User's Manual

this function, Windows will detect that the device is connected and it will

automatically launch the Add New Hardware Wizard. Please refer to “Audio

install manual” file on the CD for detailed install process.

Input Pin-Code

(*2)

- You can input the Pin-Code in advance.

- Press the ‘Pin-Code select Key’ once.

- You will see the digital ‘0’ is flashing.

- If you press the ‘Pin-Code select Key’ again, it will change to digital ‘1’

- If the number is what you want, then press the ‘Confirm Key’ once and the

number will not flash. Please press ‘Pin-Code select Key’ to select next

number you want.

- When last number is inputted ok, please press ‘Confirm Key’ again in order to

complete the ‘Input Pin-Code’ procedure.

- If any number is wrong or you want to update the Pin-Code, You must restart

the ‘Input Pin-Code’ procedure again.

Pair with Headset

(*2)

- Please let the headset to be in the pairing mode.

- Plug USB cable into the computer

(*3)

and you will see the Green LED flash

every 2 seconds.

- Press the ‘Pair Key’ 3 seconds continually, you will see the Green and Red

LED are flashing alternately.

- When pairing is completed, the device will enter into standby mode & the

Green LED will be flashing every 2 seconds.

(*3)

The pairing procedure can only be done in standby mode.

LED status

Standby mode Green LED will flash once in 2 seconds

Park mode Green LED will flash once in 2 seconds

Talk mode Green LED will flash twice in 1 second

Pair mode Green & Red LED will flash alternately

PAGE 1
this function, Windows will detect that the device is connected and it will automatically launch the Add New Hardware Wizard. Please refer to “Audio install manual” file on the CD for detailed install process. Input Pin-Code (*2) - You can input the Pin-Code in advance. - Press the ‘Pin-Code select Key’ once. - You will see the digital ‘0’ is flashing.
PAGE 2
HBU-001/HBU-001D Bluetooth USB dongle manual Features ò Embedded Audio Gateway profile (*2) ò User-friendly interface that can be used with Bluetooth enabled headset devices. ò Support pin-code input in order to pair with various Bluetooth headsets ò 100 meter working distance Front panel 1. Data/Audio mode select Key(*2) 2. Status LED 3. USB cable 4. Pin-Code select Key(*2) 5. Pair Key ( also as Confirm Key) (*2) 6.
PAGE 3
Select DATA mode Press the ‘Data/Audio mode select Key’ once, you will see the status LED turns OFF (When link succeeds, the LED will be flashing). If you press the ‘Data/Audio mode select Key’ again, it will change to Audio mode. Please refer to “BTW Installation Instructions” file on the CD for detailed install process. HBU-001 With Audio Specification Please refer to “HBU-001 With Audio Specification” file on the CD.