Contents Declaration....................................................................................2 Important Safety Precautions......................................................3 Disposal of Used Electrical & Electronic Equipment...............................................3 Warning...................................................................................................................3 Safeguards.........................................................................................
Declaration Any content and service accessed through this device, while only intended for individual non-commercial use, shall be the property of the applicable third party and subject to protection by regulations and laws on copyright, patent, trademark and other intellectual property rights.
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package. In no case the user is allowed to operate inside the TV set.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 12. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 13. Object and Liquid Entry Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV. 14.
Setting Up Connection Instructions NOTE Some devices such as a PVR or DVD player require a “Component/YPBPR” signal to be set to output in the devices settings. (Please consult your device user manual for instructions.) Connecting an Aerial To view television channels correctly, a signal must be received by the set from the following source: Connecting External A/V Devices • An outdoor VHF/UHF antenna. Connect a Video RCA cable to an appropriate external A/ V device such as a VCR, DVD or Camcorder.
Using the Remote Control Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. 1 Gently push and slide 2 Insert the batteries 3 Gently push and slide NOTES Product image is only for reference, actual product may vary in appearance.
Using the Remote Control Viewing the Remote Control Power button Remote sensing Window Available source selection Switch to DTV Radio program Analog / Digital TV Start video recorder Zoom image Mute the sound Set the sleep time Select USB-Digital Media player mode Select Audio languages Mono/Stereo operation,Audio select button Display the subtitle content of the signal Fast access to your saved favorite programs Red, Green, Yellow and Blue are used in media mode Exit: Exit all menu display Display
Using the Remote Control Turning your TV on and off Press the [Zoom] button to change the screen aspect To turn your TV on: Connect the TV to an AC power outlet and an external antenna, then turn on the power via switch located below the front right hand side of unit. ratio among Auto, 4:3, Full, Zoom1, Zoom2. NOTE The option of aspect is vary with different source. • Turning off to standby mode: Press [ STANDBY ] for a few seconds to turn on the TV or put the TV in standby mode.
Using the Remote Control NOTE An USB storage device must be attached to the television for recording purposes. Please refer to the PVR section of this manual. • EPG functions The Remind function will change automatically channels at the correct time so that you do not miss programs of interest. Select the program from the EPG and press the [BLUE] button “Reminder” to setup this feature.
Basic Features Turning the TV On for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. Switch on at the bottom of the TV. 3. The first time you turn the TV on, it will go straight into the Installation Guide. It will assist you to specify the OSD Language, Mode Setting, Country, Tuner Type, Auto Scan, LCN, Auto Channel Update. NOTE • Always disconnect the TV from the mains socket when it is not in use for a long period of time.
Basic Features To Use the Menu 1. Press the [Menu] button to open the main Menu. 2. Press the [◄/►] buttons to select a Menu option, then press the [OK] buttons to enter the Menu. 3. In each Menu, you can: Picture Mode Brightness Contrast Sharpness Saturation Hue Color Temp Aspect Ratio ▲ Press the [▲/ ] buttons to select an item, Press the [◄/►] buttons to adjust the value, Press the [OK] buttons to enter the subMenu, Press the [Menu] buttons to return to the previous Menu.
Basic Features Screen Mode Adjust HDMI display mode. You can select Auto, Video or PC. NR Reduce the noise level of the connected devices. You could select one of the following options: Off, Weak, Medium, Strong. Dynamic Contrast Adjust the dynamic contrast feature of the screen: Off, Weak, Medium, Strong. If this option is Off, the TV will automatically adjust the screen contrast. Using the Sound Menu The sound setting allows the user to optimize the output audio sounds of the TV.
Basic Features Using the Channel Menu Tuner Type Auto Scan Manual Scan Auto Channel Update Channel Edit Favorite Manager Signal information Move Channel Antenna Off OK Select Menu Return Exit Exit When the Reception Type is set to Antenna Tuner Type Select a preset Tuner Type: Antenna. Auto Scan Press the [OK] button, then press the [▲/▼/◄/►] buttons to set the Country and Mode, select Start to scan channels. Select a preset Manual Scan: Digital Manual Scan / Analog Manual Scan.
Basic Features Signal information Display detail signal informations. (DTV mode) When the Reception Type is set to Cable Tuner Type Select a preset Tuner Type: Cable. Auto Scan Press the [OK] button, then press the [▲/▼/◄/►] buttons to set the Country, Mode, Scan Type, Network ID, Frequency and Symbol Rate, select Start to scan channels. Select a preset Manual Scan: Digital Manual Scan / Analog Manual Scan. Allows you to make manual fine tuning adjustments of the channel under DTV mode.
Basic Features Using the Lock System Menu Enter Password Enable Channel Locks Parental Rating Lock Keypad New Password Clear Lock Hotel Mode Lock System Move ---Off None Off ---- OK Select Menu Return Exit Exit Enter Password Prevent unauthorized users, such as children, from watching unsuitable programme. When you first use this function, the default password is [0000]. Once you input this password, you can continue to the next operation. You can change password in the New Password submenu..
Basic Features OSD Language Select a preset Menu Language mode: English / Deutsch / Francais…… Audio Languages Allows you to select your desired audio languages. Press the [◄/►] buttons to select the Audio Primary / Secondary language. Press the [▼] button and then press the [▲/▼/◄/►] buttons to select your desired audio languages. Subtitle Allows you to select your desired subtitle language. Press the [◄/►] buttons to select the Subtitle Primary / Secondary language or Hearing Impaired.
Basic Features NOTE HDMI Cables must be used to connect HDMI CEC compatible devices to your TV. The connected device’s HDMI CEC function must be turned on. If you connect One HDMI devcice that is not a HDMI CEC compatible,all the CEC Control function may not work. HDMI CEC Control Depending on the connected HDMI device,the CEC control function may not work.
Basic Features 5.Press the [▲/Move Up] button to move item. File Manager 6.Press the [▼/Move Down] button to move item. 7.Press [OK/Select] button to play the selected file. 8.Press the [Menu/Return] button to return to the previous menu. 9.Press the [Exit] button to exit. Device List 1.Press the [RED/Format] button to format the selected USB. 2.Press the [▲/Move Up] and [▼/Move Down] buttons to move item. 3.Press the [OK/Select] button to play the selected file. PVR Settings 4.
Basic Features Scheduled Record -Group Scheduled Record PVR Settings 1.Press the [▲/Move Up] and [▼/Move Down] buttons to move item . 2.Press the [◄/Adjust] and [►/Adjust] buttons to adjust the selected item. 3.Press the [OK/Select] button to set following items: · Channel : enter new menu to select the channel to record. · Start Time date : open new menu to set the start time. · End Time date : open new menu to set end time. · Save : save setting and return to the previous menu. 4.
Digital Media Player Digital Media Player(Media) Media content control function buttons A group of dedicated buttons provide convenient control of multimedia files. Fast backward Be sure to insert the USB disk/mobile hard disk with standard USB port. Play/Pause There are two options to start the Media: Press the [Source] button to display the Source menu, press the [▲/▼] buttons to enter the MEDIA source, then press the [OK] button to confirm.
Digital Media Player 6. Press the [BLUE] button to display/exit the Quick Menu: 8. Press the [BLUE] button to display/exit the Quick Menu: Press the [▲/▼] buttons to select the options in the menu. Press the [▲/▼] buttons to select the options in the menu. Press the [◄/►] buttons to select the settings. Press the [◄/►] buttons to select the settings. 7. Press the [Exit] button to exit the music playback interface.
Other Information TroubleShooting If the TV does not operate as usual or appears to be faulty please read carefully this section. Many operational issues can be resolved by users. It is also advisable to unplug the TV from the AC socket on the wall for 60 seconds or more, then reconnect and start again. This simple procedure helps in restoring stable conditions for electric circuits and firmware of the unit. Please contact Manufacturer Customer Care if the problem is unresolved or you have other concerns.
Other Information Technical Specifications Colour System PAL SECAM Television System PAL\SECAM, B/G, D/K, DVB-T+C Environmental Conditions Temperature: 5°C - 45°C Humidity: 20% - 80% RH Atmospheric pressure: 86 kPa - 106 kPa Component Mode 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz VGA Mode 640×480, 800×600, 1024×768, 1280×1024 (Not available for 32'' model) , 60Hz HDMI Mode 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz
1150533
