RocketU 1122 Host Controller Quick Installation Guide V1.00 Jun.
Table of Contents HighPoint RocketU 1122 ......................................................... 3 Kit Contents ............................................................................ 3 Board Layout ........................................................................... 4 Installing the RocketU Series Host Adapter ............................ 5 h^ ϯ͘Ϭ Driver Installation (Microsoft Windows).................... 5 Connecting USB Storage Devices ............................................
HighPoint RocketU 1122 Upgrade any PC with Dual-Dedicated 5Gb/s USB 3.0 Performance! HighPoint’s RocketU 1122 HBA is the industry’s fastest dual-port USB 3.0 HBA. Unlike ordinary 2-port USB cards, the RocketU 1122 was designed specifically for high speed storage devices – each port is powered by a dedicated 5Gb/s USB 3.0 controller for maximum performance. The RocketU 1122’s 10Gb/s transfer bandwidth is ideal for high-speed SATA SSD’s, and is the perfect USB 3.
Kit Contents RocketU 1122 Host Controller Software CD Quick Installation Guide Low Profile Bracket Board Layout RocketU 1122 PCB board Layout RocketU 1122 4
Installing the RocketU Series Host Adapter Note: Make sure the system is powered-off before installing the RocketU series host adapter. 1. Open the system chassis and Locate an unused PCI-Express x4 (×8 and ×16) slot. 2. Remove the PCI-Express slot cover. 3. Gently insert the RU series into the PCI-Express slot, and secure the bracket to the system chassis. 4. After installing the adapter, attach the hard disks or disk enclosure to the RU series card using the USB cables. 5.
\RocketU\RU1022x_112x_114x\Windows 7. You can click the Setup.exe icon in the driver folder to install RocketU 1122 driver automatically. Note: ASMedia ASM1042x driver was embedded into Windows 8 OS. Verify Installation of the Software 1. On the Start menu, select 'Control Panel'. 2. Open on the 'System' applet (You may first have to select 'Switch to Classic View'). 3. Select the 'Hardware' tab 'Device Manager' button. 4. For Windows OS: expand the 'Universal Serial Bus Controllers' entry.
Connecting USB Storage Devices 1. Make sure the RocketU 1122 has been installed into your PC. 2. Connect the USB device to the HighPoint RocketU HBA with USB 3.0 cables. 3. Allow the drives/enclosure to spin up for a few moments. Once the devices are ready, they will be recognized by the operating system and can be accessed as needed. Customer Support If you encounter any problems while utilizing the RocketU series host adapter, or have any questions about this or any other HighPoint Technologies, Inc.
FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.