Acoustic Leak Detector User Manual
Acoustic Leak Detector User Manual Legal Information © 2022 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Acoustic Leak Detector User Manual (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Acoustic Leak Detector User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Acoustic Leak Detector User Manual This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. EU/UK Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Directive 2014/30/EU (EMCD), Directive 2014/35/EU (LVD), Directive 2011/65/EU (RoHS).
Acoustic Leak Detector User Manual According to the Waste Electrical and Electronic Equipment Regulations 2013: Products marked with this symbol cannot be disposed of as unsorted municipal waste in the United Kingdom. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Acoustic Leak Detector User Manual requirements. This device complies with Industry Canada licence-exempt。 RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
Acoustic Leak Detector User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Danger Caution Note Description Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Acoustic Leak Detector User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● Use of the product must be in strict compliance with the local electrical safety regulations. Transportation ● Keep the device in original or similar packaging while transporting it. ● Keep all wrappers after unpacking them for future use.
Acoustic Leak Detector User Manual manufacturer. ● The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary. ● For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur. ● Use the battery provided by a qualified manufacturer. Refer to the product specification for detailed battery requirements. ● DO NOT charge other battery types with the supplied charger.
Acoustic Leak Detector User Manual ● Please notice that the current limit of USB 3.0 PowerShare port may vary with the PC brand, which is likely to result in incompatibility issue. Therefore, it’s advised to use regular USB 3.0 or USB 2.0 port if the USB device fails to be recognized by PC via USB 3.0 PowerShare port. ● Your camera will periodically perform a self-calibration to optimize image quality and measurement accuracy.
Acoustic Leak Detector User Manual ● The pollution degree is 2. Technical Support The https://www.hikmicrotech.com portal will help you as a HIKMICRO customer to get the most out of your HIKMICRO products. The portal gives you access to our support team, software and documentation, service contacts, etc. Emergency ● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.
Acoustic Leak Detector User Manual Contents Chapter 1 Overview ........................................................................................................................ 1 1.1 Device Description ............................................................................................................ 1 1.2 Main Function ................................................................................................................... 1 1.3 Appearance ........................................
Acoustic Leak Detector User Manual Chapter 1 Overview 1.1 Device Description The acoustic leak detector is a high-performance device designed for technicians and plumbers to find leaks in plumbing, water service, and residential or commercial properties. It has four ranges of selectable digital bandpass filters, and the amplification is up to 80 dB. Through the filtration and amplification of the sound frequency ranges, the device can help you locate the leakage point accurately.
Acoustic Leak Detector User Manual the App. HIKMICRO Viewer Android HIKMICRO Viewer iOS ● PC: You can connect the device to your PC via a type-C cable, and cast the real-time live view of the device to your PC through the UVC alarm client. 1.
Acoustic Leak Detector User Manual Figure 1-1 Appearance Table 1-1 Button and Interface Description No. Description Function 1 Touch Screen 2 Volume Adjustment Wheel Adjust the headset volume. 3 Reboot Key Press to restart the device. 4 Headset Jack Connect the headset to the device. 5 Sensor Interface Connect the handheld sensor or pick-up sensor to the device. 6 Type-C Interface Charge the device, cast screen or export files with Type-C cable. Show the live view interface.
Acoustic Leak Detector User Manual 9 Neck Strap Mount the neck strap. Attachment Point 10 Adjust the corresponding level according Operational Environment Shift to the frequency range including Indoor Wheel I,Indoor II, Outdoor I, Outdoor II. 11 Mute Key Start/stop receiving the audio signal from the handheld sensor. 12 Mute Key Start/stop receiving the audio signal from the pick-up sensor. Note ● Only when you release the mute key can you see the audio data display.
Acoustic Leak Detector User Manual Chapter 2 Preparation 2.1 Assemble Accessories Note Please assemble the accessories according to the condition. Tighten all the interfaces of the device.
Acoustic Leak Detector User Manual 2.2 Power On/Off 2.2.1 Power On Note Please fully charge the device before you start for the first time. Press to turn on the device. You can detect the leaks when the interface of the device is stable. 2.2.2 Power Off Manual: When the device is turned on, hold for about three seconds to power off the device. Set Auto Power-off Duration: Steps 1,Go to Local Settings → Device Settings → Auto Off 2,Press to set the automatic shutdown time for device as required. 2.
Acoustic Leak Detector User Manual Disable the Standby Mode When the device is in the standby mode, press to wake up the device. 2.4 Swipe-Down Menu In the observation interface, swipe down to call the swipe-down menu. Note Go to Local Settings → Device Settings → Connect also can set the above parameters. Please refer to Chapter 6 for detailed information.
Acoustic Leak Detector User Manual Chapter 3 Display Settings 3.1 Display Appearance Go to Local Settings → Device Settings →Appearance to select the light or dark appearance. 3.2 Set Screen Brightness Go to Local Settings → Device Settings → Display brightness to drag the brightness adjustment bar as required. Note You also can set the screen brightness in the swipe-down menu. 3.3 Display OSD Info Go to Local Settings → Device Settings → Display Settings to enable the information on-screen display.
Acoustic Leak Detector User Manual Chapter 4 Operation Method The acoustic leak detector can detect the leakage points by inspection and quick inspection. 4.1 Quick Inspection You can detect the single leakage point quickly by collecting its audio amplitude. Hearing Protection:when the device receive the :Amplitude display including the line chart, bar chart and the figure. : Adjust the corresponding level according to the frequency range including Indoor I,Indoor II, Outdoor I, Outdoor II. 4.
Acoustic Leak Detector User Manual Analyze all the points which has completed the collection and the suspect leakage point will be marked in red.
Acoustic Leak Detector User Manual Chapter 5 Cast Screen You can connect the device to your PC via a type-C cable, and cast the real-time live view of the device to your PC through the UVC alarm client. Then you can synchronously view the live view and parameters such as the maximum temperature, the distance, and the emissivity on your PC. Before You Start Download the UVC Alarm Client from HIKMICRO official website, and install the client on your PC.
Acoustic Leak Detector User Manual Chapter 6 HIKMICRO Viewer APP Connection The device supports both Wi-Fi connection and hotspot. Connect the device to HIKMICRO Viewer, and you can control the device via mobile client. 6.1 Connect via Wi-Fi Before You Start Download and install HIKMICRO Viewer on your phone. Steps 1. Select from the main menu. 2. Go to Local Settings → Connect → WLAN. 3. Tap to enable Wi-Fi, and the searched Wi-Fi will be listed. 4. Select the Wi-Fi to connect to.
Acoustic Leak Detector User Manual 6.2 Connect via Hotspot Before You Start Download and install HIKMICRO Viewer on your phone. Steps 1. Select from the main menu. 2. Go to Local Settings → Connect → Hotspot. 2. Tap to enable the hotspot function. The hotspot name is the last 9 digits of the device serial No. 3. Tap Set Hot Spot. A soft keyboard is displayed. 4. Set the password for the hotspot. Note ● DO NOT tap enter or space, or the password may be incorrect.
Acoustic Leak Detector User Manual Chapter 7 Maintenance 7.1 View Device Information Go to Local Settings → Device Information to view the device information. 7.2 Set Date and Time Date Steps 1. Go to Local Settings → Device Settings → Time and Date to calibrate the date. 2. Swipe down/up the parameters to select the target date. 3. Press to save and exit. Time Steps 1. Go to Local Settings → Device Settings → Time and Date to calibrate the time. 2. Select the 24-hour or the 12-hour mode. 3.
Acoustic Leak Detector User Manual 3. Disconnect the device from your PC. 4. Reboot the device and go to Local Settings → Device Settings. Tap the icon of the upgrade file and then the device will reboot automatically. The upgrading process will be displayed in the main interface. Note After upgrading, the device reboots automatically. You can view the current version in Local Settings → Device Settings →Device Information. 7.
Facebook: HIKMICRO Thermography LinkedIn: HIKMICRO Instagram: hikmicro_thermography YouTube: HIKMICRO Thermography E-mail: info@hikmicrotech.com Website: https://www.hikmicrotech.