PD-C English en
1
PD-C en Original operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Information about the documentation 1.1 Explanation of signs used 1.1.1 Warnings Warnings alert persons to hazards that occur when handling or using the product. The following signal words are used in combination with a symbol: DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality. WARNING! Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality.
1.4 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed. ▶ Write down the serial number in the table below.
CAUTION Visible and invisible laser radiation present hazards. Looking into the laser beam causes eye damage. ▶ ▶ ▶ Secure the area in which you will be taking measurements. Take care to avoid directing the laser beam toward other persons or toward yourself when setting up the product. Do not look directly into the light source. In the event of direct eye contact with the laser beam, close your eyes and move your head out of the path of the laser beam. Keep laser tools out of reach of children.
▶ ▶ ▶ ▶ ▶ ▶ The product and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed. To avoid the risk of injury, use only genuine Hilti accessories and additional equipment. Observe the information printed in the operating instructions concerning operation, care and maintenance. Never use the product without having received the appropriate instruction on its use or without having read this documentation.
3 Description 3.1 Overview of the product 1 @ ; = % & On/off switch Measure command buttons Touchscreen Micro-USB socket, type B Hinged cover ( ) + § / Laser exit Camera lens Glass cover Thread for extension, base Thread for extension, underside 3.2 Intended use The product described is a laser range meter. It is designed to be used for measuring distances. The measured distances can be used in conjunction with a wide range of calculation functions, e.g.
4.3 Power source Liion battery Built-in Capacity 3,220 mAh Rated voltage Standby time Battery life under normal operating conditions, display switched on 3.7 V > 200 h ≈ 10 h AC adapter voltage output 5V Charging time (depending on AC adapter and charging cable) ≈3h AC adapter current output ≤2A 4.4 Laser Laser class Wavelength Output power Time until activation of power-saving mode Visible, laser class 2, IEC/EN 60825-1:2007; Class 2 CFR 21 § 1040 (FDA) 635 nm < 1 mW 20 s 4.
6 Regular product updates Regular software updates are planned. Please download the PD-C updater utility for PC as well as the latest product manual with operating instructions and the latest software. The permanent link for the PD-C updater utility for PC is: https://www.hilti.com/updatePDC Minimum requirements must be fulfilled in order to use the software. Details can be found at www.hilti.com. 7 Switching off 1. Press the on/off switch for several seconds. 2. Select ‘Switch off’ from the menu. 3.
10 Disposal Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Technical documentation filed at: • Hilti Entwicklungsgesellschaft mbH Zulassung Elektrowerkzeuge Hiltistraße 6 86916 Kaufering Germany Schaan, 10/2015 Paolo Luccini (Head of BA Quality & Process Management / Business Area Electric Tools & Accessories) Edward Przybylowicz (Head of BU Measuring Systems / BU Measuring Systems) 14 Identification number of the notified body American Certification Body (ACB) 1588 9
2118448 *2118448* Hilti = registered trademark of Hilti Corp., Schaan Pos.