㻌 HD COLOR CAMERA SYSTEM REMOTE㻌 CONTROL UNIT RU-1200JY/VR OPERATING INSTRUCTIONS Please read these operating instructions carefully for proper operation, and keep them for future reference.
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 Note: The model and serial numbers of your product are important for you to keep for your convenience and protection. These numbers appear on the nameplate located on bottom of the product. Please record these numbers in the spaces provided below, and retain this manual for future reference. Model No. 㻌 Serial No.
Contents Outline and features .......................................................................................................................................... 1 Facility names and functions ............................................................................................................................. 2 Function menu ...................................................................................................................................................
SAFETY INSTRUCTIONS Carefully read all safety messages in this manual and safety Instructions on your equipment. Follow recommended precautions and safe operating practices. SAFETY ALERT SYMBOL ! This is the “Safety Alert Symbol.” This symbol is used to call your attention to items or operations that could be dangerous to you or other persons using this equipment. Read these messages and follow these instructions carefully.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Cleaning Unplug this product from the wall outlet before cleaning.
14. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 15. Overloading Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock. 16.
WICHTIGE SICHERHEITSANWEISUNGEN 1. Alle Anweisungen lesen. Vor Betrieb des Erzeugnisses sollten alle Sicherheits-und Bedienungsanleitungen gelesen werden. 2. Die Anweisungen aufbewahren. Die Sicherheits-und Bedienungsanleitungen sollten fünftigen Bezug aufbewahrt werden. 3. Warnungen beachten. Die Warnungen auf dem Erzeugnis und in den Bedienungsanleitungen solten beachtet werden. 4. Anweisungen befolgen. Alle Bedienungsanleitung-und Verwendungsanweisungen sollten befolgt werden. 5.
14. Blitzschlag Für zusätzlichen Schutz des Erzeugnisses während eines Gewitters oder bei Nichtverwendung für lange Zeit den Stecker aus der Steckdose ziehen. Dies verhütet Beschädigung durch Blitzschlag und Netzspannungsstöße. 15. Überlastung Wandsteckdosen, Verlängerungskabel und eingebaute Bequemlickkeitssteckdosen nicht überlasten, da dies Feuer oder elektrischen Schlag verursachen kann. 16.
MISES EN GARDE IMPORTANTES 1. Lire les instructions Lire toutes les instructions de sécurité et de fonctionnement avant de faire fonctionner l’appareil. 2. Conserver ces instructions Conserver les instructions de sécurité et de fonctionnement á des fins de référence ultérieure. 3. Tenir compte des avertissements Tous les avertissements qui figurent sur l’appareil et dans le mode d’emploi devront être respectés. 4. Observer les instructions Observer toutes les instructions de fonctionnement et d’utilisation.
14. Foudre Pour renforcer la protection de l’appareil pendant un orage, ou si l’on s’en éloigne ou qu’on reste longtemps sans l’utiliser, le débrancher de la source d’alimentation. Ceci permettra d’éviter tout dommage de l’appareil dú á la foudre et aux surtensions de ligne. 15. Surcharge Ne pas surcharger les prises, rallonges et prises multiples car cela pourrait entraîner un risque de feu ou de choc électrique. 16.
IMPORTANT NOTICE For USA These products have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Outline and features 1᧪General The remote control unit RU-1200JY/VR is connected to the camera control unit (CCU) for remote operation of the camera. The RCU and CCU can be up to 10 meters apart.㻌 With the one touch color temperature control function, the RU-1200JY/VR is ideal not only Studio but also OB van use. RU-1200JY: Lens iris control, pedestal control and preview switch are assembled with an axis joystick control knob.
Facility names and functions (Front) FRONT VIEW (JY type) A1 A2 A1 Camera power on/off A4 A2 Each type on/off control A3 Menu switch: Menu is displayed on the pix monitor with Color bar ON.
Facility names and functions (Front) FRONT VIEW (VR type) A1 A1 Camera power on/off A2 Each type on/off control A3 Menu switch: Menu is displayed on the pix monitor with Color bar ON.
Facility names and functions (Rear) REAR VIEW B2 B1 B3 B1 Remote-Input connector Input and output remote control data between the camera control unit . B2 EXT IRIS connector Connect to the external iris control module (optional) B3 PRE VIEW Connector (JY type only) Connect to preview switcher to switch the preview monitor input. .
Function menu㻌 The camera head is connected with the CCU and the RU/SU as an operational camera system, The CCU output display TOP MENU on the PIX out monitor as follows. This is for Video operator at the CCU. 㹒㹍㹎 㹋㹃㹌㹓 PIX MENU: open this menu by pushing the MENU SW in the ڦ㹁㹍㹊㹍㹐 㸸㸼 RCU. 㹂㹃㹒㸿㹇㹊 㸸㸼 㹋㸿㹇㹌㹒㹃㹌㸿㹌㹁㹃㸸㸼 㹄㹇㹊㹃 㸸㸼 㹑㹃㹒㹓㹎 㹁㸿㹐㹂 㸸㸼 Item Main Menu Description 1 COLOR Change screen to COLOR main menu items display.
Function menu㻌 1. COLOR menu structure which are displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Function menu㻌 2. DETAIL menu structure which are displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Function menu㻌 3. MAINTENANCE menu structure which are displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Function menu㻌 4. FILE menu is displayed in the Pix monitor or are displayed in the viewfinder with at control head mode. ڦ㹄㹇㹊㹃 㹋㹃㹌㹓 㹄㹇㹊㹃 㹑㹃㹊㹃㹁㹒 㸸 㹑㹁㹃㹌㹃 㸮 㹑㹒㹍㹐㹃 㹄㹇㹊㹃 㸸 㹑㹁㹃㹌㹃 㸮 㹑㹒㹍㹐㹃 㸿㹊㹊 㹇㹌㹇㹒㹇㸿㹊㹇㹘㹃 5.
Operation procedure㻌 Item Function no. Camera head 㸯 Switch Operating procedure &$0 32:(5 ࣭ &$0 32:(5 switch on The camera head power on by this switch pressing. ࣭The camera head power off by this switch pressing more than 2 seconds continuously.
Item Function no. AUTO SETUP 㸳 Switch Operating procedure ࣭Switch settings can be combined with the following auto setup modes. (;7 &+$57 (1) Grayscale auto setup $872 6(783 (;7 &+$57 $872 6(783 (2) Auto skin tone (;7 &+$57 2 times) $872 6(783 (3) Auto Shading 1.Conduct grayscale auto setup by the following procedure.
Item Function no. AUTO SETUP (㸳 ) Switch Operating procedure 2. Auto skin tone the marker for auto shading on the viewfinder and PIX monitor screen.
Item Function Switch Operating procedure no. AUTO WHITE 㸴 $872 :+,7( ࣭Pickup a white scene and press the $872 :+,7( for automatic white balance adjustment. ࣭At error, the $872 :+,7( LED flashes for several seconds and the buzzer sounds. 㸵 AUTO BLACK ࣭Press the $872 %/$&. to cut off the light and automatically adjust the black balance.
Item Function Switch Operating procedure no. 㸯 㸯 Scene file 6&(1( ),/( ࣭Scene file adjustment values can be stored in memory by the following procedure. memory (1) Press the 0(025< switch. (2) The 0(025< LED begins blinking. (3) Press the scene file ( – or ) for storing data in the memory.
Item Function no. 㸯 㸲 㻺㻰㻛㻯㻯㻌㼒㼕㼘㼠㼑㼞㻌 㼟㼑㼘㼑㼏㼠㼕㼛㼚 Switch 㸺 1' 㸼 Operating procedure ࣭ND/CC selects ND filters or CC(ECC) filters. Each filters status are shown by the upper section ND/CC LEDs of these switches.
Item Function no. 㸯 㸴 Manual adjustment Switch Operating procedure ࣭Select adjustment items with the manual control section switches. section shows the adjustment item and value. ࣭Use the rotary encoder to adjust the items Adjustment value display for optimum values. &7/ 9$/8( ࣭When the &7/ 9$/8( switch is on, the adjustment value is displayed from -100 to +100.
Item Function Switch Operating procedure no. Manual adjustment ࣭ Press again the switch for the following display. (4)DETAIL KNEE reduction. BLK: Additional black component glare reduction. ࣭Press the switch for the following display.
Item Function no. Manual adjustment (3)NTSC(PAL) Operating procedure CRISP Switch '7/ ࣭Press again the switch for the following display. (4)NTSC(PAL) DTL KNEE 176& &5,63 + &5 9 &5 '7/ ࣭Press again the switch for the following display. 176& '7/ .1(( :+7 %/. (5)NTSC(PAL) BALANCE '7/ ࣭Press again the switch for the following display.
Item Function Switch Operating procedure no.
Item Function no.
Item Function Switch Operating procedure no. Manual adjustment Masking adjustment (1)Skintone SAT: Skintone saturation adjustment HUE: Skintone hue adjustment (2) R (Red) (3) Y-R (Yellow-Red) 0$6. ࣭Again press the switch for the following display. 0$6.
Function Manual adjustment (9) B-C (10) B (Blue) 0$6. % & 6$7 +8( 0$6. ࣭Again press the switch for the following display. (11) M-B (Magenta-Blue) ࣭Again press the switch for the following display. (12) M (Magenta) 0$6. % 6$7 +8( 0$6. ࣭Again press the switch for the following display. 0$6.
Item Function Switch Operating procedure no. Manual adjustment Shutter adjustment 6+877(5 ࠙Displayࠚ VAR: Variable adjust 1/59~1/1983 (1080i/60) 1/50~1/2008 (1080i/50) Set the upper shutter to variable mode when Variable adjustment.
Item Function Switch Operating procedure no. Manual adjustment (2)IRIS TRIM SPED: Adjusts the auto iris response speed. If response speed becomes fast then adjustment value will be big and adjustment value become small then response speed will be slow.
Item Function Switch Operating procedure no. Manual adjustment Black stretch % 675 ࠙Displayࠚ %/$&. 675(7&+ /(9/ adjustment LEVL: Black stretch level adjustment On/off control (1) DTL DTL KNEE SKIN GATE 6+,)7 ࠙Displayࠚ % 675 '7/ '7/.
Item Function no. Manual adjustment Switch Operating procedure ࣭Press again the switch for the following display. (5)SKINDTL- CH,IND &+ ̽ 6.,1'7/̽ ,1' % 675 CH:Select skintone detail channel (1,2,1+2) IND:Select skintone gate channel l (1,2) (6) ASPECT COMB FILTER MONO % 675 ࣭Press again the switch for the following display.
Item Function Switch Operating procedure no. Manual adjustment BLACK adjustment (1) BLACK Pedestal (RGB) adjustment (2) BLACK SETUP LEVEL 6+,)7 %/$&. Black setup level adjustment %/$&. %/$&.
Item Function no. Manual adjustment Switch Operating procedure Gamma adjustment (1) GAMMA Gamma (R, G, B) adjustment (2) PAINT - GAMMA *$00$ *$00$ (3) GAMMA TABLE ࠙Displayࠚ *$00$ 5 * % ࣭ Press again the switch for the following display.
Item Function no. Manual adjustment Knee/slope adjustment (1) KNEE Knee point (R, total. B) adjustment (2) SLOPE Slope (R, total, B) adjustment (3)WHITE CLIP White clip (total) adjustment (4)KNEE SAT Switch .1(( 6/23( ࠙Displayࠚ .1(( 5 727/ % .1(( 6/23( .
Item Function no. 㸯㸵 Gain and black adjust Switch 3$,17 (1$%/( ࣭Gain and black adjustment with *$,1 3$,17 (1$%/( switch on Adjustable by control ࣭Setting 3$,17 (1$%/( to off returns %/$&. Operating procedure black control to center detent position. * *$,1 & 7(03 Set to C.Temp to operate the G.Gain control as follows. Turn clockwise to raise blue and lower red gain. G.gain/C.
Item Function no. 㸰㸰 Lens extender Indication Switch ; Operating procedure ࣭Lights when lens extender X2 is on. ; ࣭Lights when lens extender X0.8 is on. 㸰㸱 TALLY CALL &$// ࣭R tally LED lights when &$// switch is pressed. ࣭Tally call from camera head and CCU: The R tally LED lights and the buzzer sounds.
Service information 32
Specifications Rating (1) Dimensions: 102 (W) x 370 (D) x 55 (H) mm (2) MASS: 1.
Specifications Rating (1) Dimensions: 102 (W) x 340 (D) x 55 (H) mm (2) MASS: 1.