Colour LCD Television Model Name 19LD4550C 19LD4550U 22LD4550C 22LD4550U 26LD4550C 26LD4550U 32LD4550C 32LD4550U READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE For future reference, record the serial number of your television. SERIAL NO. This serial number is located on the rear of the television. Ver.
USER'S MANUAL Thank you for purchasing the Hitachi LCD Television.Please read this user’s manual carefully before operating this product. To ensure proper operation, please read and follow ALL the instructions, especially the “IMPORTANT SAFETY INSTRUCTIONS” and “SAFETY PRECAUTIONS”. Please keep this user's manual for future reference.
English Contents IMPORTANT SAFETY INSTRUCTIONS................................................................ 1 INTRODUCTION..................................................................................................... 2 About This Manual............................................................................................................2 Trademark Credits............................................................................................................2 About Software..............
WATCHING TV / PROGRAMME CONTROL........................................................ 29 Turning On The TV.........................................................................................................31 Programme Selection.....................................................................................................31 Volume Adjustment.........................................................................................................31 Quick Setup.....................................
OPTION CONTROL.............................................................................................. 56 English Menu Language Selection..............................................................................................56 Time Zone Setup............................................................................................................57 Clock Setup....................................................................................................................
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Read this instruction thoroughly. Retain this instruction for future reference. Heed all warnings and cautions to prevent possible danger. Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may shorten its service time. Do not block any ventilation openings. Install the product in accordance with the manufacture’s instructions.
English INTRODUCTION Thank you for purchasing the Colour LCD Television. We hope that you will enjoy the great performance of this product. This Colour LCD Television has been designed to meet the international standards. However, it could cause personal injuries and property damage if improperly handled. In order to prevent potential danger and obtain maximum benefit from your set, please observe the following instructions when installing, operating, and cleaning the product.
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ************** DO read the operating instructions before you attempt to use the equipment.
English SAFETY PRECAUTIONS For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries and/or damage to your property or this product.
CAUTION There is a risk of fire, electric shock, or serious injury. ■ Do not insert liquids or any foreign objects (such as metals or flammable items) inside the unit. ● In case it happens, turn off the main power, unplug the Power Cord, and contact your dealer immediately. ● Use special caution when younger children are around the unit. ■ Do not remove cover, or modify the product. ● High-voltage components are installed inside of the unit.
English SAFETY PRECAUTIONS (continued) CAUTION ■ Do not place your fingers into the gap at the opened front door of the unit. ● If your fingers are caught in the front door, you may be injured. ● Do not allow children to touch the front door or play near it. ■ Do not place the unit at a dusty place. It could cause malfunction. ■ Do not cover or block any ventilation holes on the product. The unit would overheat, and it could cause fire or damage the product which may shorten its service life.
CAUTION ■ Adjust the headphone volume properly. ● Excessive sound pressure from headphones might cause hearing loss. PRECAUTIONS ■ Do not install areas where it will be subjected to high temperatures. It could damage the cabinet or parts of the product. ● Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. ● Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.
English OVERVIEW •• Large-screen and high-definition LCD panel. •• Improved Digital signal processor. •• Good quality sound. •• Various functions as Digital Terrestrial Television (More TV channels, EPG, etc). •• 3 Scart terminals installed. •• Accept more digital input devices with 2 HDMI terminals located on front and rear. •• Great diversity of connecting terminals to cover wide range of audio-visual equipments. •• Photo Input function with Slide Show. •• SD Card Slot installed.
English PREPARATION Front Panel Controls ■ Image shown may differ from your TV. ■ If your TV has a protection film attached, remove the film and then wipe the TV with a soft cloth. + 1 - + - P 2 3 OK 4 5 6 1 Volume Use these two buttons to adjust volume up/down. In OSD menu, use these two buttons to switch the selection left and right. 2 Program Use these two buttons to select channels In OSD menu, use these two buttons to switch the selection up and down.
COMMON INTERFACE English Back Panel Information 1 3 AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT RGB IN (PC) 4 AV 1 11 R AUDIO L 2 VIDEO S-VIDEO 10 AV 2 AV IN 3 Pb 12 H/P Pr HDMI IN 2 HDMI IN 1 (DVI) RS-232C IN (SERVICE ONLY) 5 COMPONENT IN 5 1 6 7 8 7 8 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 RGB/DVI Audio Input Connect the audio from a PC or DVI.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. (Only 26/32) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages. Assemble the Base with the Stand as shown. Fix the bolts securely at the bottom of the Base.
English Detaching Stand (Only 26/32) ■ Image shown may differ from your TV. (Only 26/32) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages. Loosen the bolts from the bottom of the Base. (3 bolts for 26” TV and 4 bolts for 32” TV). Separate the Base from the Stand as shown. (Only 19/22) Carefully place the TV screen side down on a cushioned surface to protect the screen from scratches and damages.
Before assembling the wall mounting, make sure the bolts are fully tightened on the wall mount bracket. If not, the TV may tilt after the installation (Only 26/32) Remove the bolts from the back of the Stand. (3 bolts for 26” TV and 4 bolts for 32” TV). Remove the Stand Base as shown. Secure the wall mount bracket to the back of the TV. (Refer to the instructions for the wall mount bracket.) (Only 19/22) Remove the 3 bolts from the back of the Base. Remove the Stand Base as shown.
English EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. HD Receiver Setup Pb Pr Connecting with a component cable COMPONENT IN Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the TV. Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV. Turn on the digital set-top box.
English Connecting a set-top box with an HDMI Connect the HDMI output of the digital set-top box to the HDMI IN1(DVI) or HDMI IN 2 jack on the TV. HDMI IN 1 (DVI) Turn on the digital set-top box. (Refer to the user manual for the digital set-top box.) Select HDMI1 or HDMI2 input source using the INPUT button on the remote control. Connecting with a HDMI to DVI cable AUDIO IN (RGB/DVI) Connect the digital set-top box to HDMI IN 1(DVI) jack on the TV.
English Digital Audio Out Setup - Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT 1 RGB IN (PC) Pb Pr HDMI IN 1 (DVI) RS-232C IN (SERVICE ONLY) Set the “ TV Speaker option - Off ” in the AUDIO menu. (► p.
English DVD Setup When connecting with a component cable Connect the video outputs (Y, Pb, Pr) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Pb Connecting with a component cable. Pr Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV. COMPONENT IN Turn on the DVD player, insert a DVD. Select Component input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions.
Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the TV. AV 1 Turn on the DVD player, insert a DVD. Select AV1 input source using the INPUT button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source. Refer to the DVD player's manual for operating instructions. NOTE Any Euro scart cable used must be signal shielded. S-VIDEO Connect the audio outputs of the DVD to the AUDIO input jacks on the TV.
Connect the HDMI output of the DVD to the HDMI IN 1(DVI) or HDMI IN 2 jack on the TV. Select HDMI1 or HDMI2 input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. NOTE The TV can receive video and audio signals simultaneously when using a HDMI cable. If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
English VCR or DVD Setup ■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. ■ If 4:3 picture format is used for an extended period, the fixed images on the sides of the screen may remain visible. Connecting with a RF cable Wall Jack Antenna Connect the ANT OUT socket of the VCR to the ANT IN socket on the TV. Connect the aerial cable to the ANT IN socket of the VCR.
AV 1 Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select AV1 input source using the INPUT button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source. NOTE Any Euro scart cable used must be signal shielded. VIDEO S-VIDEO Connect the audio outputs of the VCR to the AUDIO input jacks on the TV.
COMMON INTERFACE S-VIDEO VIDEO Select AV3 (CVBS) input source using the INPUT button on the remote control. Operate the corresponding external equipment. Refer to external equipment operating guide. AV IN 3 H/P HDMI IN 2 Camcorder R AUDIO L Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) Insertion Of CI Module - To view the encrypted (pay) services in digital TV mode.
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV Select RGB input source using the INPUT button on the remote control.
English Connecting with a HDMI to DVI cable AUDIO IN (RGB/DVI) Connect the DVI output of the PC to the HDMI IN 1(DVI) jack on the TV. HDMI IN 1 (DVI) Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV. Select HDMI1 input source using the INPUT button on the remote control. NOTE To enjoy vivid picture and sound, connect a PC to the TV. Avoid keeping a fixed image on the TV’s screen for prolonged periods of time.
RGB[PC], HDMI[PC] mode English Supported Display Resolution HDMI[DTV] mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 720x480 31.469 / 31.5 59.94 / 60 31.469 59.94 720x480 15.734 / 15.6 60 37.684 75.00 720x576 31.25 50 37.879 60.31 720x576 15.625 50 37.500 50 640x480 800x600 832x624 1024x768 1280x720 46.875 75.00 49.725 74.55 44.96 / 45 59.94 / 60 48.363 60.00 33.
English Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase. The displayed image will be unstable for a few seconds while the auto configuration is in progress.
If the picture is not clear after auto configure and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB [PC]. OPTION OK OK Move Screen RETURN OK Menu Language Auto Config Input List H.Position Screen OK V.Position Factory Reset Phase Size Move RETURN 61 49 16 127 Resolution 1 MENU 2 3 4 Select OPTION. OK or OK or OK or Select Screen. Select H. Position, V.
English Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode : RGB「PC」mode. Screen Resolution OK OK Move RETURN OK Auto Config 1 1024 X 768 H.Position 61 2 1280 X 768 V.Position 49 3 1360 X 768 Phase 16 Size OK Move 127 Resolution 1 MENU 2 3 4 Select OPTION. OK or Select Screen. OK or Select Resolution OK or Select desired resolution.
Remote Control Key Functions When using the remote control, aim it at the remote control sensor on the TV POWER INPUT POWER SLEEP INPUT i INFO i 2 3 4 5 6 7 8 9 GUIDE Select your desired picture format. SLEEP 0~9 number GUIDE 0 CH LIST AD FAV ADD/ERASE MUTE RETURN MENU P External input mode rotate in regular sequence. or Display the Input List. Show the channel information. RATIO 1 Switches the TV on from standby or off to standby. Q.VIEW Set the Sleep Timer Selects a programme.
English 1 POWER TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. SLEEP INPUT i 1 2 3 4 5 6 7 8 9 Coloured buttons TEXT GUIDE Show the TELETEXT screen.. S 0 CH LIST These buttons are used for teletext (on TELETEXT models only). SUBTITLE Recalls your preferred Teletext subtitle page or display the channel subtitle.
- When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the / I, INPUT, P + - or + - button on the TV or press the POWER, INPUT, P + - or + - button on the remote control and the TV will switch on.
English Quick Setup There are few options you need to set up in order to let your TV work properly. The first time you turn on your TV, the WELCOME screen is displayed. Please follow the instructions below to complete the setup. Language Country Mode Please select your Language: Previous English Español Français Deutsch Italiano Česky Hrvatski OK Selecting the environment. Select the Country Home In Store Choose the setting mode you want.
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
English Auto Programme Tuning Use this function to find and store all available programmes automatically in both analog and digital mode.
The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. When the languages you selected as the primary for Audio Language are not supported, you can select language in secondary category.
English Manual Programme Tuning (In Digital Mode) Manual Tuning lets you manually add a programme to your programme list. SETUP OK OK Move DTV RETURN OK Country Transmitter: 1st Audio Language Service Number: 2nd Audio Language Service Name: Auto Tuning VHF/UHF Channel Manual Tuning Signal Strength OK Move 11 BBC NEWS 24 Programme Skip Programme Swap Programme Fine Tune 1 2 3 4 MENU Select SETUP. OK or Select Manual Tuning. OK or Select DTV. OK or Start Tuning.
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire TV SETUP OK OK Move RETURN OK OK Move Country Programme Number: 1st Audio Language Programme Name: 2nd Audio Language Frequency Auto Tuning Colour System Auto Manual Tuning Sound System B/G Programme Skip Search Up Programme Swap Search Down RETURN 45.00 Programme Fine Tune 1 MENU Select SETUP. 2 3 4 OK or Select Manual Tuning. OK or Select TV. OK or Select OK.
English Programme Skip When a programme number is skipped, it means that you will be unable to select it using (P + / -) button during TV viewing. This function enables you to skip the stored programmes.
English Assigning Programme Fine Tune(In Analog Mode) Normally fine tuning is only necessary if reception is poor SETUP Programme Fine Tune OK 1 2 3 4 OK Move RETURN OK OK Move RETURN Country 900 1st Audio Language 901 55.8 MHz 2nd Audio Language 902 209.25 MHz Auto Tuning 903 223.25 MHz Manual Tuning 904 Programme Skip 905 590.3 MHz Programme Swap 906 623.25 MHz Programme Fine Tune 907 687.25 MHz 908 759.25 MHz 909 847.25 MHz MENU BBC1 Select SETUP.
English Selecting The Channel List You can check which programmes are stored in the memory by displaying the programme table. ■ Displaying Channel List 1CH LIST Display the Channel • Some programmes with the channel number shown in the Channel List indicate there is no station name assigned. List. ■ Selecting a Programme in the Channel List 1 Select a Programme. 2 OK or Switch to the chosen programme number. ■ Displaying the Favourite List 1 FAV Display the Favourite List.
English Input List Selects a label for each input source. Input List OPTION OK OK Move RETURN OK Menu Language 1 Antenna Input List 2 AV1 Time 3 AV2 Subtitle 4 AV3(CVBS) Teletext Language 5 AV3(S-Video) Diagnostics 6 Component Common Interface 7 RGB-PC Factory Reset 8 HDMI 1 9 HDMI 2 1 MENU INPUT Select OPTION. 2 3 4 OK or Select Input List. OK or Select the Input. OK or Select OK OK Move For the quick input list.
English PICTURE CONTROL Picture Size (Aspect Ratio) Control You can watch the screen in various picture formats; 16:9, Original, 4:3, 14:9, ZOOM 1, ZOOM 2 and Just Scan (only 720p, 1080i, 1080p). If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
• 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. • Zoom1 The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped.
English Preset Picture Settings Picture Mode-Preset You can adjust the best picture appearance from preset value in picture mode.. • Picture mode adjusts the TV for the best picture appearance. Select the preset value in the picture mode menu based on the programme category. PICTURE Move Aspect Ratio Zoom 1 Picture Mode Sport RETURN Brightness 50 Contrast 90 60 Colour 60 Sharpness Colour Temperature Backlight Normal • Picture mode contains “Dynamic, Nature, Cinema, Sport, Game and User”.
English Colour Temperature (Normal/Warm/Cool) Choose one of three automatic colour adjustments. PICTURE PICTURE Move Aspect Ratio Zoom 1 Picture Mode User Move RETURN Zoom 1 Picture Mode User Brightness 50 Contrast 90 Contrast 90 Colour 60 Colour 60 Sharpness 70 Sharpness Colour Temperature Backlight Colour Temperature Warm MENU 70 Cool Backlight 100 Advanced Control Advanced Control Select PICTURE.
English Manual Picture Adjustment Picture Mode-User option You can adjust the best picture appearance from preset value in picture mode or adjust by yourself.
Flesh Tone Flesh tone will be more natural. Adaptive Luma Control Automatically adjust the brightness and contrast after analyzing the input signal. Noise Reduction Removes interference up to the point where it does not damage the original picture.
English Picture Mode You can select the optimal images and picture when connecting AV devices to external input. 1 User Dynamic Nature Game Sport Cinema Select and set the picture Mode. • If you select "Cinema" in AV mode, Cinema mode will be selected both for Picture Mode and Sound Mode in PICTURE menu and AUDIO menu respectively. • If you select “User” in AV mode, the picture and image which you initially set will be selected.
English SOUND CONTROL Sound Setting Adjustment -User Mode Adjusting the audio equalizer. AUDIO Move Sound Mode AUDIO RETURN OK User Sound Mode OK Move Equalizer 120Hz 0 Equalizer 120Hz 0 Equalizer 500Hz 0 Equalizer 500Hz 0 Equalizer 1.5KHz 0 Equalizer 1.
English Preset Sound Settings-Sound Mode You can select your preferred sound setting; Clear Voice, Standard, Music, Cinema, Sport, Game or user. You can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the programme content. AUDIO AUDIO Move Sound Mode Move Sound Mode RETURN Standard Equalizer 120Hz 4 Equalizer 120Hz -3 Equalizer 500Hz 1 Equalizer 500Hz -3 Equalizer 1.
You can adjust the sound balance of the speakers to preferred levels. AUDIO OK Sound Mode OK Move Equalizer 120Hz 0 Equalizer 500Hz 0 Equalizer 1.5KHz 0 Equalizer 5KHz 0 Equalizer 10KHz 0 Balance 1 2 3 OK 0 Virtual Surround On Auto Volume Digital Audio Out Off PCM MENU OK RETURN User Select AUDIO. or Select Balance. Make Desired Adjustment. • Press the MENU or EXIT button to return to normal TV viewing. • Press the RETURN button to move to the previous menu screen.
English Auto Volume Level AVL automatically remains on the same level of volume if you change programmes. AUDIO Move Sound Mode Equalizer 120Hz 0 Equalizer 500Hz 0 Equalizer 1.5KHz 0 Equalizer 5KHz 0 Equalizer 10KHz 0 Balance 1 RETURN User 0 Virtual Surround On Auto Volume Digital Audio Out On PCM MENU Select AUDIO. 2 OK or Select Auto Volume 3 Select On or Off • Press the MENU or EXIT button to return to normal TV viewing.
This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to Dolby Digital. If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM.
English TV Speakers On/ Off Setup You can adjust the internal speaker status. If you wish to use an external Hi-Fi system, turn off the TV internal speakers. AUDIO Move TV Speaker Type RETURN On Audio Description Audio Description Volume Level 1 MENU Select AUDIO. 2 OK or Select TV Speaker. 3 Select On or Off. • Press the MENU or EXIT button to return to normal TV viewing. • Press the RETURN button to move to the previous menu screen.
English Audio Description on/off Setup You can switch the Audio Description on or off. AUDIO Move TV Speaker Type Audio Description AUDIO OK OK TV Speaker Move RETURN On Type Audio Description Volum OK OK TV Speaker Audio Description Audio Description Volume Level Audio Description Volume Level 1 RETURN On MENU Select AUDIO. 2 OK Select Type. or 3 Select Audio Description. 4 5 OK or Select Audio Description Volume Level Adjust the Volume.
English OPTION CONTROL Menu Language Selection Use this function to select your desired language for displaying OSD(On Screen Display) and indications. Menu Language OPTION OK 3 4 Move OK RETURN Menu Language 1 български Input List 2 Česky Time 3 Dansk Subtitle 4 Deutsch Teletext Language 5 Ελληνικά Diagnostics 6 English Common Interface 7 Español Factory Reset 8 Français 9 Hrvatski 10 Italiano 1 MENU 2 OK OK Move RETURN Select OPTION. OK or Select Menu Language.
English TIME SETTING Time Zone Setup When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
English Clock Setup The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. Time Clock OK OK Move RETURN Move Auto Synchronization Time Zone Date Clock Sleep Timer Off 2002/01/03 Time 17:10:28 Timer Off On Timer 00:00:00 0 On Volume On Programme Off Timer 1 MENU 00:00:00 Select OPTION. 2 3 4 OK or Select Time. OK or Select Clock.
The Off timer function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off timer function overrides the On timer function if both are set to the same time. The clock needs to be turned on and set at the real time before you set the Auto Timer. The Auto On/Off Timer only operates on real clock time is set and the TV is in standby mode.
English Sleep Timer Setting You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Time Move Time RETURN Move Time Zone Clock Sleep Timer 1 MENU 2 3 Clock Off Sleep Timer 10 Minutes Select OPTION. OK or OK or 4 RETURN Time Zone Select Time. Select Sleep Timer.
This function enables you to view information about Model name, software Version and Serial Number. Diagnostics OPTION RETURN OK OK Move RETURN Menu Language Input List Time Manufacturer: HITACHI, Ltd. Model/Type: H000001 App Verison: XXXXXX_XXX_X Software Version: XXXX_XXXXXX_X_XXX_XX Subtitle Teletext Language Diagnostics Common Interface Factory Reset 1 MENU 2 3 Select OPTION. OK or OK or Select Diagnostics. Display Model Name, Serial Number and Software Version.
English Common Interface(CI) This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output.
Set Password & Lock System Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. LOCK LOCK OK OK Move RETURN EXIT Password Password 1 MENU 2 OK *** Select LOCK. or 1 2 3 4 5 6 7 8 9 Input a 4-digit password 0 3 Select Set Password. 4 OK or 1 2 3 4 5 6 7 8 9 0 Input a 4-digit password.Be sure to remember this number!Re-enter new password for confirm. • Press the MENU or EXIT button to return to normal TV viewing.
English Block Programme Blocks any programmes that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System “On”.
This function operates according to information from the broadcasting station. Therefore if the signal has no this information, this function does not operate. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
English Key Lock The key on the front panel can be locked by this function. LOCK Move RETURN Block Programme Parental Guidence Set Password Key Lock 1 2 On MENU OK Select LOCK. or 1 2 3 4 5 6 7 8 9 Input a 4-digit password 0 3 Select Key Lock. 4 Select Yes or No. • Press the MENU or EXIT button to return to normal TV viewing. • Press the RETURN button to move to the previous menu screen.
This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP system. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP is more modern method allowing quick and easy selection of teletext information.
English Special Teletext Functions ? ■ REVEAL Select this menu to display concealed information, such as solutions to riddles or puzzles. ■ HOLD Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.
English APPENDIX Initializing (Reset to original factory settings) Reset all the system settings to factory default values Factory Reset OPTION OK OK Move RETURN EXIT Password Menu Language Input List Time Subtitle Teletext Language Diagnostics Common Interface Factory Reset 1 MENU 2 3 Select OPTION. OK or OK or Select Factory Reset. 1 2 3 4 5 6 7 8 9 Input Password. 0 4 OK Reset • Press the MENU or EXIT button to return to normal TV viewing.
English Troubleshooting The TV does not operate properly. The remote control does not work ■ Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, STB etc. ■ Install new batteries.
Picture OK & No sound ■ Press the button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one of the speakers ■ Adjust Balance in menu option. Unusual sound from inside the TV ■ A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. There is a problem in PC mode.
English WARRANTY Thank you for purchasing this Hitachi Television. In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that ... 1. t he product has been installed and used only in accordance with the instructions supplied with the product. 2.
Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. Consumer Affairs Department UNITED KINGDOM Tel: 0870 405 4405 Email: consumer.mail@hitachi-eu.com HITACHI EUROPE S.A. GREECE Te l : 210 6837200 Fax: 210 6835694 Email: DMGService.GR@hitachi-eu.com HITACHI EUROPE GmbH Munich Office GERMANY Te l : 089-991 80-0 Fax: 089-991 80-224 Hotline: 0180-551 25 51 (12ct/min.) Email: dmg-mun.service@hitachi-eu.com HITACHI EUROPE S.A. SPAIN Te l : 93 409 2550 Fax: 93 491 3513 Email: atencion.cliente@hitachi-eu.