DS-1100KI Network Keyboard User Manual V 1.
User Manual of DS-1100KI Network Keyboard Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: • Ensure unit is placed in a well-ventilated, dust-free environment. • Keep all liquids away from the keyboard. • Please check the power supply to avoid the damage caused by voltage mismatch. • Please make sure the keyboard work in the allowed range of temperature and humidity.
User Manual of DS-1100KI Network Keyboard Table of Contents Chapter1 Introduction........................................................................................................................ 3 1.1 Overview .............................................................................................................................. 3 1.2 Features ................................................................................................................................ 3 1.3 Appearance ......
User Manual of DS-1100KI Network Keyboard Chapter1 Introduction 1.1 Overview DS-1100KI Network Keyboard can be used to control the speed dome and the display of decoded video on TV wall, as well as support 1 channel of video view at up to 1080P resolution. It is easy to operate and configure settings. 1.
User Manual of DS-1100KI Network Keyboard 1.
User Manual of DS-1100KI Network Keyboard Chapter2 Keyboard Configuration Note: Please use the user name admin to log in the system for the first time. After keyboard startup, enter the user login interface. Select the user name to admin and input the password of 12345. Click Login to enter the admin main interface. Input method shift: Click the tab on the soft keyboard to enter the interface for inputting the English letters, and the can be used to switch the uppercase/lowercase.
User Manual of DS-1100KI Network Keyboard 2.1 Keyboard Management Click Keyboard on the admin main interface to enter the keyboard management menu. 2.1.1 Network Settings Configure the network settings of the keyboard, including the Port, IP address, Subnet Mask and Default Gateway, and finally click Apply to save the settings. Note: Make sure the DHCP is supported by the router before enabling the function. 2.1.
User Manual of DS-1100KI Network Keyboard 2.1.3 Time Settings Date: Click Time: Click to select the date from the calendar. or to decrease or increase the time value. Click Apply to save the settings. 2.1.4 Language Language: Click to select the option from the drop-down menu. Click Apply to save the setting. 2.1.5 Screen Verify In order to use the touch screen correctly, it needs to be calibrated properly. Click Verify to start the calibration of touch screen positioning.
User Manual of DS-1100KI Network Keyboard Use the touch pen to click the three spots marked as “+” by following the hints and then the system will pop up the attention “Screen verify successfully”, click OK to finish the operation. 2.1.6 Upgrade FTP Upgrade: input the address of the FTP server and then click FTP Upgrade to operate the upgrade. Note: User must create the FTP server connection first by TFTP or WFTP in PC before operating the FTP upgrade. Please refer to Appendix2 for the upgrading.
User Manual of DS-1100KI Network Keyboard If the upgrading is failed, the corresponding error message box will pop up. Note: When the upgrading is successful, the keyboard will restart automatically to complete the upgrade. 2.2 Device Management Click Device on the admin main interface to enter the device management menu. 2.2.1 Add Device Auto Search: Click Auto Search button at the upper left corner to enter the “Device-Auto Search” interface.
User Manual of DS-1100KI Network Keyboard User can also select multiple devices to be added each time. If the adding is failed, in the status bar it will display in . If the adding is successful, it will display in . Note: The devices for bulk adding must have the same user name and password. After having added the devices, click Return to return to the “Device-List Management” interface, where user can view the information of added devices.
User Manual of DS-1100KI Network Keyboard 2.2.2 Modify/Delete Device Modify Device: Click to enter the Modify Device” interface. User is allowed to modify the device name, port, user name and password. Finally, click Modify to modify the device information. Note: The user name and password here refer to that are used for to log in the device from keyboard. Delete Device: Click to delete the added device from the system. 2.3 User Management The keyboard user includes the admin and the operator.
User Manual of DS-1100KI Network Keyboard 2.3.1 Add User Add User: Click Add User to enter the Add User interface. Input the user name, password and verify the password. Finally, click Add to finish the adding of user. 2.3.2 Related Device In the User Management interface, click to enter the “User-Device” interface. Add Device: Click Add Device to enter the “User-Add Device” interface. Select the device and then click the checkbox to add it.
User Manual of DS-1100KI Network Keyboard 2.3.3 Modify User Password and Delete User Modify User Password: In the “User Management” interface, user can click to modify the user password. Delete User: Click to delete the selected user. 2.3.4 Configure File Click Config on the admin main interface to enter the file Export/Import Configuration menu.
User Manual of DS-1100KI Network Keyboard 2.5 Logout Click Logout on the admin main interface, the message box “Logout Now?” will pop up. Click Yes to confirm the logout, or No to cancel the operation. After logout, the system will return to the User Login interface. 2.6 Reboot Click Reboot on the admin main interface, the message box “Are you sure you want to reboot now?” will pop up. Click Yes to confirm the reboot, or No to cancel the operation. 2.
User Manual of DS-1100KI Network Keyboard Chapter3 Keyboard Operation 3.1 Basic Operation In the User Login interface, select the user name (operator) and password, and then click Login to enter the operator main interface. Enter the operator main interface. 3.1.1 Device List Click the Device List on the main interface to enter the Device List menu. The list will display all devices which can be controlled by the current login user.
User Manual of DS-1100KI Network Keyboard 3.1.2 Input Settings Click Input Set on the main interface to enter the Input Settings menu. The list has displayed all device channels which can be controlled by the current login user. Note: The channel name shown in the Monitor Name is obtained from the corresponding channel of device. Modify Monitor: In the “Input Settings-Input List” menu, click to modify the channel name of the device. Note: The monitor No. should be set uniquely from 0 to 9999.
User Manual of DS-1100KI Network Keyboard 3.1.3 Output Settings Click Output Set on the main interface to enter the Output Settings menu. Modify Monitor: In the “Output Settings-Output List” menu, click to modify the channel name of the device. Note: The monitor No. should be set uniquely from 0 to 9999. Output Group: Click Output Group to enter the “Output Settings-Output Group” interface. Click to select the group No. from the drop-down menu. Note: Up to 16 groups can be configured.
User Manual of DS-1100KI Network Keyboard 3.1.4 Macro Settings The macro command can be used for operating a series of continuous actions in sequence. Operation: Press the “Num+MAC” keys to call the programmed macro command. Click Macro Set on the main interface to enter the Macro Settings menu. Add Macro: Click Add Macro to enter the “Macro Setting-Add Macro” interface. Edit the macro name, and press the command keys on the keyboard to enter the text box below.
User Manual of DS-1100KI Network Keyboard 3.1.5 Aux Settings Click Aux Set on the main interface to enter the Aux Settings menu. The Aux Key 1 and Aux Key 2 correspond to the AUX1 and AUX2 keys on the keyboard respectively. The Aux key operation can be set to Voice Talk or Picture Catch. Click to select the Aux function to be realized, and then click OK to save the settings. 3.1.6 Password Settings Click PW Set on the main interface to enter the Password Settings menu.
User Manual of DS-1100KI Network Keyboard 3.1.8 Reboot Click Reboot on the main interface, the message box “Are you sure you want to reboot now?” will pop up. Click Yes to confirm the reboot, or No to cancel the operation. 3.1.9 Shutdown Click Shutdown on the main interface, the message box “Are you sure you want to shut down now?” will pop up. Click Yes to confirm the shutdown, or No to cancel the operation. 3.
User Manual of DS-1100KI Network Keyboard In the any interface or operation status, user can press the SHIFT + LOCK keys to lock the keyboard operation. In the lock status, user can press the SHIFT + LOCK keys to unlock the keyboard operation. Note: the keys will be locked as well when the screen is automatically locked. 3.2.1 Local Preview The local preview operation refers to display the video signal from the input channel through the network keyboard.
User Manual of DS-1100KI Network Keyboard 3.2.2.2 Camera to Monitor The selected input signal can be outputted and displayed by the decoding channel on the monitor. Currently, the supported decoding resolution includes: QCIF, CIF, 2CIF, DCIF, 4CIF, 720p, 1080p, VGA, UXGA, etc. The output interface can be selected to BNC/VGA/HDMI/DVI. Operation: 1. Press the Num + MON keys to select the monitor. 2. Press the Num + WIN keys to select the display window on the monitor. 3.
User Manual of DS-1100KI Network Keyboard 3.2.2.4 Camera Group to Window The video signal from the camera group can be outputted to and displayed on the selected window of monitor in cycle. Note: The default dwell time for the cycle view is 30 sec. Operation: 1. Press the Num + MON keys to select the monitor. 2. Press the Num + WIN keys to select the display window on the monitor. 3. Press the Num + CAM-G keys to select the camera group.
User Manual of DS-1100KI Network Keyboard Operation: 1. Press the SET key to enter the tour settings interface. 2. Press the Num + TOUR keys to set the selected tour. 3. Press the Num + ENTER keys to set the dwell time of the camera and the camera number respectively. 4. Press the SET key to finish the tour settings. Note: The tour settings will not be saved after the keyboard is rebooted. Up to 8 tours can be supported currently.
User Manual of DS-1100KI Network Keyboard Note: 1. The group tour settings will not be saved after keyboard reboot. And if user presses the Num + GROUP keys in the process of setting the group tours, all previous settings will be cleared. 2. Corresponding error message will appear on the screen when user performs wrong operation. 3.2.2.9 Call Group Tour Multiple camera groups can be automatically displayed on related monitors respectively in tour by calling the programmed group tour, e.g.
User Manual of DS-1100KI Network Keyboard Press the key again to restore the normal playback. 2. If the current playback operation has been stopped, it is invalid to press the 3. If is needs to the re-configure the playback time when the selected MON (＋WIN) is in playback mode, user button. should press the STOP key to stop the current playback first and then press the key to enter the playback settings interface.
User Manual of DS-1100KI Network Keyboard Set Preset by Input Channel Operation: 1. 2. 3. Input the Num + CAM keys to select the inputput channel. Operate the joystick to move PTZ to the desired position. Press the Num + PRESET keys to set the current position as the preset with entered number. Note: 1. It is invalid to input the 0+CAM keys in the current operation mode. 2. Corresponding error message will appear on the screen when user performs wrong operation. 3.2.3.
User Manual of DS-1100KI Network Keyboard 3.2.3.4 Set Patrol Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera. Press the SET key on the keyboard and then press PATROL key to enter the patrol settings interface. The user is also allowed to directly select the camera by inputting Num + CAM keys and then press the SET key to start patrol settings. Set Patrol by Output Channel Operation: 4.
User Manual of DS-1100KI Network Keyboard Call Patrol by Output Channel Operation: 4. Input the Num + MON keys to select the output channel. 5. Input the Num + WIN keys to select the display window. 6. Press the Num + PATROL keys to call the programmed pattern. Note: This operation is valid only when the patrol function is supported by the connected camera/dome. Note: Corresponding error message will appear on the screen when user performs wrong operation. Call Patrol by Input Channel Operation: 3.
User Manual of DS-1100KI Network Keyboard Set Pattern by Input Channel Operation: 1. 2. 3. 4. 5. Input the Num + CAM keys to select the input channel. Press the SET key to enter the settings interface. Press the Num + PATTERN keys to set the pattern number. Operate the joystick to control PTZ movement. Press the SET key again to finish the pattern settings. Note: Corresponding error message will appear on the screen when user performs wrong operation. 3.2.3.
User Manual of DS-1100KI Network Keyboard 3.2.4 Aux Functions The keyboard is designed with AUX1 and AUX2 keys on its panel. User is allowed to configure Aux function for AUX1/AUX2 key on the operator user interface. By default settings, the AUX1 is selected to Voice Talk and the AUX2 to Picture Capture function. 3.2.4.1 Voice Talk The voice talk between the keyboard and the currently selected device can be realized through Aux key. Start voice talk with the output channel: 1.
User Manual of DS-1100KI Network Keyboard Note: During the recording, the REC key on the keyboard lights in red. When user exits the operation interface, the recording continues and user is allowed to stop it. When the window is configured with multiple channels for display (in cycle view mode), the error message will appear on the screen. And if the current window or output channel is performing playback by time, then the recording operation is not allowed. 3.2.4.
User Manual of DS-1100KI Network Keyboard Appendix 1: Specifications Model DS-1100KI Control Mode IP-based 7” TFT LCD monitor with touch panel TFT LCD Panel Resolution: 800×480 Joystick 3-axis joystick Audio Input / Output Line In 1-ch, 3.5mm connector (2.0Vp-p, 1kΩ） Audio Out 1-ch, 3.5mm connector (Linear, 600Ω) Network Interface 1 RJ45 10M/100M/1000M adaptive Ethernet interface RS-232 Interface 1 RS-232 interface RS-485 Interface 1 RS-485 interface USB Interface 1, USB2.
User Manual of DS-1100KI Network Keyboard Appendix 2: FTP Upgrade Enable the FTP service on PC and operate the following steps: Step1: Open the wftp software, and then select Security->Users/rights option. Step1: Create new user. Step3: Input the user name: target, password: target, and then click OK to continue. Step4: Select the user name to target. Step5: Input the directory of the upgrade file in the text box of Home Directory, and then click Done to start system upgrading.
