Data Sheet

DS-1259ZJ

Inclined ceiling mount for DS-2CD21XX dome camera

Features:

 Good toughness and strength

 Beautiful design with wire outlet hole

 Coordination with small and nice appearance

 Angle of elevation is increased by 15°

Dimension:

Order model:

DS-1259ZJ

Parameters:

Model

Parameters

DS-1259ZJ

Suitable for DS-2CD21XX series dome cameras

Color

Hik white

Feature

Suitable for DS-2CD21XX series dome cameras

Angle of elevation is increased by 15°

Material

ABS+PC

Dimension

Φ111×39.2mm(Φ4.37’’×1.54’’)

Weight

200g(0.44lbs)

Notice:

 This bracket is only for DS-2CD21XX series dome camera

 Pay attention to the application range when select bracket

 Pay attention to the color matching when select bracket

 The bracket should be installed on flat wall

 The wall must be capable of supporting more than 3 times the total load of

the camera and the mount.

 The maximum load capacity of the mount is 2.0KG

Installation steps:

① Select suitable wall to install the bracket ② Loosen the tightening screw and take down ③ Install the dome core to the gang box,

and wire. the housing. wire and lock the screw.

② Adjust the angle through the 3-axis adjustment ⑤ Install the housing and lock the screws. ⑥ Finish the installation.

structure.

Remark: Appearance of Installation steps is for reference only

PAGE 1
DS-1259ZJ Inclined ceiling mount for DS-2CD21XX dome camera Features: Order model:  Good toughness and strength DS-1259ZJ  Beautiful design with wire outlet hole  Coordination with small and nice appearance  Angle of elevation is increased by 15° Parameters: Model Dimension: Parameters DS-1259ZJ Suitable for DS-2CD21XX series dome cameras Hik white Color Feature Suitable for DS-2CD21XX series dome cameras Angle of elevation is increased by 15° Material ABS+PC Dimension Φ111×39.