Data Sheet

DS-1272ZJ-110
Wall Mounting Bracket for Dome Camera
Features:
 Aluminum alloy material with surface spray
treatment
 Exquisite cable entrance design
 Waterproof rubber blanket for outdoor application
 Convenient installation coordinating with adaptor
Dimension:
Order Model:
DS-1272ZJ-110
Parameter:
Model
Parameters
DS-1272ZJ-110
Wall Mounting Bracket for
Dome Camera
Appearance
Hikvision White
Range of
Application
Dome camera wall mounting
Material
Aluminum Alloy
Dimension
120×122×169mm
Weight
420g
Notice:
 The bracket should be installed on flat wall
 The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
 The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CC51D3S-VPIR, DS-2CC52D5S-VPIR, DS-2CD2112(D)-(I)、
DS-2CD2132(D)-(I)
Installation Step:
① Choose appropriate wall
to install the bracket and
thread the cable
② Fix adaptor to bracket and
thread the cable
③ Screw up and complete
the fixation of adaptor
④ Take off lower dome,
inner module and
lining
A: Cable entry hole
B: Fastening screw
⑤ Complete wiring and fix
dome module to cap
⑥ Fix the dome module and adjust
the angle of view
⑦ Install lining and lower
dome to dome module
and screw up
⑧ Installation complete
Note: The actual bracket may vary from the picture above.
Unit：mm
122
85.7
85.7
120
4-
8.5
83.5
169
5-M4深8