HS-3245 TOUCH SCREEN MP3/WMA PLAYER USER MANUAL
Support: Thank you for purchasing a Hip Street product and we hope you enjoy using it Please visit our website at www.hipstreetonline.com. We have a Frequently Asked Questions FAQ section where you will find answers to most of your questions. If you do not find an answer there, please use the option to contact our technical support department and kindly send us an email detailing your question and we will get back to you promptly.
Preface Kindly read and retain all the operating instructions before operating the unit. We cannot assume any liability that may arise out of improper operation or incidental/accidental damages. The contents of this user manual are subject to change based on newer developments.
I. Features: 2.8-inch 320x240 dot matrix color TFT display Touch screen interface Supports MP3 /WMA playback. Supports MPEG-4(AVI) video formats Supports JPEG picture viewing FM tuner.
II. Note: 1. Do not use the unit in places that are extremely hot, cold, dusty, or humid. 2. The battery life will differ with different usage conditions and modes. 3. Please charge the unit when any of the following cases occur: A. The battery indicator informs of a low battery B. The player turns off automatically, and turns off again after rebooting. C. The keys become inactive 4. Do not disconnect the player while it is formatting or uploading/downloading. This may lead to errors 5.
IMPORTANT: If you need basic help with this product to load songs/photos onto this player, please visit our website at www.hipstreetonline.com or please review the Interactive Product Tutorial that comes with this product and that is stored on the CD that accompanied this product. You must have songs in .mp3 or .wma file format on your computer to be able to load them onto this player. You must have photos in .jpg file format on your computer to be able to load them onto this player.
III.
IV. Main Interface In the main interface, click “◄/ ►” in the main interface to select the menu. V. Audio playback Select “Music” in the main menu, and click the music icon to enter. The player starts playback automatically.
Operation on buttons: Click “ / ” icon to select files. Keep on clicking the “ / ” icon to REW/FF. Click “►” icon to start playback. Click the icon again, it pauses, and the icon turns to . Click the icon to A-B repeat. Click once to set the start point of the repeat section “A”; Click again, the end point B is set, and the player starts to repeat the section. Press “ ” button the third time to cancel A-B repeat. Functions: 1. Adjust Volume Click the top of the volume. 2.
Click the top or bottom of the to enter the sub-folder; click icon to select the folder you want. Click icon to return to the previous folder. 3. Delete files Select the file you want to delete and click 4. FF/REW Keep on clicking the “ / icon to delete it. ” icon to REW/FF.
5. Lyrics Display While playing music files, if there is a lyric file which has the same name with the music file, and is placed in the folder of the playing music file, the player will display the lyrics directly. VI. Video playback Select “Video” by clicking the “◄/ ►” icon in the main menu, and click it to enter. The player enters the video file list first. (If the T-flash card is inserted, the player will display two folders “Card” and “Flash memory”. Select one and enter to operate”.
Operation on buttons: Click the top or bottom of the icon to select the file you want, and click the icon. Click “ ” to return to the main menu.
Functions: 1. Playback/pause While playing video files, click the icon to pause. Click it again to resume playback. 2. FF/REW Keep on clicking the “ / ” icon to REW/FF. 3. Return Under video playback interface, click icon to return to the play list. 4. Adjust Volume Under video playback interface, click “+” icon to increase the volume; click “-” to decrease the volume. 5. Delete files Select the file you want to delete and click icon to delete it.
VII. FM tuner [Your earphones MUST be plugged in for FM to work] Select “Radio” in the main interface, and click it to enter.
1. Searching for stations Select “Manual”, and keep on clicking it for 2 seconds, it enters the manual searching interface to search for the station manually. Keep on clicking “ / ” icon to searching for stations from low or high frequency. There will be no voice while searching for stations. It will stop searching until it searched for the next station. Click “ / ” icon momentarily, the frequency will be decreased or increased 0.1MHz every time. 2.
5. Auto searching: Select “Auto”, and keep on clicking it for 2 seconds, it enters the auto-searching interface and starts to searching for stations automatically. 6. Adjust volume Click the top of the the volume. icon to increase the volume. Click the bottom of it to decrease 7. FM recording Click icon to enter the FM recording interface. Click it again it starts to recording. 8. Return to the main menu Click to return to the main menu. VIII.
Select “Photo” in the main menu, and click it to enter. The player enters the file list first.
Click the top or the bottom of the icon to select files. Click file; click icon to return to the main menu. Click icon to delete the file you selected. icon to open the / ” icon to select the Click the ► icon to browse the pictures automatically. Click “ picture you want and press the POWER ON/OFF button to display the picture in full screen. Click to return.
IX. E-book [Reading TEXT] Select “TEXT” in the main menu, and click it to enter. The player enters the file list first.
Click the top or the bottom of the icon to select files. Click file; click icon to return to the main menu. While reading the e-book, click the top or the bottom of the previous page or next page. icon to delete the file you selected. Click Click icon to return.
Click icon to load bookmark. Keep on clicking icon to save bookmark. X. Recording Select “Record” in the main menu, and click it to enter.
Operation Click icon to start recording, the icon turns to . Click icon to pause, keep on clicking to stop and save the recorded file. icon to return to Main menu. Click XI. Explorer Select “Explorer” in the main menu, and click it to enter. (If the T-flash card is inserted, the player will display two folders “Card” and “Flash memory”. Select one and enter to operate”.) There list all of the files in the player.
Click the top or the bottom of the icon to select files. Click Click icon to return. Click to delete the selected file. Press and hold “M” button to return to the main interface. 22 to playback.
XIII. Settings Select “Settings” in the main menu, and click it to enter the setting interface. After selecting the corresponding setting, click to return to the previous menu. 23 icon to enter.
1． ．Music Playback setting In this setting interface, there are four options to be selected: repeat mode，play mode， EQ select and user EQ set . ① Repeat mode In this menu, there are seven options to be selected: once, repeat one, folder once, folder repeat, All once, All repeat and Intro. ② Play mode In this menu, there are two options to be selected: order and shuffle. ③ EQ selection In this menu, there are eight options to be selected: Normal/3D/ Rock/Pop/ Classic/ Bass/ Jazz/ User EQ.
② Listening ZONES In this menu there are four options: China, Europe, Japan, and the U.S.A. For Canada, please choose U.S.A. 3． ． Record setting In this setting there are two options: record quality, record volume. ① Record quality In this menu, there are two options: High quality，General quality. ② Record volume In this menu, there are five options to be selected: +1, +2, +3, +4, +5. The higher the level is，the bigger the record volume will be.
In this menu, there are five options: 1, 2, 3, 4 and 5. The higher the level is, the darker the brightness will be. ③ Backlight mode In this menu, there are two options: Normal and Power save. 5. Auto Play Set To set the time of autoplaying while viewing pictures or texts. ①Text In this menu, there are five options: 1second, 2 seconds, 3 seconds, 4 seconds and 5 seconds. ②Jpeg In this menu, there are five options: 1second, 2 seconds, 3 seconds, 4 seconds and 5 seconds. 6.
2). About The following information is displayed: this machine storage capability, remaining capability, system software version, which is read only. Click icon to exit. 3). Firmware upgrade In this menu pop up dialog box, click “Yes” or “No” icon to confirm upgrade firmware. 7． ． Power off time In this menu, there are many options to be selected as follows: OFF, 10 minutes, 15 minutes, 30 minutes, 60minutes and 120 minutes. 8.
XviD/DivX format to code the video file. The quality of this type of video file is good and the size of the video file is small. This AVI converter supports converting AVI, MPG, MPEG, RM, RMVB, WMV, DAT, MP4, ASF, MKV, VOB formats to AVI format in high speed and high quality. System requirements: - The Converter software needs the basic configuration as follows: CPU：Intel or AMD processor , Intel Pentium 3 or above，including Intel Celeron series Operation steps: 1.
4. The above image shows the starting screen. Conversion Steps: ① Click on ‘Add’ to add a file to convert. Then select source file path, as shown in the picture below. This indicates the file that you want converted to play on this player.
② You now have to select where this converted file is to be saved. Select the target file path. ③ Select the convert quality and aspect ratio. Make sure resolution is set at 320x240.
④ Once this is done，press ‘Save’ key. You may continue to add another file，or press ‘Close’ key to return previous interface. 5 Press ‘Convert Now’ to start converting: After the conversion progress shows 100%, it means that the file is converted successfully. You may now use your USB cable to transfer the file to the player. You are now ready to watch the video file on your player XV.
2. Click “Next” as per the promotion on the dialog box. In the “browsing” option of the fourth dialog box, select the “upgrade fool” folder of the enclosed CD, and click “OK” to confirm. 3. Push the power switch to the OFF position, press and hold the POWER ON/OFF button, and then connect the player to the PC via USB cable. 4. The PC displays “rock USB Device”, and asks to install the driver. (If the driver is installed, this progress is skipped.) 5.
6. Click “Open” and select the firmware. 7. Click “Start” to upgrade.
8. Disconnect the player and the PC after upgrading. XVI. Troubleshooting 1. Failure to start/No response on buttons/ player freezes ·Check if the POWER SWITCH is on the position of “ON”, and check the power of battery; ·Connect the unit with your PC or the AC adaptor and check again; ·Push the power switch to the direction of OFF and push it to ON again. Press OK button to turn on the player. ·If it still fails to start after charge，please contact our customer service center.
2 No voice in the earphone ·Please check the volume is 0. ·Please check the connection of the earphone. 3. Serious noise ·Please check whether the pin of the earphone is dirty, as if this is the case, it could be the cause of noise. ·Please check whether the music file is corrupted in some way. Please try playing another music file. If the file is corrupted, it could cause serious noise or not play at all. 4. No sound from the loud speaker ·Check if the setting on the loudspeaker is set as CLOSE.
·Check whether the memory is used up or not; ·Check whether the USB cable is broken or not. 7. Does not support WMA format music The player does not support WMA format music files which are lower than 64kbps bit rate. Need assistance? Please call us! If you encounter any difficulties with this product, please visit our website at www.hipstreetonline.com and review our support section or call us. Our representatives are ready to help you with any questions about your product.
