User Manual

ManualsBrandsHigh-Flying Electronics Technology ManualsElectronicsZigbee Module

HF-Z100 ZigBee Module User Manual

Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) -1-

HF-Z100

ZigBee Module User Manual

V1.2

TABLE OF CONTENTS

LIST OF FIGURES

.................................................................................................................................................

LIST OF TABLES

...................................................................................................................................................

HISTORY

.................................................................................................................................................................

1. PRODUCT OVERVIEW

............................................................................................................................

1.1. General Description

...............................................................................................................................

1.2. Device Features

......................................................................................................................................

1.3. Device Paremeters

.................................................................................................................................

1.4. Key Application

.......................................................................................................................................

2. HARDWARE INTRODUCTION

..............................................................................................................

2.1. Pins Definition

.........................................................................................................................................

2.2. Electrical Characteristics

.......................................................................................................................

2.3. Mechanical Size

......................................................................................................................................

2.4. Antenna

....................................................................................................................................................

2.5. Evaluation Kit

..........................................................................................................................................

2.6. Order Information

.................................................................................................................................

2.7. Typical Application

...............................................................................................................................

3. PACKAGE INFORMATION

...................................................................................................................

3.1. Recommended Reflow Profile

............................................................................................................

3.2. Device Handling Instruction (Module IC SMT Preparation)

..........................................................

3.3. Shipping Information

............................................................................................................................

APPE NDI X A: HW RE FERE NCE DE SIGN

...............................................................................................

APP ENDI X B: CON TAC T IN FORM ATI ON

................................................................................................

Summary of content (16 pages)

PAGE 1
HF-Z100 ZigBee Module User Manual HF-Z100 ZigBee Module User Manual V 1.2 TABLE OF CONTENTS LIST OF FIGURES.................................................................................................................................................2 LIST OF TABLES................................................................................................................................................... 2 HISTORY.....................................................................................
PAGE 2
HF-Z100 ZigBee Module User Manual LIST OF FIGURES Figure 1. HF-Z100 Overview............................................................................................................................. 5 Figure 2. HF-Z100 Pins Map............................................................................................................................. 5 Figure 3. HF-Z100 Mechanical Dimension......................................................................................................
PAGE 3
HF-Z100 ZigBee Module User Manual 1. PRODUCT OVERVIEW 1.1. General Description The HF-Z100 is a fully self-contained, small form-factor, IEEE802.15.4 Zigbee modulewith low complexity, self-organizing, lowpower, low cost feature.It is based on IEEE802.15.4 standard, can be coordinated toachieve communication between the thousands of tiny sensors that require very littleenergy to relay the data through radio waves from one sensor to another sensor, thus withhigh communication efficiency.
PAGE 4
HF-Z100 ZigBee Module User Manual 1.3. Device Paremeters Table 1. HF-Z100 Module Technical Specifications Class Wireless Parameters Item Parameters Certification Wireless Standard Radio Data Rate Frequency Range Transmit Power ReceiverSensitivity FCC/CE 802.15.4 250Kbps@2.4GHz 2.4~2.4835GHz 9 +/-1.5dBm ≤-101dBm External: PAD or Through Hole for external ANT Internal:On-board Chip ANT UART,ADC,DAC SPI,I2C,GPIO 2.0~3.
PAGE 5
HF-Z100 ZigBee Module User Manual 2. HARDWARE INTRODUCTION Figure 1. HF-Z100 Overview Figure 2. HF-Z100 Pins Map 2.1. Pins Definition Table 2. HF-Z100 Pins Definition Pin 1~2 Net Name GND Describtion Ground 3 GPIO12 PWM output-1 (Timerl) 4 GPIO13 PWM output-2 (Timerl) 5 GPIO14 SWD Clock 6 GPIO15 SWD Data 7 GPIO16 IIC SDA 8 VIO IO Power (2.0~3.6V) Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
PAGE 6
HF-Z100 ZigBee Module User Manual Pin 9 Net Name GPIO17 Describtion IIC CLK 10 GPIO18 PWM output-3 (Timerl) 11~13 GND Ground 14 GPIO21 UART2_TXD 15 GPIO22 UART2_RXD 16 GPIO23 PWM output-4 (Timerl) 17 GND Ground 18 VBAT Main Power (2.0~3.6V) 19 GND Ground 20 GPIO29 Reserve 21 GPIO28 Enable 22 GND Ground 23 RESET_N The reset signal 24 GPIO4 25 GPIO5 ADCx3 or ADCx1 And Wakeup INTx2 26 GPIO6 27 GND Ground 2.2. Electrical Characteristics Table 3.
PAGE 7
HF-Z100 ZigBee Module User Manual Figure 3. HF-Z100 Mechanical Dimension 2.4. Antenna HF-Z100 module support internal on-board chip antenna and external wire antenna option.Wire antenna is flexible to avoid the metal affect or the other on RF performance in LED lighting because it isnot fixed on board like chip antenna and can be go out externally.
PAGE 8
HF-Z100 ZigBee Module User Manual Figure 4. HF-Z100 Suggested Wire Antenna Position Figure 5. HF-Z100 through hole PAD Position The through hole PAD Position: X: 95mil; Y: 91.5mil; Dia.: 35.43mil Figure 6. HF-Z100 with Chip Antenna Suggested Placement Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
PAGE 9
HF-Z100 ZigBee Module User Manual 2.5. Evaluation Kit High-Flying provides the evaluation kit to promote user to familiar the product and develop the detailed application. The evaluation kit shown as below, user can connect to HF-Z100 module with the UART (USB), or SWD Debugger port to configure the parameters, manage the module or do the some functional tests. Figure 7. HF-Z100 Evaluation Kit Notes: User need consult high-flying for software SDK support or more detailed debug support.
PAGE 10
HF-Z100 ZigBee Module User Manual 2.6. Order Information Base on customer detailed requirement, HF-Z100 series modules provide different variants and physical type for detailed application. Figure 8. HF-Z100 Order Information 2.7. Typical Application The module basic reference schematic is referred to following, Figure 9. HF-Z100 Hardware Typical Application Notes: If HF-Z100 GPIO6 (RXD) and GPIO4 (TXD) are not used for ADC and Wakeup function, suggestusing them as the default UART download port.
PAGE 11
HF-Z100 ZigBee Module User Manual 3. PACKAGE INFORMATION 3.1. Recommended Reflow Profile Figure 10. Reflow Soldering Profile Table 6. Reflow Soldering Parameter NO. Item Temperature (Degree) Time(Sec) 1 2 Reflow Time Peak-Temp Time of above 220 260 max 35~55 sec Note: 1. Recommend to supply N2 for reflow oven. 2. N2 atmosphere during reflow (O2<300ppm) 3.2. Device Handling Instruction (Module IC SMT Preparation) 1. 2.
PAGE 12
HF-Z100 ZigBee Module User Manual TAPE BOX Size: 340*340*70 mm Size: 340*340*350 mm (inside) Figure 11. Shipping Information To Be Update Note: 1 tape = 500pcs 1 box = 5 tapes = 5 * 500 pcs = 2500pcs Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
PAGE 13
HF-Z100 ZigBee Module User Manual APPENDIX A: HW REFERENCE DESIGN Detailed HF-Z100 Evluation Board design source files, pls access High-Flying web download page or contact with High-Flying technical support people to acquire. Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
PAGE 14
HF-Z100 ZigBee Module User Manual APPENDIX B: CONTACT INFORMATION -----------------------------------------------------------------------------------------------------------Address: Room.511/510, Building 7, No.365, Chuanhong Road,Pudong New Area, Shanghai, China, 201202 Web:www.hi-flying.com Service Online: 400-189-3108 Sales Contact: sales@hi-flying.
PAGE 15
FCC INFORMATION (USA) FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 16
digital device emissions, PC peripheral requirements, etc.). The end-product may need Verification testing, Declaration of Conformity testing, a Permissive Class II Change or new Certification. Please involve a FCC certification specialist in order to determine what will be exactly applicable for the end-product.