HF-LPB125 Low Power Wi-Fi Module User Manual HF-LPB125 Low Power Wi-Fi Module User Manual V 1.0 Overview of Characteristic Support IEEE802.
HF-LPB125 Low Power Wi-Fi Module User Manual TABLE OF CONTENTS LIST OF FIGURES.................................................................................................................................................3 LIST OF TABLES.................................................................................................................................................. 4 HISTORY....................................................................................................................
HF-LPB125 Low Power Wi-Fi Module User Manual LIST OF FIGURES Figure 1. HF-LPB125 Pins Map........................................................................................................................ 8 Figure 2. HF-LPB125 Mechanical Dimension.............................................................................................. 10 Figure 3. HF-LPB125 Order Information....................................................................................................... 11 Figure 4.
HF-LPB125 Low Power Wi-Fi Module User Manual LIST OF TABLES Table 1 HF-LPB125 Module Technical Specifications.................................................................................7 Table 2 HF-LPB125 Pins Definition................................................................................................................ 8 Table 11 Reflow Soldering Parameter............................................................................................................
HF-LPB125 Low Power Wi-Fi Module User Manual HISTORY Ed. V1.0 03-02-2016 First Version. Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
HF-LPB125 Low Power Wi-Fi Module User Manual 1. PRODUCT OVERVIEW 1.1. General Description The HF-LPB125 is a fully self-contained small form-factor, single stream, 802.11b/g/n Wi-Fi module, which provide a wireless interface to any equipment with a Serial/SPI interface for data transfer.
HF-LPB125 Low Power Wi-Fi Module User Manual 1.1.2 Device Paremeters Table 1 Class Wireless Parameters HF-LPB125 Module Technical Specifications Item Parameters Certification Wireless standard Frequency range FCC/CE 802.11 b/g/n 2.412GHz-2.462GHz 802.11b: +16 +/-2dBm (@11Mbps) 802.11g: +14 +/-2dBm (@54Mbps) 802.11n: +13 +/-2dBm (@HT20, MCS7) 802.11b: -93 dBm (@11Mbps ,CCK) 802.11g: -85 dBm (@54Mbps, OFDM) 802.
HF-LPB125 Low Power Wi-Fi Module User Manual 1.2. Hardware Introduction 1.2.1. Pins Definition Figure 1. HF-LPB125 Pins Map Table 2 HF-LPB125 Pins Definition Describtion Net Name 1 2 3 +5V Power Ground UART0 DVDD GND UART0_RX Signal Type Power Power I,PU 4 UART0 UART0_TX O,PU 5 Multi-Function nReload I,PU 6 7 Module Reset GPIO EXT_RESETn GPIO5 I,PU I/O 8 GPIO GPIO6 I/O Pin Comments 5V@250mA 5V, GPIO19. No connect if not use. 5V, GPIO20. No connect if not use. 3.3V, GPIO2.
HF-LPB125 Low Power Wi-Fi Module User Manual Module Pin4 must be high when bootup. nReload Pin (Button) function: 1. When this pin is set to “low” during module boot up, the module will enter wireless firmware and config upgrade mode. This mode is used for customer manufacture. (See Appendix D to download software tools for customer batch configuration and upgrade firmware during mass production) 2.
HF-LPB125 Low Power Wi-Fi Module User Manual 1.2.3. Mechanical Size HF-LPB125 modules physical size (Unit: mm) as follows: Figure 2. HF-LPB125 Mechanical Dimension Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
HF-LPB125 Low Power Wi-Fi Module User Manual 1.2.4. Order Information Base on customer detailed requirement, HF-LPB125 series modules provide different variants and physical type for detailed application. Figure 3. HF-LPB125 Order Information 1.3. Typical Application Refer to HF-LPB120 user manual for detailed application and module usage. Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.
HF-LPB125 Low Power Wi-Fi Module User Manual 2. PACKAGE INFORMATION 2.1. Recommended Reflow Profile Figure 4. Reflow Soldering Profile Table 11 Reflow Soldering Parameter NO. Item 1 Reflow Time 2 Peak-Temp Temperature (Degree) Time of above 220 Time(Sec) 35~55 sec 260 max Note: 1. Recommend to supply N2 for reflow oven. 2. N2 atmosphere during reflow (O2<300ppm) 2.2. Device Handling Instruction (Module IC SMT Preparation) 1.
HF-LPB125 Low Power Wi-Fi Module User Manual 2.3. Shipping Information(TBD) BOX TAPE Size: 340*340*70 mm Size: 340*340*350 mm (inside) Figure 5. Shipping Information Note: 1 tape = 500pcs 1 box = 5 tapes = 5 * 500 pcs = 2500pcs FCC STATEMENT: This device complies with Part 15 of the FCC Rules.
HF-LPB125 Low Power Wi-Fi Module User Manual by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
HF-LPB125 Low Power Wi-Fi Module User Manual End product labeling: The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2ACSVHF-LPB125”. Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.
HF-LPB125 Low Power Wi-Fi Module User Manual APPENDIX E: CONTACT INFORMATION -----------------------------------------------------------------------------------------------------------Address: Room 1002,Building 1,No.3000,Longdong Avenue,Pudong New Area,Shanghai,China,201203 Web: www.hi-flying.com Service Online: 400-189-3108/18616078755 Sales Contact: sales@hi-flying.