ENGLISH English WiFi Instruction IMPORTANT: For successful operation, please read these requirements carefully before operation and store them in a safe place for later reference.
ENGLISH English Contents 1 2 3 4 5 6 7 8 WiFi Module Specifiction Smart Phone Requirements Percautions Technical Solution How to install WiFi Module How to register an account How to pair with device How to delete device 1 WiFi Module Specifiction WiFi Module Model No. AEH-W4F1 Transmission frequency 2412MHz-2462MHz ≤16.
ENGLISH English 3 Percautions Smart phone installed with Application. Not all of Android and IOS system are compatible with APP. We will not be responsible for any issue as a result of the incompatibility. A 2.4GHz wireless router which connects internet. For wireless router, WPA-PSK/WPA2-PSK encryption is recommended. Due to dynamic network connectivity request may time out.In this event,re-run the network.
ENGLISH English Technical Solution 5 How to install WiFi module For air conditioner Remove screw 1)Open air conditioner panel, and use tools to dismantle the terminal cover; — 3 —
Tighten WiFi module by screw 2)Fix WiFi module with tools, and connect the wire terminals of the module and of the internal machine Fix terminal cover 3)Fix the terminal cover with tools, and then WiFi module installation is finished. Note:Please refer to actual product for specific installation method. This instruction is only served as reference.
After installing the application,enter the application by clicking the desktop Icon. Select "Join now", input the information in the list and then click the "Join now". The system will send a registration code to the user’s registered e-mailbox, the user then submits the code and activates the account. Then the user can sign in the applicaiton. 7 How to pair with device Before pairing your device, please make sure your smartphone is connected to the Internet through a wireless router.
English For Android system Device setup Step 1 of 3: Select the device you wish to connect Guide Scaning Hi-Smart-XXXX 1 In “Home”,click the lower right corner “+” Next 2 select the device you wish to connect, then select “Next” — 6 —
ENGLISH English Device setup Step 2 of 3: Select your network Scaning Myhome Lovefamily Device setup Step 3 of 3: Enter your network password Password Add the new device Next 3 Select your wireless network in your house, then select “Next” 4Input the network password,then click “Add the new device”, waiting for pairing to complete — 7 —
English For IOS system Back Device setup Guide Step 1 of 3: Select the device you wish to Settings Air plane Mode WLAN Lovefamily Blutooth Off Cellular Choose Device Notifications Next Control Center 1 Select “Choose Device”, application will jump to “Settings” Do Not Disturb General Display & Brightness 2 Select “WLAN” — 8 —
English Settings WLAN WLAN Hi-Smart -XXXX captive.apple.
ENGLISH English Back Device setup Step 2 of 3: Scaning Myhome Lovefamily Back Device setup Step 3 of 3: Enter your network password password Connect And Register Next 3 Select your wireless network in your house, then select “Next” 4Input the network password,then click “Connect And Register”, waiting for pairing to complete — 10 —
Device name Delete English 8 How to delete device To delete any device, select the device which needs to be deleted and slide the selector to the left side, as shown in the picture. For android users, just press the screen for 2 seconds on the selected device to delete it. Note: The above pictures may change in application, please take the pictures in application as the standard Version No.
AEH-W4F1 WIFI Module Manual 1. General Description The wireless module complies with IEEE 802.11 b/g/n standard and it can achieve up to a speed of 72.2Mbps with single stream in 802.11n draft 7.0, 54Mbps as specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. This compact module is a total solution for a combination of Wi-Fi 802.11b/g/n technologies with Microcontroller Processor. The module is specifically developed for embedded system devices. 2.
2.3 Interface ◆ Interface ■ 1.25mm pitch connector ◆ Pin definition 4 3 2 1 Pin number Pin name Pin description 1 RS485A+ Communication line positive 2 RS485B- Communication line negative 3 GND Ground pad 4 5V 5.0V Power 3. WiFi RF Specification RF Specification Feature Description Feature Description WLAN Standard IEEE 802.11b/g/n(HT20), WiFi compliant Frequency Range 2.412GHz~2.462GHz Number of Channels CH1~CH11 for FCC and ICES, Shield 12,13 Channels with Software.
4. Mechanical Specifications PCB Assembly Dimension: ◆ Dimension (L x W) : L:40.0mm*W:20.
5. Requirement of FCC KDB 996369 D03 for module certification: 5.1 List of applicable FCC rules and Canada rules: The module complies with FCC Part 15.247, and Canada RSS-247. 5.2 Summarize the specific operational use conditions: The module has been certified for Fix/Mobile applications. The host product operating conditions must be such that there is a minimum separation distance of 20 cm (or possibly greater than 20 cm) between the antenna radiating structures and nearby persons.
5.6 Antennas: Type PCB type Antenna Gain Impedance Application Min Separation 1.0 dBi 50Ω Fixed 20 cm. The antenna is permanently attached, can’t be replaced. 5.7 Label and compliance information: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2) L’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptibled’en compromettre le fonctionnement. The system integrator must place an exterior label on the outside of the final product housing the AEH-W4F1 Modules. Below is the contents that must be included on this label. OEM Labeling Requirements: NOTICE: The OEM must make sure that FCC labeling requirements are met.
