User's Manual

HBK-001

Bluetooth car kit manual

Features

ò Embedded Audio Gateway profile

ò Plug in existing mobile phone via 2.5 φ phone jack

ò User-friendly interface that can be used with Bluetooth enabled

headset devices.

ò Support DC output function for charger

ò 10 meter working distance

Front panel

1. Car kit power in plug

2. Status LED

3. Charger output plug

4. Audio cable

5. Holder eject

6. Pair key

Pair with Headset

1. Plug-in the car kit to the car cigar slot and you will see the green LED

flash per 2 seconds

(*1)

2. Please let car kit into the pairing mode.

3. You can press the ‘Pair Key’ 3 seconds continually.

You will see the green LED is flashing per 0.5 second then you can

release the press.

PAGE 1
HBK-001 Bluetooth car kit manual Features ò Embedded Audio Gateway profile ò Plug in existing mobile phone via 2.5 φ phone jack ò User-friendly interface that can be used with Bluetooth enabled headset devices. ò Support DC output function for charger ò 10 meter working distance Front panel 1. 2. 3. 4. 5. 6. Car kit power in plug Status LED Charger output plug Audio cable Holder eject Pair key Pair with Headset 1.
PAGE 2
4. When pair is finished (*2), the device will enter standby mode. The green LED is flashing per 2 seconds. (*1) Only in standby mode, you can do pair procedure. If you don’t sure which state is. You can plug-out and plug-in of car kit plug again and wait the green LED flash once per 2 seconds. This is standby mode now. (*2) ¡If green LED turn off 3~6 seconds, you need restart pair procedure again. ¡ Once pair is successful, you needn’t do pair procedure next time unless you change another headset.
PAGE 3
FCC Statement 1.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 2. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3.