Dynamic Terminal Ku 8X8 V2 Quick Start Installation Guide Document P/N: QSIG0003 Document Version: V.3 Creation Data: February 2022 Last update: April 1st, 2022 Proprietary Notice This document is the proprietary property of hiSky Ltd. Copying or otherwise distributing the information contained herein is a breach of confidentiality agreement and subject to legal action.
Introduction The Quick Start Guide provides basic information for installation, identification of connectors and visual indicators, as well as regulatory information for the hiSky IoT Dynamic Ku V2 Terminal. Product Description The IoT Dynamic Ku 8X8 V2 Terminal is a compact form-factor device that enables on-the-move satellite connectivity to sensors/smartphones / IoT gateways.
Part Status LED Description Off: Powered off Slow Flashing green: Searching for satellite (terminal initialization or tracking lost ). Fast Flashing green: registration process Solid Green: Service available (terminal locked/track and registered). Flashing Blue (every burst): Terminal transmit (toggle every halfsecond for 250 mil).
Overview of First Run Operation with the hiSky 360 App 1. Initial Login: a) Confirm Internet connectivity to your smartphone for the initial Login and software download steps. b) Download the hiSky App from iPhone App Store or Android Google Play Store. c) Click on the hiSky360 App icon. d) Click LOGIN on the main screen. e) Add the account credentials (username and password) related to your hiSky360 account. f) Choose the NMS connection and tap LOGIN. 2.
l) At the end of the update, the terminal will reboot. 3. Choose Satellite Parameters a) Connect your smartphone to the terminal WI-FI access point. b) Click on the GPS CONFIG on the hiSky main screen. c) Click on REFRESH and SAVE the location parameters. d) Return to the main screen and click on TERMINAL CONFIG. e) In the Satellite Parameters section, ensure that the correct beam number is being used. If not, select the relevant beam number. f) Click SAVE.
5. Connect the Satellite and the Terminal To establish connectivity between the satellite and the terminal, do the following: • Place the terminal on level ground or tripod mount. • Place the terminal in a clear line of sight between the terminal and the satellite. Any buildings, trees, people, or other objects in the path may interfere with connectivity. • Wait for the status LED to turn solid green. 6.
Troubleshooting Issue Workaround WI-FI connection cannot be established between the smartphone and the terminal. Make sure a WI-FI connection is available on the smartphone. Check for relevant integration instructions Terminal cannot establish satellite connectivity (Slow Flashing Green). Check the service plan status in the hiSky mobile app. Unsuccessful registration to hiSky mobile app. Internet connection is required for the initial Login.
Danger/Warning Symbol WARNING: This symbol means danger! You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents Waarschuwing: Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken.
¡Advertencia!: No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera. Varning!: id åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar. Operating Temperature and Airflow Warning WARNING: To prevent the unit from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature as defined in the Mechanical and Environmental Specifications table.
Varoitus: Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Attention: Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. Warnung: Lesen Sie die Installationsanweisungen, bevor Sie das System an die Stromquelle anschließen. Avvertenza: Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore. Advarsel: Les installasjonsinstruksjonene før systemet kobles til strømkilden.
to use the equipment may be limited by FCC regulations, and the user may be required to correct any interference to radio or television communications at their own expense. Safety TUV Rheinland of North America is a Nationally Recognized Testing Laboratory (NRTL) in the United States and is accredited by the Standards Council of Canada to test and certify products to Canadian National Standards. The Dynamic Terminal Ku 8X8 V2 complies with both U.S. and Canadian National Standards on Safety.