Safety Precautions For your safety and protection of the E-bot, please read and abide by the following important safety precautions. 1) Do not plug the AC adapter into a faulty electrical outlet. This is to prevent electrical shock or fire. 2) Do not touch the AC adapter with wet hands. 3) Use only the AC adapter provided with the E-bot. Using another AC adapter may damage the device. Be advised that damage caused by misuse is not covered by the warranty.
Marked Symbol Description Caution: is used to note information for safe and proper use of the product. Note: is used to introduce reference and usage Tips.
Table of Contents Safety Precautions ...................................................................................................................................................................... 2 Marked Symbol Description..................................................................................................................................................... 3 Package Contents .............................................................................................................
1) Voice Guide ............................................................................................................................................................. 44 2) E-bot operating Language ................................................................................................................................. 45 3) Camera position preference .............................................................................................................................
Package Contents 1) E-bot 2) 1 E-bot Battery 3) Wireless controller 4) Battery for Wireless controller 5) AC Adapter 6) Cables (USB 3.
E-bot PRO Orientation 1) Product Near Camera Lens Camera Camera Arm’s Handle Camera Arm Camera Arm’s Joint Front controller Arm Lock button Table Wireless controller SD Card
2) Back side of product USB 3.
4) Front of product Power LED Power Button Wi-Fi LED LED Light Button 5) Wireless controller Power LED Distance View Button Near View Button Enter Button Menu Button Joystick (Navigation) Zoom in / Color Change Button out Button Auto Scroll Button OCR Button Play/Pause Button
6) Back side of Wireless controller Power Switch ID Switch Battery Battery Cover
Getting Started 1) Unfolding the E-bot Follow the instructions below to setup the E-bot. ① Grip the camera handle and unfold it upward.
② Continue to unfold the camera until it lays flat on the desk or table top.
③ Press and hold the Lock button on the left side of the E-bot. While holding the lock button, unfold the longer arm upward until it clicks in to place. ④ The camera arm should be at a 90 degree angle as shown in the illustration.
⑤ The E-bot is ready for use. Folding ① Press the power button to turn off the power. ② Press the lock button, fold the longer arm down. ③ Grip the camera piece and fold it inside as well.
2) Inserting the battery ① Grip the product’s main body and insert the battery. ② When the battery is fully inserted, you will feel and hear it click in to place. Removing the battery ① Lift the battery release button on the back side of the unit. ② While lifting the battery release button, pull the battery out of the compartment.
② ① 3) Charging Charging via the AC Adapter ① The DC jack is located on the back of the E-bot. ② When E-bot is connected to the AC adapter, the battery is being charged. When you use the E-bot for the first time or after a long period of disuse, please allow the unit to charge for more than 5 hours Charging via USB ① Connect the larger end of the USB 3.0 cable to the USB port on your PC. ② Connect the smaller, flatter end of the USB 3.0 cable to the USB port on the back side of the unit.
If you connect the E-bot to a computer via USB while E-bot is powered off, the E-bot’s battery is charged. The power LED indicator The power LED is located on the top right of the control panel of the main body. The power LED indicates status as follows: When the battery is being charged, the Power LED appears red. When the battery is fully charged, the power LED color is changed to green.
5) Wireless Controller Power On / Off ① Push the power switch on the back of the wireless controller to ON. To power it off, push the power switch to OFF. ② Once you press the button on the wireless controller, the Power LED lights up.
① Press and release the power button on the E-bot's main body to power the unit on or off. ② The HIMS logo appears and the camera motor automatically places the camera in the downward position for viewing a document on the reading plate. The loading time takes 20 to 25 seconds. ③ When the power is turned on, the Power LED changes to green. When the battery is being charged, the Power LED appears red. ④ Press the power button briefly again to place the E-bot into sleep mode.
7) Installing the PC Viewer Program(Will be added later) 8) Connecting to displays E-bot is compatible with various types of display devices, such as desktop video monitors, laptop computers, and Apple or Android tablets. Monitor USB Monitor PC Pad, Window PC Connecting a monitor (HDMI) ① Connect the monitor's power cord to a power outlet. ② Connect the HDMI cable to the HDMI port on the monitor. ③ Connect the opposite end of the HDMI cable to the HDMI port on the back side of the E-bot.
If the monitor has no HDMI port, please use the included HDMI to DVI gender adapter. Connecting an On-Lap monitor (DC OUT) The On-Lap Monitor is a portable, USB powered LCD, sold separately. You may purchase it from HIMS International. ① Connect the On-Lap Monitor's USB power cable (USB 2.0) to the DC OUT port on the back of E-bot. Video & Power Port ② Connect On-Lap’s HDMI cable to E-bot’s HDMI port to display E-bot’s output on the On-Lap monitor.
Connecting to a PC (USB) ① Connect the E-bot’s USB 3.0 port to the USB port of your PC using the included USB 3.0 cable. ② Turn on the E-bot. At this point, make sure the Wi-Fi switch is set to off. ③ And run the E-bot Viewer on your PC. Select USB as the connection method. If you connect E-bot to a PC which does not support USB 3.0, the enlarged image resolution is automatically adjusted to accommodate the difference in connection speed.
PC’s, Android tablets and Apple iPads. ① To output to your PC via Wi-Fi, turn on the E-bot. ② Set the E-bot Wi-Fi switch to ON. The Wi-Fi LED is changed to blue to indicate Wi-Fi is on. ③ Enter the PC's wireless network connection area and connect to the E-bot network. ④ When you are asked for the network key, please enter the Ebot’s Wi-Fi password. The default password is '00000000 '.
the Wi-Fi indicator light on the main body appears blue. ③ Be sure Wi-Fi is ON on your tablet, then select and connect to “E-bot” from the Wi-Fi networks list. ④ Connecting to E-bot requires a network key. By default, it is “00000000”. Enter the network key and connect as you would normally connect to a Wi-Fi network on your tablet. ⑤ Run the E-bot Viewer app on your tablet, and make sure that the image is displaying correctly. In the E-bot's options menu, you can change the Wi-Fi password.
1) Changing Camera Modes E-bot has two camera modes; near viewing mode and distance viewing mode. The camera mode can be changed by pressing the buttons on the top row of the wireless controller. Press the button on the right to switch to Distance view, and press the button on the left to switch to Near view.
Magnification, color mode, and function settings for each mode are saved separately. So when switching the camera mode, the settings are automatically changed to the settings you last used for that mode. 2) Magnification You can change the magnification level to suit your visual needs and the size of the print you’re currently reading.
Press the Zoom In button (+) to increase the magnification level. Press the Zoom Out button (-) to decrease the magnification level. As you press and hold either of these buttons, the magnification level is adjusted continuously. 3) Changing the Color Mode You can change the color of the text and/or background on the screen to accommodate your visual needs in regards to text type and your visual condition. You can use the Mode button on the wireless controller to cycle through the color modes.
There are 7 color modes provided by default:. 1. Natural Color Mode 2. White text / black background 3. Black letters / white background 4. Black and White (Gray) 5. Yellow letters / black background 6. Yellow letters / blue background 7. Green letters / black background The E-bot PRO allows you to alternate between Natural color mode and your current color mode setting.
may need to adjust the contrast to read the documents or books clearly. Press the Enter button and Zoom In/Out button simultaneously on the wireless controller. 5) LED light On/Off In the near view mode, the built-in light is automatically turned on to ensure a clear image. E-bot contains a sensor to detect the amount of illumination in your current surroundings, and lighting is automatically adjusted according to the ambient brightness. Press the LED button to turn the lights on or off.
glossy objects, please turn off the LED light to avoid glaring. If you turn the power off, when you turn it back on, the LED light is automatically turned off. When using distance view mode, the LED light is not turned on.
Release both the Zoom in and Zoom out buttons, and the magnification level returns to the rate you were using before pressing the Zoom buttons. 7) Focus lock By default, E-bot PRO uses automatic focus. However, if you’re writing under the camera or doing something else on which you don’t want the camera to focus, you can use the Focus lock to lock the focus on the text rather than allowing the auto focus to follow your hand or pen.
Focus is unlocked automatically when the camera is switched from Distance view mode to near view mode or powering off when focus is locked. 8) Freeze Press and release the Play/Pause button to take a still shot. Press the Play/Pause button again to release the still shot and return to the live camera mode. When the screen is frozen, the Freeze icon is displayed on the screen.
When the screen is frozen, the magnification level cannot be reduced. Advanced features 1) Using the menu You may change many of the E-bot’s settings via the Options menu. Use the menu in the manner described below: 1. Menu button: 1) Open Menu 2) Select item 3) Close Menu 2. Joystick (Up/down): Move between items Joystick (Right/Left): Change setting values 3. Enter Menu: Select item ① Menu: Press the menu button on the wireless controller and a menu window pops up on the left side of the screen.
functions in the 'OCR' tab. The “Files” tab allows you to control your saved images, videos, and OCR recognition files. ③ You can move between the Tabs by moving the joystick left and right. ④ You can move through options in a tab by moving the joystick up and down. To select an Item, press the Enter button. ⑤ Moving back a level: to move back a level in the menu structure, press the menu button. ⑥ Closing the Menu: To close the menu, press the menu button from the top level of the menu structure.
① The range setting allows you to specify the size of the page you are viewing/scrolling. ② Press the menu button, navigate to the auto scroll menu, and then press the enter button. ③ Press the enter button on the range setting. ④ You can select the A4 size or custom setting. Speed setting ① The Speed setting lets you control how fast the camera scrolls through the document. ② Press the menu button, navigate to the auto scroll menu, and then press the enter button.
the mode you want to set. ④ The text Text color is displayed on the screen. Select the color of the text using the left and right arrows. The text color and background color being displayed are exchanged when the [Reverse] is activated. ⑤ Select the Background color when you have finished selecting the text color. Use the same method as when setting the text color. If Grayscale is chosen when selecting the text color, the Color setting mode is exited without selecting a Background color.
④ When you have made your selection, you are returned to the menu. 4) Marker The Marker helps you to focus on the text that you are reading by narrowing the display area with window markers or by underlining the sentence that you are reading. Set Marker There are 4 kinds of markers; Horizontal Line Marker, Vertical Line Marker, Horizontal Window Marker and Vertical Window Marker.
Vertical Window Marker ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR ① Bring up the Menu, select “Options” then select “Marker”. ② Next, select the marker type; ‘Horizontal line marker’, ‘Vertical line marker’, ‘Horizontal window marker’, ‘Vertical window marker’. A check mark appears next to the selected marker. ③ After you have chosen the marker setting, the selected marker is displayed on the screen and you are returned to the Menu again.
5) OCR Recognizes text under the camera when using near view mode and reads it aloud with built-in text-to-speech voices. OCR execution ∙ OCR button : OCR execution ∙ button : OCR Play/Pause When using near view, the image freezes when the OCR button is pressed. The text displayed on the frozen screen is recognized then read aloud using the internal TTS voices. While recognition is being performed, a message indicating recognition is in progress appears.
If the magnification level is changed during viewing of recognized text, the magnification level is changed. However, if the OCR view is set to image, the magnification level cannot be adjusted below the magnification level that was set when OCR was first played. You may change the Color mode when viewing an OCR scan. The available color modes are the same as those available in near view mode. Reading/navigating recognized text Move the Joystick to the Right to move to the next sentence.
screen. Line : Extracts recognized text and shows the line currently being read aloud.. Word : Extracts recognized text and shows each word as it is read aloud on the screen. OCR screen ↔ live -View mode While using OCR, you can return to the live -view mode. ① Press both the Enter button and OCR button on the wireless controller. ② To return to the OCR view, press the Enter button and OCR button at the same time. Note: You cannot access the menu in this mode.
the OCR tab. Then, select the OCR language setting. ② Select the language you want to add. E-bot can recognize up to 3 languages simultaneously. The base language cannot be unchecked. Language recognition is distinguished by paragraph if the selected language is based on Alphabet. 6) Save E-bot PRO can save videos, photo images and OCR recognition files via an SD card. Before using the storage function, you must insert an SD card.
Videos ① To record the video, press the play/pause button for more than 2 seconds. ② When finished recording the video, , press the play/pause button for more than 2 seconds to save it. ③ Pause : To pause recording, press the play/pause button quickly. ④ Cancel : press the menu button to cancel the recording. ⑤ To access the saved video, bring up the Menu and select “video” from the “Files” tab. ⑥ You can see the saved videos. You can fast-forward through a video using the joystick.
1) Voice Guide This option determines whether E-bot speaks as you navigate menus or press buttons. Voice Guide On/off ① Bring up the Menu and select “Voice guide” from the ‘Options” tab ② If the checkbox is checked, the voice guide is on; if it is not checked, voice guide is Off. Press the Enter button to change the setting. TTS Volume You can adjust the volume of the TTS voice in two ways. Adjusting on the main body ① E-bot’s volume dial is located on the right side of the body.
Enter to save the settings. You can mute the volume by setting the level to 0. TTS Speed The TTS speed setting controls both the speed of the guide voice as well as the OCR reading voice. ① Bring up the Menu, and select “TTS speed” from the OCR tab. ② The TTS speed is adjustable using 14 levels. Use the Left and Right arrows to adjust the speed of the TTS then press Enter to save the setting. TTS Pitch You can adjust the TTS voice pitch.
3) Camera position preference Position setting You can set your favorite positions for the camera in the near/distance view mode, and automatically move the camera to the saved point. ① In the near/distance view mode, bring up the Menu and select “Camera position preference” from the ‘Options’ tab. ② Place the camera in the location you want to save, and then press the enter button. ③ After the setting is completed, if you press the near or distance view button, the camera goes to the set position.
or initialize all settings. Initialize Options: Initialize settings in the Options tab of the Menu. Initialize OCR: Initialize settings in the OCR tab of the Menu. Initialize all settings: Initialize all settings including options tab and OCR tab settings. 5) Information Use this option to check general information about the E-bot. ① Bring up the Menu and select “Information” from the “Options” tab. ② Here, you can check the following information about E-bot:.
③ A window asking for the new password appears. Input the 8-digit password in the manner described above. ④ A window asking you to reconfirm the password to change appears. Input the new password again. ⑤ When you have finished the above steps, the new password is set. 7) Keyboard Hot keys When using the E-bot Viewer application on your PC to display and control E-bot, you can use your keyboard and mouse to control ebot’s functions.
Tablet Viewer Gestures Functions Tablet Gesture Zoom In (Field 1) Move fingers away from each other Zoom Out (Field 1) Pinch fingers towards each other Find Position (Field 2) Two-finger one-tap more than 2 seconds
Next color mode (Field 2) One-finger flick to right Previous color mode (Field 2) One-finger flick to left Switch to Natural Color Mode (Field 2) Two-finger double-tap Contrast Up (Field 3) One finger flick to up Contrast Down (Field 3) One finger flick to down Freeze (Field 1) One finger Double-tap
OCR Execution (Field 2) One finger Tap for more than 2 seconds OCR Play/ Pause (Field 1) One finger Double-tap Move Sentence (Field 1) One finger flick to left or to right OCR Move paragraph (Field 1) One-finger flick up or down OCR Exit (Field 2) One finger Tap for more than 2 seconds OCR mode ↔ Camera Preview (Field 2) In OCR mode, Two-finger one-tap more than 2 seconds Menu Open
One finger Tap on the left end of the screen and flick to right Moving tap One finger Tap on the tap Move an item One finger Tap on the wanted item Select / Set / Enter the sub- One finger Tap on the wanted item item Save One finger Tap on the confirm icon Cancel / Exit One finger Tap on the cancel icon Close One finger Tap on the right end of the screen and flick to left
Quick Guide to PC operations Function PC Keyboard Mouse Zoom-in Wheels up Zoom-out Wheels down Find position - + For more than 2 seconds Next Color Left-click Previous Color + Right-click Quick color change - Increase Contrast - Decrease Contrast - + Freese Focus Lock OCR - + - Execution Click Wheel Play/Pause -
OCR Next Sentence - Previous Sentence - Next paragraph - Previous - paragraph Exit (In OCR mode) Bring OCR menu (In OCR mode) Right-click + OCR Mode ↔ Real View mode Open Moving tap Move an item Menu + Right-click + Left-click on the item or Left-click on the item or Select Items Left-click on the item Save Settings Left-click on the item Cancel Settings OR Left-click Exit
Close Exit program OR Left-click Exit + Troubleshooting 1) When the wireless controller does not work The main body and the connected controller’s channel setting value must be set the same for the controller to operate E-bot properly. If there are two or more E-bots in the same place, settings must be set differently, so that the controllers do not control the wrong E-bot, etc. Check the Main body channel values ① Please check the channel values on the rear of the Main body.
of your E-bot. If the channel value is different, please use (-) a screw driver or your fingernail to change the setting. ※ Changing the battery of the wireless controller, if the wireless controller does not operate even though the channel value is the same, please change the battery in the wireless controller. 2) Even though the values are the same channel, wireless remote control does not operate normally Replace the batteries in the wireless remote control.
FAX: 042-864-0133
An FCC warning NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT NOTE: IMPORTANT Safety Instruction: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(99/5/EC).
CONTACT INFORMATION Manufacturer Address : 174, Gajeong-ro, Yuseong-gu,Daejeon, KOREA 305-350 To locate in-country HIMS International Corporation, distributors of the Remote Controller (E-bot PRO Controller) please refer to the HIMS International Corporation Website http://www.himsintl.com These distributor(s) represent local contacts for this product.
EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY HIMS International Corporation 174, Gajeong-ro, Yuseong-gu,Daejeon, KOREA 305-350 declare under our sole responsibility that the product(s) Remote Controller (E-bot PRO Controller) – EB100PC to which this declaration relate(s) is in conformance with the following standards: EN 301 489-1 V1.9.2:2011 EN 301 489-3 V1.5.1:2012 EN60950-1:2006+A12:2012 EN 300 220-1 V2.4.11:2012 EN 300 220-2 V2.4.