installing Batteries in the Remote Control = Change the batteries 1. Slide the back cover to open the battery compartment of the remotes control. 2. insert two AAA size batteries. Make sure to match the and { | sends of the batteries with the and { ~ } ends indicated in the battery compartment. 3. Close the battery compartment cover. The remote control requires: © Gently push and slide ©) insert the batteries €} Gently push and slide # Number of Batteries: 2 & Type: ARR © Voltages: 1.5Ves .
Making connections % Hack the jacks for position and type before making any connections. Loos connections can result in image or color problems. Make sure that all connections sre fight and secures. % Mot all AV devices have the ability to connect to a TV, please refer to the user manual of your AN device for compatibility and connections procedures. 4% Always unplug the power cord when connecting dermal equipment. =» Connecting an antenna, cable or cable/satellite box 1.
= Connecting an AV Device with Component Cable 1. Use a component cables to connect the textual AY devise's component output jacks to the TV's YPP, Jacks. Use an audio cable to connect the fieldsman AV device's component audio Jacks fo the TV's AUDIO {L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Bale ct the corresponding sources from tha TV. TV JACK EXTERNAL DEVICES Fiona) 3 Sut cable Herb As. rol induced] cgi E1E EH | Ge Pyloric | Comport Cable | Punchy .
» Connecting an Audio Receiver with Audio cable 1. Use an audio cable to connect the AV device's digital audio in jack to the TV'a DIGITAL OUTPUT jack. Or use an RCA Ye cable mini fo L/R phonon not provided) to connect analog sound system ta the TV's CLAUDIO OUT jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Slacks the corresponding source from the TV.
Turning Your TV On or Off To tum your TV on or off (standby mats): 1. Plug the power cons into an AC power outlet. 2. Press [POWER] button. Your TY tums on. 3. Press [POWER] bunion again to tum off your TV, When yeu tum off your TV, it gods into standby mode. When your TV is in standby mods, iris still receiving prows. To completely disconnect power, unplug the power cord. if your TV does not receive an input signal for several minutes, it automatically gods info standby mode.
Selecting the Input Source The first time you tum on your TV, you must select the TV signal source. Your TV stores this information, go you do not need to change the TV signal source unless it changes. For sample, you sangs from an outside antenna to cable TV. To select the video Input source: 1. Tum on your TV, then press [INPUT] bunion on the resole or ort the TV. The Input sources menu opens. 2. Press button to highlight the input source, then press [ENTER] button. Changing Channels / Volume 1.
Te Use the Menu Press [MEN] to open the main menu. Cross fo select a menu option, then press [B/ ENTER] bunion: ia enter the menu. 3 in each menu, you can: Crass [47%] 10 select an item, Press [4/p] to adjust the value, or Press /ENTER] io enter the submerse, Press [MENU] to back the previous menu. 4 Press [EXIT] to exit the mend. » FR Rr The menus In the user manual may vary slightly from the actual screen. Using the Picture Menu Bla Re Cr Wea i a You can adjust: Picture Mods Adjust the Picture Mode.
Using the Audio Menu Vou can adjust: Sound Soda Select the Sound Mode: Standard, Theater, music, Speech or Custom. Balance Adjust the volume of the left and right speakers, Equalizer Soften or chances the sound at specific fragrance points. Auto Volumes Control Automatically adjusts volume fo a consistent level; attenuates loud passages. TY Speakers ~ Selects where to play TV audio.