Your Guide to Solo Note: References to DAB/DAB+ apply only to models outside North America. Front 1. 2. Power/Volume: Push in briefly to turn Solo on or off. Rotate to adjust the volume. Menu: Press and hold to call up the main Menu. Rotate to navigate the Menu and push in briefly to select. In DAB mode, rotate to call up the DAB station list and push in briefly to select a station. In FM mode, rotate to manually tune stations or push in briefly to auto seek to the next strongest FM station.
Back 1. Power inlet: Insert the included power cord. The internal switching power supply will automatically detect the correct voltage. 2. DC: For use with an external 20VDC/3A adapter (not included). Never use an adapter and the power cord simultaneously. 3. Headphones: Connect a set of stereo headphones. 4. Line out: Fixed level output to connect Solo’s audio to a home receiver or other device with an analog audio input. 5. Auxiliary 1 (Hi-Res): Connect the analog audio out from another device. 6.
Press any key twice except Power and Alarm in standby to toggle the display off/on. When the display is off, press any key (except Power and Alarm) once to turn the display on for 7 seconds. Set Up Wizard After turning Solo on for the first time, the Como Audio logo will be displayed, followed by the Set Up Wizard. Follow the on-screen instructions for each step.
My Music: UPnP If you have music on other devices on your WiFi network you wish to stream to Solo (most commonly using Windows Media Player (WMP), open Windows Media Player on your device and make it the default player. Under the “Stream” tab, select “Turn on media streaming”, and next to “CA Solo”, tic “Allowed”. On your Solo, Press and hold the menu knob and select System Settings, then select Music player, and Shared media. Be sure your device and Solo are both connected to the same WiFi network.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Fraunhofer: MPEG-4 HE AAC Audio decoder MPEG-4 HE-AAC audio coding technology licensed by Fraunhofer IIS. http://www.iis.fraunhofer.de/amm/ The Spotify Software is subject to third party licenses found here: https://developer.spotify.com/esdk-third-party-licenses/ The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Como Audio, LLC is under license.
15. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product from lightning storms and power line surges. 16. Unplug this product from the wall outlet and refer servicing to qualified personnel under the following conditions: a. When the power supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c.
Federal Communication Commission (FCC) Interference Statement FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.