Technical Specs

1
Disassembling the Detector
2
The Printed Circuit Board（PCB）
3
4 5
Installation Hints
6
The 12 m Lens
7
Resistor Wiring
8
Choose the Connection Type
9
Powering up
10
11
Dimension and Weight
(a) Lens (b) LED Light Pipe
(c) Lens Holder
(e) Nut
(d) PCB
(f) Casing Screw
DS-PDD12-EG2
12 m Pet Immune Dual-Tech Detector
(g) Alarm
Resistor Headers
1K, 2K2,
4K7, 5K6, 6K8
(a) PIR Sensor
(f) Terminals
(h) Tamper
Spring
(e) Tamper
Resisitor Headers
1K,2K2,
4K7,5K6
1
1
2
2
3
3
(1) Ceiling Bracket Fing (Non EN compliant) (2) Wall Bracket Fing
(2) Single End of Line Wiring(1) Normally Closed (3) Double End of Line Wiring
99 g
(3.5 oz)
1
2
3
4
The detector has two method for resistor wiring:
(1) Using headers to select the End of Line resistance (Control panel dependent) on the ALARM/TAMPER header pins.
(2) Select an resistance (Control panel dependent), and add the resistor to ALARM/TAMPER wiring ports of the detector.
Note: If EOL (End of Line) wiring is not used, leave the headers OFF. If the headers and the header pins does not match, do not
force the header, please select the method 2 to wire the resistor. Method 1 and method 2 should not be used on the
ALARM/TAMPER at the same me.
Technical Specification
85.9°
(a) Detecon Range
(b) Mounng Height
52 zones
4 planes
Mounng height range from
1.8 m to 2.4 m.
The recommended
mounng height is 2.2 m.
=
=
(a) Alarm
Resistance
(b) Tamper
Resistance
1K,
2K2,
4K7,
5K6,
6K8
1K,
2K2,
4K7,
5K6
©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
It includes instrucons on how to use the Product. The soware
embodied in the Product is governed by the user license agreement
covering that Product.
About this Manual
This Manual is subject to domesc and internaonal copyright
protecon. Hangzhou Hikvision Digital Technology Co., Ltd.
(“Hikvision”) reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, parally or wholly,
by any means, without the prior wrien permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision
and are registered trademarks or the subject of applicaons for the
same by Hikvision and/or its affiliates. Other trademarks menoned
in this manual are the properes of their respecve owners. No right
of license is given to use such trademarks without express
permission.
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Direcve
2014/30/EU, the LVD Direcve 2014/35/EU, the RoHS Direcve
2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot
be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collecon points. For more informaon see: www.recyclethis.info
UD17437B
IC Information
CLASS B: CAN ICES-3 (B)/NMB-3(B)
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject
to the following two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmier by Industry Canada. To
reduce potenal radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut
fonconner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émeeur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l'intenon des autres ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur
et votre corps.
FCC Informaon
Please take aenon that changes or modificaon not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio
frequency energy and, if not ins
talled and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However,
there is no guarantee that interference will not occur in a parcular installaon. If
this equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operaon
a. Alarm Control Panel
a. Alarm Control Panel
b. Detector
b. Detector
a. Alarm Control Panel
b. Detector
Aer powering on, the indicator flashes rapidly. Once the
detector self test is completed, the LED indicator will go
out unl the detector detects movement.
45.5 mm
65.7 mm
103.8 mm
Class B: This device is intended for mainly home use (Class B) and
may be used in all areas
B급 기기: 이 기기는 가정용(B급) 전자파적합기기로써 주로
가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할
수 있습니다.
The connecon shows
the example:
1. Normal: 1K
2. Alarm: 2K
3. Tamper: 0 K or infinite
The connecon shows
the example:
1. Normal: 1K
2. Alarm: Infinite
3. Tamper: 0 K
NOT READY READY
(j) Sensivity Sengs
LOW
AUTO (Default)
HIGH
(i) LED ON/OFF
LED ON
LED OFF
Screw Model
number
PA_3.5 ×25
4
Installation Method - Detector Backplane Installation
Installation Method - Bracket Installation
1K
10m 12m
1m 2m 4m 6m 8m
10m 12m1m
2.4m
2m 4m 6m 8m
10m
12m
1m
2m
4m
6m
8m
ALARMTAMPER
6K8
5K6
4K7
2K2
1K
+-
ALARMTAMPER
EOLEOL
5K6
4K7
2K2
1K
ALARMTAMPER
6K8
5K6
4K7
2K2
1K
+-
ALARMTAMPER
EOLEOL
5K6
4K7
2K2
1K
ALARMTAMPER
6K8
5K6
4K7
2K2
1K
5K6
4K7
2K2
1K
+-
ALARMTAMPER
EOLEOL
ALARMTAMPER
6K8
5K6
4K7
2K2
1K
5K6
4K7
2K2
1K
+-
ALARMTAMPER
EOLEOL
ZONE2
COM
ZONE1 COM
+
-
ALARMTAMPER
+-
6K8
5K6
4K7
2K2
1K
ALARMTAMPER
EOLEOL
5K6
4K7
2K2
1K
ALARMTAMPER +-
6K8
5K6
4K7
2K2
1K
ALARMTAMPER
EOLEOL
5K6
4K7
2K2
1K
ALARMTAMPER +-
6K8
5K6
4K7
2K2
1K
5K6
4K7
2K2
1K
ALARMTAMPER
EOLEOL
ZONE2
COM
ZONE1 COM
+
-
ZONE2
COM
ZONE1 COM
+
-
1K
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS
PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO
YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION,
IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT
TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE
OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION
SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
(d) Microwave Module
(b) AND/OR Mode
(c) Microwave Range Control
Max: 12 m
Medium: 0 to 12 m
Min: 0 m
EN50131-1:2006+A1:2009+A2:2017
EN 50131-2-4:2008
Security Grade 2
Environment class II
(c)
50Hz as default
60Hz remove header
Note:
Brackets are oponal.
Brackets sale separately.
Note: PET immunity is
available up to 12 m and at a
height that is below the top
plane of view.
To use the pet immunity funcon,
please install a pet mask.
Sensivity mode High Auto Low
Weight 5 kg 10 kg 15 kg
PET Table
Detecon range 12m, 85.9°
Detecon speed 0.3 to 2 m/s
Sensivity High, Auto, Low
Auto sensivity Yes
Onboard EOL Yes
Digital temperature compensaon Yes
Technology Digital microprocessor based
SEC technology Yes
Sealed opcs Yes
Creep zone protecon Yes
Direct light filter 6500lux
Tamper protecon Front
LED indicators Green(PIR), Orange(microwave), Blue(alarm)
Microwave frequency
24Ghz (24.1925Ghz to 24.2125Ghz)
Microwave range Potenometer adjustment
AND
/OR mode
PIR / MW
Pet immunity 10Kg (With oponal pet mask)
Power supply 9 to 16 VDC (standard: 12 VDC)
Current consumpon < 15 mA (12 VDC) - Both quiescent and alarm
Operang temperature -10 °C ot 55 °C (14 °F to 131 °F)
Storage temperature -20 °C ot 60 °C (-4 °F to 140 °F)
Operang humidity 10% to 90%
Installaon height 1.8 to 2.4m
Dimension (H × W × D) 103.8 mm × 65.7 mm × 45.5 mm
Weight 99 g
Bracket Oponal wall & ceiling accessory
Low is non EN and non INCERT compliant.