2.0 Channel Soundbar Home Theater System Model: HS205G User Manual Before using the soundbar, please read this manual thoroughly and retain it for future reference. RSAG3.834.
Connect Power.............................................................................................................................................13 Contents Important Safety Instructions Basic Operation 2 Safety............................................................................................................................................................................................2 Warning............................................................................................
2 Keep these instructions – The safety and operating instructions should be retained for future reference. 3 Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4 Follow all instructions – All operating and usage instructions should be followed. 5 Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like. 6 Clean only with a dry cloth.
11 Only use attachments/accessories specified by the manufacturer. 20 Batteries should be recycled or disposed of as per state and local guidelines. 12 21 The use of apparatus in moderate or tropical climates. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• • • • Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth. When removing the power plug from the wall outlet, always pull directly on the plug, never yank on the cord. Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. The rating label is pasted on the bottom or back of the equipment. Correct Disposal of this product.
EN Roku TV Ready and the Roku TV Ready logo are trademarks of Roku, Inc. FCC INFORMATION (for US customers) Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double - D symbol are trademarks of Dolby Laboratories Licensing Corporation.
FR - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. • This device complies with Part 15 of the FCC Rules.
récepteur est branché. - Consulter le revendeur ou un technicien radio/TV expérimenté. • Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : Package Contents • Main Unit (1) ce dispositif ne peut pas causer d’interférences nuisibles et • Remote Control / AAA Batteries(x2) (2) cet appareil doit accepte r toute inter férence reçue, y compris les interférences qui peuvent causer un mauvais fonctionnement.
Product Diagram Main Unit 3 Screws Install the wall mounting screws into the wall mount of the unit. 1 Remote Control Sensor Receive signal from the remote control. 2 LED Indicators • • • • • Red : In STANDBY mode. Orange : In Optical mode. Blue : In Bluetooth mode. White : In HDMI ARC mode. Green: In USB mode. * You can quickly check the above LED Indicators mode on the back label of the remote control. 4 (ON/OFF) Button Switch the unit between ON and Standby mode.
Remote Control 1 Switch the unit between ON and STANDBY mode. 2 MUSIC Switch to MUSIC EQ effect. 3 VOL+/VOLIncrease/decrease the volume level. 4 SURR Adjust the surround ON/OFF. 5 (Source) Select the play mode. 6 (MUTE) Mute or resume the sound. 7 NEWS Switch to NEWS EQ effect. 8 / Skip to previous/next track in BT/USB mode. 7 DC Socket Connect to the power adapter. 8 HDMI ARC Socket Connect to a TV via HDMI cable. 9 OPTICAL Socket Connect to an optical audio output on the TV.
9 / Play/pause/resume playback in BT/USB mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device. 10 NIGHT Switch to NIGHT EQ effect. 11 MOVIE Switch to MOVIE EQ effect. 12 BASS+/Increase/decrease the bass level. Replace the Remote Control Battery 1 Press and slide the back cover to open the battery compartment of the remote control. 2 Insert two AAA size batteries (included).
• • • Do not use any batteries other than those specified. Do not mix new batteries with old ones. Never recharge a battery unless it is confirmed to be a rechargeable type. - Placement and Mounting Placement A If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the A B TV screen. B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.
Tips: Connections - Connect to HDMI (ARC) Socket Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On. - Your Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable. The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, please refer to your TV owner’s manual. - Only HDMI 1.
Tip: Basic Operation • While in OPTICAL or HDMI ARC mode, if there’s no sound output from the unit, you may need to activate PCM Signal output on your source device (eg. TV, DVD or Blu-ray player). Standby/ON When you first connect the main unit to the mains socket, the main unit will be in Standby mode. Connect Power Risk of product damage! - • Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit and the power adapter.
Automatic Power Off Function listening. Note: While adjusting the volume, the status LED indicator will flash once. When the volume has hit maximum/minimum value level, the status LED indicator will flash quickly. The unit automatically turns to STANDBY mode after about 15 minutes if the TV or the external unit is disconnected, switched off. • To switch the unit off completely, remove the mains plug from the mains socket. • Please turn the unit off completely to save energy when not in use.
Indicator light function Features Automatic Standby On Automatic Standby Off Auto Wake Mode On Auto Wake Mode Off Volume limit Display Green-Green-Green, quickly Green-Green-Green, slowly White-White-Green-Green White-White-Red-Red Operation Optical mode, "Prev""Prev"-"Next"-"Next" Soundbar: "Source" + "Vol+" The light flashes 3 times Adjust volume Bluetooth pairing Red-Blue-Red-Blue....... In Bluetooth Mode, Press and hold the Play button Failed to play Red-Green-Red-Green.......
Bluetooth Operation OPTICAL / HDMI ARC Operation 1 Ensure that the unit is connected to the TV or audio device. Pair Bluetooth-enabled Devices 2 Press the button repeatedly on the unit or on the remote control to select the OPTICAL, HDMI ARC mode. The first time you connect your bluetooth device to this player, you need to pair your device to this player. 3 Operate your audio device directly for playback features. Note: 4 Press the VOL +/– button to adjust the volume to your desired level.
If you cannot find the unit, press and hold the / button on the remote control to be searchable. The system has entered pairing mode. You will hear audio prompt from the unit and the Bluetooth indicator will flash quickly. • 3 Select “Hisense HS205G” in the pairing list. After audio prompt, the system is successfully connected and the Bluetooth indicator will light up solidly.
File Format Type Compatibility list USB Operation Extension 1 Insert the USB device. *.mp3 2 Press the button repeatedly on the unit or press the USB button on the remote control to select USB mode. *.wma 3 During playback: *.aac / button on the remote control. - To pause or resume play, press the - To skip to the previous/next file, press the control. / buttons on the remote Codec MPEG-1 Layer1/2/3 MPEG-2 Layer1/2/3 MPEG-2.
• • • Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. • No power • • • • Ensure that the AC cord of the apparatus is properly connected . Ensure that there is power at the AC outlet. Press standby button to turn the unit on. Ensure that the DC cable of the power Adapter is properly connected.
Specifications Model Name Wireless Specification HS205G Bluetooth Version V 5.0 AC100-240V ~ 50/60Hz Frequency bands 2402 MHz ~ 2480 MHz DC 24V/2A Max Audio Power General Power Supply Standby Power ≤ 0.5 W USB port for playback USB Compatibility USB Playback support / file formats 5V 500mA Hi-Speed USB (2.0) / FAT32 32G (max) , MP3 Remote Control Distance/Angle 6m / 30° 34.6 x 2.2 x 3.5inches Battery type AAA (1.5V X 2) Dimension (WxHxD) Total 120W (880 x 56 x 88 mm) Net weight 3.
Format Function Optical HDMI ARC LPCM 2ch LPCM 5.1ch LPCM 7.1ch Dolby Digital Plus × × × Dolby Digital DTS : Supported format. × : Unsupported format.
HS205G