Spec Sheet

Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1

Tel: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.usa@hikvision.com • www.hikvision.com

CB140PT

Conduit Base

• Aluminum Alloy Material with Surface Spray

Treatment

• Waterproof Design

• Bracket Cable Hole for Simple Cable Fitting

The bracket should be installed on a flat wall. The

wall must be capable of supporting a minimum of

three times the total weight of the camera and

mount. The maximum load capacity of the bracket

is 9.92 lbs (4.5 kg).

Available Model: CB140PT

NOTE: See special installation instructions for

select cameras on next page.

Specifications

CB140PT

Appearance

Hikvision w

hite

Material

Aluminum a

lloy

Dimension

5.39" x 2.03"

(

137

51.5

)

Weight

1.16

lbs (

527

)

PAGE 1
CB140PT Conduit Base The bracket should be installed on a flat wall. The wall must be capable of supporting a minimum of three times the total weight of the camera and mount. The maximum load capacity of the bracket is 9.92 lbs (4.5 kg). Available Model: CB140PT NOTE: • Aluminum Alloy Material with Surface Spray Treatment • Waterproof Design • Bracket Cable Hole for Simple Cable Fitting See special installation instructions for select cameras on next page.
PAGE 2
Dimensions Special Installation Instructions for Select Cameras Some cameras require the following steps to install a CB140PT. 1. Twist to remove trim ring from camera mounting base. 2. Loosen the pressure clamp locking screw on the mounting base. 3. Slide pressure clamp away from mounting base. 4. Detach mounting base from camera. 5. Position mounting base on the CB140PT. 6. Align four screw holes on the mounting base to the four inner screw hole posts on the CB140PT. 7.