INSTRUCTION MANUAL 22’’ Colour TV 22HYC06U 402/8930 Important - Please read these instructions fully before installing or operating and keep for future reference. These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.
Contents Safety Information...................................................2 Preparation.......................................................... 2 Intended Use....................................................... 2 Power source....................................................... 3 Positioning the TV................................................ 3 Power cord and plug............................................ 3 Moisture and Water............................................. 3 Ventilation.......
Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons.
Safety Information DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions. DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
Safety Information Heat sources and Flames Batteries • Do not expose the TV to direct sunlight or other heat sources. • • The TV should not be placed near to open flames and sources of intense heat such as an electric heater. • Ensure that no open flame sources, such as lighted candles, are placed on top of the TV. Headphone Volume • Excessive sound pressure from earphones and headphones can cause hearing loss, please take care.
Safety Information Connection to a Television Distribution System (Cable TV etc.) from Tuner Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard.
Getting Started Support Technical experts are available 7 days a week • Simple help and advice on setting up your digital equipment (image). • Guidance on connecting other devices to your television such as a DVD player, Sky, home cinema system or a games console. • Order spare parts, including that lost remote control. • Any other technical issues you may need assistance with.
Getting Started Notifications & Features & Accessories Environmental Information Features • Remote controlled colour LCD TV. This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: • Fully integrated digital TV (DVB-T) If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode. The Power Save Mode settings can be found In the ‘Picture’ section of the Main Menu.
Getting Started Control Buttons on the TV Inserting the Batteries into the Remote Lift the cover on the back of the remote upward gently. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity) Replace the cover. TV Control Switch & Operation Connect Power IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket.
Getting Started Notification “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.” For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Getting Started Remote Control 1. Standby / on 2. My button 1 (*) 3. No Function 1 / 2 / SOURCE 4. Changes equalizer modes 5. Picture mode selection PRESETS 1 2 3 4 5 6 7 8 9 .,/@ 6. Numeric buttons 7. TV - AV / TV Channel list 8. Electronic programme guide (in DVB channels) 9. Menu on-off 10. Navigation buttons / Left-Right (TXT Subpages) 0 11. Back / Index page (in TXT mode) Q. MENU 12. Favourite channels 13. Volume Up / Down 14. Info / Reveal (in TXT mode) 15. No Function 16.
Getting Started Connections Connector Type Cables Device Scart Connection (back) VGA Connection (back) SIDE AV PC/YPbPr Audio Connection (side) Side Audio YPbPr or PC Connection Cable (Not supplied) HDMI Connection (back) SPDIF Connection (back) SIDE AV Side AV (Audio/Video) Connection (side) HEADPHONE (Not supplied) Headphone Connection (side) YPbPr Video Connection (back) PC to YPbPr Connection Cable (Not supplied) USB Connection (side) CI Connection (side) CAM module NOTE: When connecting
Getting Started First Time Installation - USB Connections Switching On/Off To Switch the TV On Connect the power cord to the 220-240V AC, 50 Hz. To switch on the TV from standby mode either: Press the “ ” button, P+ / P- or a numeric button on the remote control. Press the side function switch until the TV comes on from standby. To Switch the TV Off Press the “ “ button on the remote control or press the side function switch until the TV switches into standby mode.
TV Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
TV Menu Features and Functions Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing. Sound Mode You can select a sound mode. (If the selected channel supports).
TV Menu Features and Functions Install and Retune Menu Contents Automatic Channel Scan (Retune) (If available) Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Analogue: Searches and stores analogue stations. Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations. Manual Channel Scan This feature can be used for direct broadcast entry. Analogue Fine Tune You can use this setting for fine tuning analogue channels.
Software Upgrade Your TV is capable of finding and updating automatically via the Aerial signal. Software upgrade search via user interface Remote control - does not operate • The batteries may be exhausted. Replace the batteries. Input sources - can not be selected Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software for Upgrade item and press OK button to check for a new software upgrade.
PC Input Typical Display Modes AV and HDMI Signal Compatibility The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Your TV supports up to 1920x1080.
Guarantee Product Guarantee This product is guaranteed against manufacturing defects for a period of Year This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
Product Fiche Commercial Brand:HITACHI Product No. 10097680 Model No. 22HYC06U Energy efficiency class A Visible screen size (diagonal,approx.
HITACHI 22HYC06U 32 22 56 22 50311454 English - 20 For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
50311453 Manufacturer: Hitachi Europe Ltd., Whitebrook Park, Lower Cookham Road, Maidenhead, Berkshire SL6 8YA U.K. Importer: Argos Ltd., 489 - 499 Avebury Boulevard, Central Milton Keynes, Buckinghamshire MK9 2NW U.K. www.hitachidigitalmedia.
QUICK GUIDE 22HYC06U 402/8930 Please read this quick guide fully before installing or operating because it contains important setup information and keep for future reference. For any help concerning set up and use of your TV please call theCustomer Helpline: 0345 604 0105 Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV.
2b ...or connect the aerial through a VCR... Aerial (RF) Socket SPDIF Coax.OUT Aerial (RF) Socket VCR Aerial (RF) Lead Optional Scart Lead TV to VCR (RF) connector lead VCR to TV wall socket ANT.IN AV-1 AV-2 VCR • It is recommended that a scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment.
...or through a VCR and satellite decoder. TFT-LCD TV SPDIF Coax.OUT • Scart Lead to AV-1 on TV. RF Lead from VCR to TV RF Lead from VCR to Satellite Aerial TV VCR ANT.IN RF Lead to Aerial Satellite LNB lead ANT.
connect the TV plug to the mains socket UK plug European plug insert plug... insert plug... ...and switch on Press the OPERATE/STANDBY button on the remote control or press the control switch,located on the left side of the TV. The TV will then switch on. Rear view 1. Up direction 2. Down direction 3. Programme/Volume/Av/Standby-on selection switch NB: When the set is first switched on, the set will be in standby. Press or channel up down (P- , P+) or numeric buttons (1, 2, 3, ...
start A.P.S. (Auto Programming System) 1 When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed. 2 • Use "up" or "down" buttons to select your language and press OK button to set selected language and continue. • After selecting the language, “First Time Installation” screen will be displayed, requiring you to set Country, Search Type, Teletext Language and Scan Encrypted options.
