Spec Sheet

Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1

Tel: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.usa@hikvision.com • www.hikvision.com 030520NA 

CB135

Conduit Base

•

Aluminum Alloy Material with Surface

Spray Treatment

•

Waterproof D

esign

NOTES: Pay attention to color matching and special

installation instructions on back of this sheet

for select cameras.

Available model

CB135

Appearance

Hikvision white

Application

Wire intake box

Material

Aluminum alloy

Dimension

5.39

x 1.65

" (

137 mm x 42 mm)

Weight

9.88 ozs (

0 g)

Dimensions

DimensionsDimensions

Dimensions

NOTE: The actual bracket may vary from the picture above.

PAGE 1
CB135 Conduit Base Appearance Application Material Dimension Weight NOTES: • Aluminum Alloy Material with Surface Spray Treatment • Waterproof Design CB135 Hikvision white Wire intake box Aluminum alloy Ø5.39" x 1.65" (Ø137 mm x 42 mm) 9.88 ozs (280 g) Pay attention to color matching and special installation instructions on back of this sheet for select cameras. Available model CB135 Dimensions NOTE: The actual bracket may vary from the picture above. © 2020 Hikvision USA Inc.
PAGE 2
Special Installation Instructions for Select Cameras Only Some cameras require the following instructions when installing the CB135 (e.g., DS-2CD23x5G1, DS-2CD23x7G1, DS-2TD1217-2/3/6/V1, and others). 1. Twist to remove trim ring from camera mounting base. 2. Loosen locking screw on camera mounting base. 3. Detach camera mounting base from camera. 4. Position camera mounting base on CB135 conduit base. 5. Align four screw holes on the camera mounting base to the four inner screw hole posts on the CB135. 6.