User Manual

1 2 3 4 5
Fast Installation Manual
Quality . Service . Competitiveness
Before operating this unit,please read these instructions
carefully,and save them for future use.
(1). login Eseecloud APP, power on camera,wait for the
camera to start the configuration mode prompt tone (if
you do not hear the device startup configuration mode
prompt tone, please long press the reset button for more
than 3 seconds to reset the device.
(2). Please go to the phone system settings (WiFi hotspot
list)and select the device hotspot connection starting with
IPC. The default password is 11111111(Fig 1)
Please keep connected with device hotspot when adding.
(3). Open APP,click “+” in the device list(Fig 2) to enter
scanning interface(Fig 3).
Setting installation and configauration
1. Wireless add configuration steps
Fig 1
Fig 2 Fig 3
1.1
(1). Scan the QR code on the camera ,Click “Add”
(Fig 4).
(2). Please select remote view when view by WiFi or
other network,please click direct connection when
network is not available.(Fig 5).
Remote view: Click”remote use”(Fig 5),select WiFi to
configure the network (App will search WiFi nearby
device and show under the interface) (Fig 6),click
confirm and start configuration (Fig 7),follow the
interface instructions to set device name and
password after success configuration (Fig 8 and 9),
return to the device list after adding successfully.
Direct connection: Click”Local use”(Fig 5),follow
interface instructions to set device name and
password(Fig 8 and 9),return to the device list after
adding successfully.
There is a QR code on the camera ：
Fig 4 Fig 5
V3.3.20
APP Download and Installation
Users can search “EseeCloud” on APP store or “IP PRO” on
Google Play,or scan the QR code below to install the APP.
EseeCloud APP APP download
Note: For iOS system, it requires iOS 8.0 version or above.
For Android,Android 4.4 or above.
Appearance
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details
are subject to the receipt.This manual is only for the installation instructions
of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
1
Photosensitive
2
3
Reset button
SD card slot
RST
WIFI
4G
SIM
TF
1
Photosensitive
2
4
5
Reset button
DC power supply (12V)
Network port and
indicator light
3
SD card slot
(* You can see it by unscrewing the screw.)
2
Reset button
4
5
Network port and
indicator light
3
SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
Description
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
TF card, storage video and playback
video.
Power input
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
1. Photosensitive
2. Reset button
3. SD card slot
4. DC power supply
5. Network port and
indicator light