Power Cable Wiring: Three colors: red, black and yellow: Red - Ignition Switch (ACC) Yellow - 12V battery positive Black - 12V battery negative Note: the yellow wire is memory wire, so please confirm it is well connected to keep setting memory. Speaker Cable Wiring: Four colors: white, grey, purple and green. Each color is one group, two cables. One group connects to one speaker.
Camera Wiring (Optional): 1. Power cable: red and black. Red - positive reversing light Black - negative reversing light 2. RCA cable: yellow port. insert it into the port '' CAM-IN '' (yellow) of the radio 3. Make sure the ''parking sensor control wire'' on the radio's power cord is connected to the reversing light positive wire. After connection, when you are parking, the device will display the rear view image automatically and when the parking is over, you will return to the radio page.
TROUBLE Shooting: We care every customer's experience in using our product, so we tested every device and make sure that they can really work well before we ship it out. 1. No power (1) Please confirm the power source is DC 12V. (2) Please only use the power wires coming with the radio. (3) Check if you connect all power cables (red to ACC, yellow to battery positive, black to battery negative) correctly and ports tightly. (4) Check if the fuse is good. Replace the proper value fuse if necessary.
save, until the original station changes into the current station. 11. Mirror Link Function doesn’t work. (1) This device only support Android phones with Android system 4.0-7.0 and iPhone 5-7 Plus to mirror the phone screen on the radio, but cannot support other device so far. (2) Please use the original USB data cable to connect, because this function is strict with the quality of the USB cable. (3) You can try another phone to test if it is because your phone doesn’t not in compatibility. 12.