INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUAL INSTRCUTIUNI РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ UPUTE ZA UPORABU UPUTSTVO ZA UPOTREBU PRIRUČNIK FLAT DIGITAL TV DIGITALER FLACHBILDFERNSEHER TELEVIZOR DIGITAL CU ECRAN PLAT LCD / LED ТЕЛЕВИЗОР FLAT DIGITALNI TV PRIJAMNIK FLAT DIGITALNI TV ZARAVAN DIGITALNI TELEVISOR
Contents Preparation & Safety Precautions........................... 2 Preparation.............................................................. 4 DVD Mode Important Information............................ 4 Specifications.......................................................... 5 PC Typical Display Modes....................................... 5 Remote Control RC 4862........................................ 6 General DVD Operation.......................................... 7 Viewing the Connections.........
Preparation & Safety Precautions Before lightning or storms, or if the TV is not going to be used for a while (e.g. if going away on holiday), disconnect the TV set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.
Waste Disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Batteries, including those which are heavy metal-free, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area. • Don’t try to recharge batteries. Danger of explosion.
On cleaning Preparation For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this device in moderate climates. • Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. DVD Mode Important Information (*) Available for TV-DVD models. Safety Precautions CAUTION DVD Player is a class 1 laser product.
For advice on where to purchase accessories, please contact the store where you purchased your equipment. Specifications TV BROADCASTING PAL/SECAM B/G D/K PC Typical Display Modes RECEIVING CHANNELS VHF (BAND I/III),UHF (BAND U), HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz.
Remote Control RC 4862 1. Standby: On / Off switch of the TV 2. Numeric buttons: Used to navigate channels and enter passwords, text etc. 3. TV: Displays channel list / Switches among broadcast types 4. Volume +/5. Mute: Completely turns off the volume of the TV 6. Navigation buttons: Helps navigate menus, content etc. and displays the subpages in TXT mode when pressed Right 7. Menu: Displays TV menu 8. OK: Confirms user selections, holds the page (in TXT mode), views channel list (DTV mode) 9.
General DVD Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons / DVD Playback Movie Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop Skip backward/ forward Skip backward/ forward Rotate Skip backward/forward / Highlights a menu item / Shifts the zoomed picture up or down (if available).
Viewing the Connections Note:Connections may vary depending on your model. Connection Description Other Details Scart socket inputs or outputs for external devices. Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Green, Blue, Component Video Inputs (YPbPr) are used for connecting Red; Rear component video. side, Optional PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the TV via YPbPr.
Viewing the Connections - continued Connection Description Other Details Headphone jack is used for connecting an external headphone to the system. Side Video input is used for connecting video signals of a camcorder or any other video device. Use Side Audio inputs to enable sound connection. Side, Yellow RCA jack, optional. Side Audio inputs are used for connecting audio signals of an AV device. Side, Red and White RCA jacks, optional. Side, AV Phono jack, optional.
Environmental Information TV and Operating Buttons This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode. The Power Save Mode settings can be found In the ‘Picture’ section of the Main Menu. Note that some picture settings will be unavailable to be changed.
Antenna Connection: Step 1 - Checking the TV and Accessories Note: You should check the accessories after purchasing. Make sure that each accessory is included. All models are supplied with the following items: Instruction Book, Remote Control, 2 X AAA Batteries and depending on which model you purchased, AV connection Leads. Connect the aerial/cable or satellite TV plug to the Aerial, Cable or Satellite INPUT socket located at the rear of the TV. Satellite and Cable connection are dependent on the model.
Step 5 - First Time Installation When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK. First Time Installation (FTI) screen will be displayed next. Set your preferences using the navigation buttons and when finished, press OK to continue. You can activate Store mode option to be available in “Other settings” menu and your TV’s features will be illustrated on the top of the screen. A confirmation screen will be displayed.
• Some stream packets may not be recorded because of signal problems, so sometimes video may freeze during playback. • You can use USB hubs with your TV’s USB inputs. External power supplied USB hubs are recommended in such a case. It is recommended to use the TV’s USB input(s) directly, if you are going to connect a USB hard disk. Media Playback via USB Input You can connect a 2.5” and 3.
TV Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Sound Mode You can select a sound mode. (If the selected channel supports). AVL (Automatic Volume Limiting) Function sets the sound to obtain fixed output level between programmes. DTS TruSurround Enables or disables the DTS TruSurround.
Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only if the broadcaster supports that additional narration track. Note: Audio description sound feature cannot be available in recording or time shifting mode. Auto TV Off You can set the timeout value of auto off feature.
IMPORTANT: Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature. General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Configuring Parental Settings To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.
Notes: Troubleshooting & Tips Tv will not turn on Make sure the power cord is plugged in securely to wall outlet. The batteries in the remote control may be exhausted. Press the Power button on the TV. Poor picture • Have you selected the correct TV system? • Low signal level can cause picture distortion.Please check antenna access. • Check if you have entered the correct channel frequency if you have done manual tuning.
Multichannel audio Means that the TV program is aired in several audio versions, for example, in two different languages. This is possible if on an analogue TV each of the two channels of the stereo tracks for left and right channels are occupied with one audio track in mono (single channel).In digital TV multiple audio streams can be broadcasted and selected on the receiver side.
Supported File Formats for USB Mode Media Movie File Extension Format Remarks Video Audio .mpg .mpeg MPEG1,2 MPEG Layer 1/2/3 .dat MPEG1,2 .vob MPEG2 (Maximum resolution/Bit rate etc.) MPEG2 .mkv H.264, MPEG1,2,4 EAC3/ AC3 .mp4 MPEG4, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2, H.264 PCM/MP3 MAX 1920x1080 @ 30P 20Mbit/sec MPEG2, MPEG4 Music Photo Subtitle .avi Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2, H.264 PCM .