Data Sheet

DS-1271ZJ-110
Pendent Mounting Bracket for
Mini Dome Camera
Features:
 Aluminum alloy material with surface spray
treatment
 Indoor/Outdoor general design
 Internal routed cable design
 Cable entrance is reserved for convenient wiring
indoor
 Better water proof design
Dimension:
Order Model:
DS-1271ZJ-110
Parameter:
Model
Parameters
DS-1271ZJ-110
Pendent Mounting Bracket for Dome Camera
Appearance
Hikvision White
Range of
Application
Suitable for dome camera pendent mounting
Material
Aluminum Alloy
Dimension
Φ150×560mm
Weight
1270g
Notice:
 The bracket should be installed on flat wall
 Waterproof rubber is necessary for outdoor application
 The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
 The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CC51D3S-VPIR, DS-2CD2112-(I), DS-2CD2132-(I)
Installation Step:
① Choose the appropriate
wall to install the ceiling
plate and thread the
cable
② Connect pole and adapter;
thread cable and screw up
③ Screw up and complete the
fixation of adapter and pole
④ Take off lower dome, inner
module and lining
Waterproof rubber is necessary for
outdoor application
A&B: Tightening Screw
⑤ Thread the cable and fix
inner module to
adaptor
⑥ Adjust the view angle of
camera
⑦ Install lining and lower dome
alternatively to inner module
and fix them
⑧ Installation complete.
Note: The figure of Speed Dome in “Installation Step” is only for your reference; please adhere to our real products.