User Manual Startel 9000X(V3.
User Manual Startel 9000X(V3.3) CONTENTS 1. General Introduction ..................................................................................................................1 2. Important Information ................................................................................................................2 2.1 Optimal Phone Performance..........................................................................................2 2.2 Care and Service ................................................
User Manual Startel 9000X(V3.3) 9.6 Time Format....................................................................................................................18 9.7 Carrier Info......................................................................................................................19 10. Security setting.......................................................................................................................19 10.1 Forbidden Outgoing Calls....................................
User Manual Startel 9000X(V3.3) 1. General Introduction Startel 9000X, one Fixed Wireless Phone which is based on Qualcomm’s MSM6000 RF CMOS chipset, can support all kinds of CDMA 1X 800MHz networks. Its practicality and high integration reduces the cost and make it easy to come to the market. Congratulations on your purchase of this Phone, because it has greatly enhanced voice quality and can provide various advanced features.
User Manual Startel 9000X(V3.3) 2. Important Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain of moisture. Do not use this product near swimming pools or other bodies of water. Important Read this information before installing or operating this product 2.1 Optimal Phone Performance z z z z z z z Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) to the antenna.
User Manual z z z z z Startel 9000X(V3.3) installation or service can be dangerous and may invalidate the warranty. Do not use the unit in designated “no cellular phone use” area. Avoid exposure to high temperature or humidity. Avoid wetting the unit with any liquid. If the unit gets wet, turn the power off immediately and remove the backup batteries and AC power supply. If the unit is inoperable, then return to the service agent for service. Avoid shock or impact on the unit.
User Manual z z z z z z z z z z z z z z z Startel 9000X(V3.3) your authorized dealer for help. It may cause fire, electric shock and breakdown. Do not drop, knock or shake it. Rough handling can break internal circuit boards. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth that has been slightly dampened in a mild soap and water solution. Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.
User Manual Startel 9000X(V3.3) 3. Introduction 3.1 Front view of the Phone 3.2 LCD Display The LCD shows icons on the top of the LCD screen. Different icons appear based on the phone’s operating mode. : Indicates the signal strength in the service area. : Displayed when the CDMA service is enabled : Displayed when wake up alarm time is set. : : Indicates charged battery level. : In use. : Displayed when a text message is received. : Indicates no network in the area.
User Manual Startel 9000X(V3.3) Fixed Wireless Phone. STEP1. Check Components z Fixed Wireless Phone is supplied with the following standard unit and accessories: 1. 2. 3. 4. 5. z STARTEL 9000X Main Unit with Handset Dipole Antenna Chargeable Battery Group User Manual AC/DC Power Adapter Please make sure that these components are present before you begin the unit installation. If components are missing or damaged, contact the store where you purchased the unit immediately. STEP2.
User Manual Startel 9000X(V3.3) signal as shown in the figure in the next page. STEP4 Check the LCD Display z After you follow the installation instruction STEP3, please check the LCD for normal operation z If you do not see the status of service, please repeat the instruction of STEP3. And confirm Fixed Wireless Phone to get the proper signal strength from service operator system. The adapter type (with power cord) may be different according to different country. 4. Basic Operation 4.
User Manual Startel 9000X(V3.3) first number is selected and dialed out. 6. To disconnect the call, replace the handset or press “hands free” button. z To enter English character. Select [Multitap], and press once a keypad to enter the first letter labeled in the keypad, twice to enter the second letter and 3 times to enter the third letter. EX To enter “c”, Press dial button 2 labeled “ABC” 3 times to enter “c”, After 2 seconds entering a character, the cursor is moved to the next position automatically.
User Manual Startel 9000X(V3.3) z Correcting dialing mistakes 1. Press “Clear” button shortly to erase the most recent digit. 2. Press and hold “Clear” button for at least one second to erase all the entered digits. z If the phone is locked, enter the lock Code. z If the call did not go through, press the hook switch and dial again. z Flashing/Hook Switch 1. While in the middle of a call, pressing the hook switch for less than 1 second will be treated as a flash.
User Manual Startel 9000X(V3.3) 5.1 Find 5.1.1 Find by name You can find a phone number by name in the contacts 1. 2. 3. 4. 5. 6. Press [MENU]. Press [Contacts]->[Find] ->[Name]to enter the find menu. Input the name that you want to look for and press [Find].
User Manual Startel 9000X(V3.3) 5.2 Add Add to Phone You can add the new to the contacts. 1. Press [MENU]. 2. Press [Contacts]->[Add]->[Add to Phone] to enter the add new menu. 3. Press “Up/Down” button to select the contents types that you want to add which include Phone, Email, Address and Web Page. 4. Input the materials, when inputting a phone number, you can save the extension number following “P”. Press [NEXT] and input the name, and then press [NEXT] to save. 5.
User Manual Startel 9000X(V3.3) 5.5 Memory state You can check memory state of contacts. 1. Press [MENU]. 2. Press [Contacts]->[memory state ] enter memory state menu. 6. Recent Calls 6.1 missed calls, incoming calls and outgoing calls There are three items including missed calls, incoming calls and outgoing calls. The operations under every item are similar. 1. 2. Press [MENU]. Press [Recent Calls]->[Missed calls] or [Incoming Calls] or [Outgoing Calls] to enter the different items. 3. 4.
User Manual Startel 9000X(V3.3) 2. Press [Recent Calls]->[Call Timers]->[Previous Call Time],[Outgoing Calls], [Incoming Calls] and [All Calls] to enter the corresponding menus. 3. Press “Left/Right” button to select the settings. Press [Reset] to set the timer to zero. 4. Press [OK] to save and exit. 7. SMS (Short Message Service) SMS is available when your phone is turned on. Using Message button allows you to access messages for viewing on the LCD screen or to send a message.
User Manual Startel 9000X(V3.3) 1. Press [Messages]. 2. Press “Up/Down” to select [Create Message] 3. Input the phone number you want to send or select it from the contacts and press [Continue] to enter the message edit box, and then input the content you want to send and press [Continue]. You can select any input method you want. 4. There are two options as Send and Save, you can select to send or save this message to outbox by press [Send] or [Save]. 5.
User Manual Startel 9000X(V3.3) menu. 2. Press “Up/Down” to select the alert mode you want. There are three modes including None, Alert Once and Alert &Remind. 3. None means no alert when a new message incoming; Alert Once means only alert once when a new message incoming. Alert &Remind means alert and remind when a new message incoming. 7.4.2 Auto Erase Inbox You can select auto or not-auto erase inbox 1.Press [Messages]->[Message Setting]->[Auto Erase Inbox] to enter the setting menu. 2.
User Manual Startel 9000X(V3.3) The Key Beep volume when you press a key can be adjusted. 1. Press [MENU]. 2. Press [Sound Setting]->[Volume]->[Key Beep] to enter the Key volume adjusting menu 3. Press “Up/Down” button to adjust key beep volume. 4. Press “SELECT”. 8.2 Ringer Type You can select the various ringer types. 1. Press [MENU]. 2. Press[Sound Setting]->[Ringer Type] to enter the Ringer type adjusting menu 3. Press “Up/Down” button to adjust ringer volume. There are 10 different ringer types. 4.
User Manual Startel 9000X(V3.3) You can enable or disable the service alert. 1. Press [MENU]. 2. Press [Sound Setting]-> [Alert]->[Service] to enter the service menu. 3. Press “Up/Down” button to select the modes. There are 2 different modes as Enable and Disable.. 4. Press “SELECT” to save and exit. 8.4.3 Minute Alert You can enable or disable the minute alert. 1. Press [MENU] in on-hook state. 2. Press [Sound Setting]-> [Alert]->[Minute Alert] to enter the minute alert menu. 3.
User Manual Startel 9000X(V3.3) 9.3 Language You can select the language. 1. Press [MENU]. 2. Press[Display Setting]->[Language] to enter the language menu 3. Press “Up/Down” button to select the language. There are 2 different languages as Spanish and English. 4. Press “OK” to save and exit. 9.4 Contrast You can adjust the contrast 1. 2. 3. 4. Press [MENU]. Press [Display Setting]->[Contrast] to enter the contrast adjust menu Press “Left/Right” button to adjust the contrast.
User Manual Startel 9000X(V3.3) 9.7 Carrier Info. You can enable or disable Carrier Information. 1. Press [MENU]. 2. Press [Display Setting]->[Carrier Info.] to enter the Carrier Info. menu 10. Security setting 10.1 Forbidden Outgoing Calls You can set the forbidden outgoing calls 1. Press [MENU]. 2. Press [Security Settings]->[Forbidden outgoing calls] to enter the setting menu. 3. Input the password and press “select”. 4. Press “Up/Down” button to select [On] or [Cancel]. 10.
User Manual Startel 9000X(V3.3) 10.4 Modify Keyboard Unlock You can change the keyboard unlock password. 1. Press [MENU]. 2. Press [Security Settings]->[Modify Keyboard unlock] to enter the keyboard unlock menu. 3. Input the old password and press “select”, and then input new password. 4. Press “SELECT” to save and exit. 10.5 Modify Second Password You can modify the second password. 1. 2. Press [MENU]. Press [Security Settings]->[Modify Second Password] to enter the Modify Second Password menu. 3. 4.
User Manual Startel 9000X(V3.3) 11.2 Call Forwarding You can set this function to forward the call to the third one when talking. 1. 2. 3. Press [MENU] in off-hook or talking state. Press [Supp. Services]->[Call Forwarding] to enter the Call Forwarding menu Press “Left/Right” button to select the call-forwarding mode. There are 6 different call forwarding modes as All, Busy, No Answer, Default, Cancel all and Number. 4. Press “SELECT” to save and exit. 12.
User Manual Startel 9000X(V3.3) 13. Beside Functions 13.1 Redial Pick up the handset or press “hands free” button and “RDL” button to redial last outgoing number. 13.2 Emergency Call Even if phone is in no service state, it is possible to call of Emergency number. 1. 2. 3. 4. 5. Pick up the handset or press “hands free” button. Enter the Emergency number. Looking for Emergency Service. Calling to Emergency. The call is connected and you can start conversation. 6.
User Manual Startel 9000X(V3.3) 14.
User Manual Startel 9000X(V3.
User Manual Startel 9000X(V3.3) 20s 30s Banner English Language Spanish Contrast Large icons Menu format Small icons AM/PM Time format 24HR Carrier info On Security setting Forbidden outgoing calls Enter password Phone reset Enter password PIN check PIN setting Cancel On Cancel On Off PIN change Modify Keyboard unlock Modify second password Fast charge Charge type Slow charge Activate Call waiting Deactivate Cancel Activate All Deactivate Cancel Activate Busy Deactivate Cancel Supp.
User Manual Startel 9000X(V3.3) Alarm View day View month Add event Scheduler Set work hours Options Auto delete Default alarm 15. General Information z Main Unit Item z Description Tx Frequency 824MHz-849MHz Rx Frequency 869MHz-894MHz Channel Bandwidth 1.
User Manual Startel 9000X(V3.3) Note! 1. Network environment, setting of phone, playing music will reduce the standby time. 2. The performance of the battery will change according to the charging status, environment temperature and the current radio wave. 3. For the first time ,battery is should be charged, by slow charge mode. 4. Please Charging the battery in normal temperature. 5. Suggest you should charge the batteries within 6 months at least. 16.