Mobile Video Recorder Quick Start Guide
Mobile Video Recorder (-SD) Quick Start Guide Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Mobile Video Recorder (-SD) Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Mobile Video Recorder (-SD) Quick Start Guide disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union.
Mobile Video Recorder (-SD) Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Mobile Video Recorder (-SD) Quick Start Guide Contents Chapter 1 Installation and Connection ........................................................................................ 1 1.1 Before You Start .................................................................................................................... 1 1.2 Environment .......................................................................................................................... 1 1.3 Install SIM Card..........................
Mobile Video Recorder (-SD) Quick Start Guide Chapter 1 Installation and Connection Note Device pictures in this section are only for reference. In condition that device pictures conflict with the real devices, the later prevails. 1.1 Before You Start Take out the device from the package. Check the device and accessories. Contact us if something is missing or damaged. 1.2 Environment Consider the following environment conditions when installing the device.
Mobile Video Recorder (-SD) Quick Start Guide Placing angle Place the device horizontally. The other placing angles may damage the device. Fixing position All the screws in the fixing positions must be fastened tightly to avoid device falling during the vibration in driving. 1.3 Install SIM Card Install 3G/4G SIM card to realize wireless communication. Before You Start Prepare SIM card and key to front panel lock. Steps 1. Wear antistatic gloves. 2.
Mobile Video Recorder (-SD) Quick Start Guide Figure 1-3 SD Card Slot 4. Cover the front panel, and turn the key clockwise to lock the front panel. 1.5 Install Antenna Follow the notice below for antenna installation. Note The installations of 3G/4G and Wi-Fi antennas are only applicable to the device supporting 3G/4G and Wi-Fi. ● ● ● ● Connect antennas to corresponding antenna interfaces. Place antenna vertically with its signal receiving end facing upward.
Mobile Video Recorder (-SD) Quick Start Guide ○ Fix antenna with neutral silica gel. ○ When adjusting the antenna position, ensure that at least 4 satellites have a signal strength above 35 dB. You can go to Location Status interface to view positioning signal status.
Mobile Video Recorder (-SD) Quick Start Guide Chapter 2 Device Wiring 2.1 Power Cord Wiring Warning ● In order to ensure the safety of your automobile and device, a fuse is required for wiring of automobile power and device power. ● Do not connect the power cord to the device before all the cables are connected. 2.1.1 Shutdown Delay The device starts up when your automobile ignites and shuts down after automobile is off.
Mobile Video Recorder (-SD) Quick Start Guide Result Figure 2-2 Shutdown Delay Note ● Contact the automobile manufacturer for the connection information of starting switch. ● The automobile ignition switch, also called car key, controls the startup and shutdown of your automobile. Most of automobiles adopt positive pole ignition switch currently. ● The normal automobile power refers to the main power of the automobile power supply system.
Mobile Video Recorder (-SD) Quick Start Guide Result Figure 2-4 Scheduled Shutdown What to do next Configure parameters of the function. Refer to User Manual for details. 2.2 Alarm Input Connection The device adopts the high/low-level electrical signals triggering (high level: 6 to 36 VDC; low level: 0 to 5 VDC) to realize alarm input. And in order to avoid error report caused by voltage fluctuation, no alarm will be triggered by voltage ranging of 5 to 6 VDC. Figure 2-5 Alarm Input Connection 2.
Mobile Video Recorder (-SD) Quick Start Guide Figure 2-6 Sensor-In Wiring 2.4 Power on Device Connect the device to power supply after all the installations above are finished. You can view the indicators to get knowledge of the device status. Note The indicator types vary with different models. Here the most comprehensive indicators are introduced. ● Power indicator (PWR) ○ Solid green: Device is powered on. ○ Solid red: Device is standby.
Mobile Video Recorder (-SD) Quick Start Guide Chapter 3 Activation For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. The device supports multiple activation methods. In this section, we introduce activation via web browser. 3.1 Default Information Device default IP address and user name are as follows. ● Default IP address: 192.168.1.64 ● Default user name: admin. 3.
Mobile Video Recorder (-SD) Quick Start Guide Chapter 4 Basic Operation 4.1 Login You can get access to the device via web browser. Steps 1. Visit the IP address of the device via web browser. 2. Enter the user name and password. 3. Click Login. Note Follow the installation prompts to install the plug-in before other operations. 4.2 Dial Set the dialing parameters if you want to connect the device to the network via dialing. Before You Start Install SIM card and connect 3G/4G antenna to your device.
Mobile Video Recorder (-SD) Quick Start Guide APN. – To connect the device to general network, you do not need to set dial parameters. Figure 4-1 Set Dial Parameters Note Contact the network operator to obtain the private network dial parameters. 6. Optional: For the special private network needing two sets of dialing parameters, click The default load to set the other set of dialing parameters. 7. Click Save. 8. Optional: Click Wireless Dial-up Status to view dialing status. 4.
Mobile Video Recorder (-SD) Quick Start Guide Steps 1. Go to Configuration → Network → Advanced Settings → Platform Access. 2. Check Enable. 3. Select Platform Access Mode as Ehome Platform. Figure 4-2 Configure EHome Platform 4. Select Server Address Type. – When the server is in extranet, and the IP address is dynamic, you can select Domain Name. – When the server IP address is static, you can select IP Address. 5. Enter Server Address, Server Port, and Device ID.
Mobile Video Recorder (-SD) Quick Start Guide Chapter 5 FAQ 5.1 Why does my device fail to start up after connecting the power? Question Why does my device fail to start up after connecting the power? Answer ● Check power supply specification. ● If PWR indicator is unlit, check power supply and fuse installation. 5.2 Why does my device fail to dial? Question Why does my device fail to dial? Answer ● ● ● ● Check 3G/4G antenna connection. Place 3G/4G antenna away from metal objects.
UD26272N
