User's Manual

ManualsBrandsHisense Communication ManualsElectronicsBT/Wi-Fi Module

The user manual of TV’s WIFI、Bluetooth module

1. The product description

The user can achieve TV connection WIFI net and Bluetooth, through this module

2. Basic parameters

Feature Description Feature Description

Model

MW503

ProductName

WiFi 11a/b/g/n/ac 2T2R and BT5.0 Model

MajorChipset

RealtekRTL8822CU-CG

WLAN Standard

IEEE 802.11a/b/g/n/ac

BT Standard

BT2.1/3.0/4.0/5.0

WLAN Frequency Range

2.4GHz~2.4835GHz,5.0~5.8GHz

BT Frequency Range

2402MHz~2480MHz

Spread Spectrum

IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum)

IEEE802.11a/g/n/ac: OFDM (Orthogonal Frequency Division

Multiplexing)

Modulation Method

DSSS/DBPSK/DQPSK/16-QAM/ 64-QAM/256QAM

Data Transfer Rate

1,2,5.5,6,11,12,18,22,24,30,36,48,54,60, 90,120 and maximum of 867Mbps

Antenna Reference

Internal Printed ANT

Interface

USB2.0

SupplyVoltage

3.3V

0.2V

Dimension

3.15mm

Operating Temperature

-10°C to 70°C

Storage Temperature

-40°C to 85°C

3. The display method of Model approved code

In the factory，the model approve code is pasted on the back shell in a label.

4. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and if not installed and used in accordance with the instructions may cause harmful interference to

radio communications. However there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures：

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

5. Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it

also complies with Part 15 of FCC RF Rules. This equipment should be installed and operated with minimum

distance of 20 in (50cm)between the radiator and yourbody. This transmitter must not be co-located or

Summary of content (2 pages)

PAGE 1
The user manual of TV’s WIFI、Bluetooth module 1. The product description The user can achieve TV connection WIFI net and Bluetooth, through this module 2. Basic parameters Feature Description Feature Description Model MW503 MajorChipset RealtekRTL8822CU-CG ProductName WLAN Standard BT Standard WLAN Frequency Range BT Frequency Range Spread Spectrum Modulation Method Data Transfer Rate Antenna Reference Interface SupplyVoltage Dimension Operating Temperature 3. 4.
PAGE 2
operated in conjunction with any other antenna or transmitter CAUTION: To comply with the limits of the Class B digital device pursuant to Part 15 of the FCC Rules, this device is compliant with Class B limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may results in interference to radio or reception MODIFICATION To assure continued compliance, Any changes or modifications not expressly approved by the grantee of this 5.