 15.73 31.25 31.47 28.13 33.75 37.50 45.00 25.18 27.00 27.
PRODUCT SPECIFICATION (continued) ENGLISH Recommended Signal List (continued) With Multi Picture Function 2-Picture Input terminal Sub Main AV1 ~AV5 AV1 AV2 TV PAL, SECAM NTSC3.58/4.43 576i, 576p 480i, 480p 720p/50, 60 1080i/50, 60 TV AV1~AV5 PAL NTSC3.58 SECAM NTSC4.