User's Manual

ManualsBrandsHirschmann Car Communication ManualsElectronics920287B

Test report no. 1911640 Page 1 of 2

EUT: 920287B

FCC ID: XTJ920287D

FCC Title 47 CFR Part 15

Date of issue: 2019-01-15

Date: 2018-06-06

Created: P4 Reviewed: P9 Released: P1

Vers. No. 1.18

TÜV NORD Hochfrequenztechnik GmbH & Co. KG

Rottland 5a, 51429 Bergisch Gladbach, Germany

Tel: +49 2207 9689-0

Fax +49 2207 9689-20

Annex acc. to FCC Title 47 CFR Part 15

relating to

Hirschmann Car Communication GmbH

920287B

Annex no. 5

User Manual

Functional Description

Title 47 - Telecommunication

Part 15 - Radio Frequency Devices

Subpart C – Intentional Radiators

ANSI C63.4-2014

ANSI C63.10-2013

Summary of content (9 pages)

PAGE 1
Test report no. 1911640 EUT: 920287B Page 1 of 2 FCC ID: XTJ920287D FCC Title 47 CFR Part 15 Date of issue: 2019-01-15 Annex acc. to FCC Title 47 CFR Part 15 relating to Hirschmann Car Communication GmbH 920287B Annex no. 5 User Manual Functional Description Title 47 - Telecommunication Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators ANSI C63.4-2014 ANSI C63.10-2013 Date: 2018-06-06 Created: P4 TÜV NORD Hochfrequenztechnik GmbH & Co.
PAGE 2
Test report no. 1911640 EUT: 920287B FCC ID: XTJ920287D Page 2 of 2 FCC Title 47 CFR Part 15 Date of issue: 2019-01-15 User Manual / Functional Description of the test equipment (EUT) Date: 2018-06-06 Created: P4 TÜV NORD Hochfrequenztechnik GmbH & Co. KG Rottland 5a, 51429 Bergisch Gladbach, Germany Reviewed: P9 Released: P1 Vers. No. 1.
PAGE 3
Date: 20.12.2018 Revision: V1.0 User's manual / Operational Description 920287B 920287B FCC ID: XTJ920287D Transceiver Remote Entry 434MHz User's manual / Operational Description Name, Department Autor Date Unterschrift Jörg Maisenbacher Freigabe Verteiler HCC Antennen Page 1 / 7 Diese Unterlage ist unser Eigentum. Jede Vervielfältigung, Verwertung, Mitteilung bzw. Weitergabe an Dritte ohne unsere vorherige Zustimmung ist untersagt. Zuwiderhandlungen verpflichten zu Schadenersatz.
PAGE 4
User's manual / Operational Description 920287B Date: 20.12.2018 Revision: V1.0 Table of Contents 1 Change history ..........................................................................2 2 Overview ...................................................................................3 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Block diagram ............................................................................................ 3 Broadcast reception amplifier .......................................................
PAGE 5
User's manual / Operational Description 920287B 2 Date: 20.12.2018 Revision: V1.0 Overview 2.1 Block diagram Figure 1: Blockdiagram of the remote-entry circuit 2.2 Broadcast reception amplifier AM 530-1600kHz FM 88-108MHz 2.
PAGE 6
Date: 20.12.2018 Revision: V1.0 User's manual / Operational Description 920287B 2.4 Interaction 2.5 Installation The remote control box is installed inside a vehicle and behind the cabin cover. Only service personel is able to touch or handle it. 2.6 Operating temperature range -40 … +85°C 2.7 Interface  Supply Voltage (+12V)  RF-Interface; input / output  Data-Interface 1-wire [bidirectional, digital, open-collector] 3 Operational characteristics 3.
PAGE 7
Date: 20.12.2018 Revision: V1.0 User's manual / Operational Description 920287B Current consumption (TX) Frequency range @+10dBm output power @ 50Ohm ECE 40 mA 433,44 434,40 MHz min max 3.
PAGE 8
Date: 20.12.2018 Revision: V1.0 User's manual / Operational Description 920287B 3.4.3 Channel definition The following table shows the center-frequencies for each channel. The frequency-separation between two adjacent channels is 450 kHz. Channel name name Short name channel 1 channel 2 channel 3 CH1 CH2 CH3 Center-frequency ECE: ECE: ECE: 433,47 MHz 434,37 MHz 433,92 MHz table 1: center frequencies of all channels 3.4.
PAGE 9
Date: 20.12.2018 Revision: V1.0 User's manual / Operational Description 920287B Operating mode => XTO Oscillator (fXTO=24,2879MHz) FRC Oscillator (fFRC=6.36MHz) SRC Oscillator (fSRC=125kHz) 4 Init off on off Polling active sleep on off on off TX-Mode RX-Mode on on off on on on off off Operational Procedures After connecting supply voltage, the module is NOT in normal operating mode.