w w w. r e v o . c o .
Safety Information 3 Setting BLIK’s Clock 10 Benefits of Internet Radio 5 Setting An Alarm 10 BLIK Overview 5 Sleep Function 11 Warranty 5 FM Operation 12 Warranty Registration 5 M-Port 12 Before Getting Started 5 Main Menu 12 Controls and Connections 6 SW Version and Radio ID 12 Remote Control 6 Firmware Updates 12 Powering BLIK 6 Factory Reset 12 Remote Control Operation 6 Time Setup 12 Reciva Radio Portal 6 Register 12 Connecting To Your Network 7 Media Playe
Safety Information 8. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Welcome to BLIK Radiostation Thank you for buying our BLIK WI FI internet radio, we feel sure that it will provide you with years of enjoyment and reliable service. This guide has been designed to quickly get you up-and-running and listening to internet radio, offer guidance on the more complex features of this product and provide information on safety, warranty and registration.
Controls and Connectors Remote Control Powering BLIK Radiostation Your BLIK Radiostation radio can be powered from the mains using the power adaptor supplied, or from it’s internal battery pack. To power from the mains, insert the power adaptor plug into the DC power socket on the rear of BLIK Radiostation. Pressing the button will switch BLIK Radiostation on. Only use the power adaptor supplied. Replacements can be purchased from our website www.revo.co.uk, or alternatively call us on 01555 666 161.
Connecting To Your Network n Extend the antenna on the rear of your radio. Press the button to power-up BLIK Radiostation. n After a few seconds this message will change to a welcome message. n For initial use, Press button to scroll up and down each mode or simply press MODE button to enter. n Press button to select INTERNET RADIO, and press the SELECT button. Then the display will show a list of region for your choice. n In some cases BLIK Radiostation may find more than one network.
Choosing a station n When BLIK Radiostation has connected to your wireless network, you are now ready to select a station. n Please Note: You can move back to the previous screen at any time by pressing the button. n You will now be given five option of selecting a station by Location, Genre, Search Stations, Popular stations and New stations. Use the buttons to pick your search method, and then press SELECT.
General Operation Changing Volume Returning To Main Menu To change BLIK Radiostation’s volume, press the VOL and VOL Simply press MENU button. Alternatively, button, the numerical volume level will be displayed on Press MODE choice the different mode, except the BLIK’ screen, and BLIK Radiostation will MPort Mode’, and then You can move back to remember its previous volume level after BLIK Radiostation’s top-line main menu at any shutdown and power-up.
Alarm + Clock functions (IN all modes) Setting BLIK’s Clock n Turn BLIK on and press MENU, Press button to enter MAIN buttons to scroll up and down until SYSTEM SETUP is appeared, then press SELECT to confirm. n After enter time setup mode, Press buttons to scroll up and down. there are also both auto to update and set 12/24 hour is available for you. n BLIK will now ask you to set the time. Press SELECT and use the buttons to change the hour, and then press SELECT to set.
Sleep Function n To program BLIK to turn off after a pre-defined period of time, press the SNOOZE/SLEEP button. Use the buttons to define the Sleep period which between15 – 90 minutes and press SELECT. n The Sleep icon will appear on the LCD screen, press the SNOOZE/SLEEP button once more, the bottom line will show how time will be expired. n BLIK will now automatically put itself into standby mode after the time has elapsed. ..........................................................................
FM Operation Mode n To listen to FM radio stations switch BLIK on and press the MODE button. n If this is the first time BLIK has been in FM mode, it will start at the beginning of the FM frequency range. Otherwise, the last frequency or FM station will be displayed. n To scan through the FM frequency range, use the buttons. To ‘SEEK’ the next active station, press and hold buttons. FM Station Presets n BLIK can store ten FM presets, accessed via the keypad or remote control.
Media Player Operation Step 1: Set Up Media Sharing in Windows Media Player 11 After you download and install Windows Media Player 11 for Windows XP and connect your radio to the network, you need to set up media sharing so that you can share music with your radio. The following steps describe how to set up media sharing in Windows Media Player 11 1.In Windows Media Player 11, click the small arrow below the Library tab, and then click Media Sharing.
Step 2: Play Music on the Internet Radio. After installing and configuring your radio and Use the controls to browse according to the Windows Media Player 11, you are now ready following criteria: All Music, Genre, All Artists, to play music via a wireless connection. Contributing Artists, Album Artists, Composers, The following steps describe how to play Albums, Playlists, Folders or Star Ratings and then press the SELECT button to confirm. music with your radio.
Troubleshooting If you are experiencing any problems with 5. If you have an encrypted network, check your BLIK Radiostation internet radio please read that you have entered the correct key or the following ‘troubleshooting’ guide. pass phrase into the radio. Remember that Alternatively you can visit the HELP section text-format keys are case sensitive. If, when of the Reciva website (www.reciva.
Revo Technologies Ltd The Inox Building Caldwellside Lanark Scotland United Kingdom ML11 7SR Telephone Support 01555 666 161 Online Support www.revo.co.uk/support support@revo.co.uk ..........................................................................
Hip Shing Electronics Ltd. NOTE: Internet Radio FCC ID:BZABLIKWI-FI THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.