USER MANUAL Upgraded 7”Standard Car Stereo Important ! Test before Installation
Customer service: We have done our best to deliver a high-quality product and we’ll continue doing so, Hieha does not recommend to install the product yourself. We recommend having it professionally installed by a certified professional. If you decide to install the unit by yourself please do read the user manual carefully and follow the installation steps.
REAR INTERFACE DESCRIPTION REAR INTERFACE DESCRIPTION CVBS input Fuse 10A~15A Video output 1 Radio antenna Left audio output Reversing video input Right audio output Video output 2 3
Test Step2 A quick simple test before the installation is to confirm that the device is working normally and as expected. In case there is a wrong step in the subsequent installation, which causes it to fail to work. If you perform a successful test but the unit did not work after installing it please recheck the installation steps. Test rear view camera: Holding the Step 1 connection.
Full show of the Realistic connection photo: ④ WIRE CONNECTION ① Yellow wire connect to the positive of car power ② Black wire connect to the GND (Ground wire B-) of the car power. Connect together ed r ① ⑤ ② Connect together and connected to the positive pole of the battery d Connect together and connected to the negative pole of the battery + - ④ Black Red wire connect to the ③ ACC(lgnition Switch) ⑥ + ⑤ d Re ed R re ⑥ - black ( Installation: Note: 1.
MACHINE INSTALLATION CARPLAY FUNCTION The size of this car stereo is universal, suitable for most cars, and can be easily installed by following the steps below. But if you find that the unit is not suitable for your car, please consider these four methods. You may need three aftermarket accessories to complete your installation: · Double DIN dash kit for (your car model). · Wire harness (Connects car wiring to stereo wiring) for (your car model). · Antenna adapter for (your car model).
Mirror Link Function: Note: This function allows your mobile phone to directly project the screen to the car stereo, so it is called the mirror link function. But this function is not suitable for phones which with too high resolution and version. For example, the mobile phone with the following three conditions. 1.Phone resolution is above (1920*1080) 2.Iphone X or higher version 3.Android 10.1 or above Confirm your phone ① 1.If it is Mobile phones that fall into the above three conditions .
— 4.Mirror Link for IPhone — 4.Mirror Link for Android Note: Note: If your phone is Iphone X or above the phone link function won't work. 1.Only when the display mode of the phone is on” landscape”, then the display of the car stereo can be displayed in full screen. 2. Bluetooth must be connected, then the audio on the mobile phone can be synchronized to the car stereo. 3. When the phone screen is turned off, the display of the car stereo will also be turned off at the same time.
2. Find the "About phone" and click Enter. Click on the "Build number" continuously until the phone screen displays "You are already a developer". 14 3. Go back to the "System" interface, find "Developer options", and click Go to find "USB debugging" and turn this feature on.
4.Connect the phone and the car stereo with the USB cable, and the dialog box "Allow USB debugging" will pop up on the phone. Click the "OK" button. FUNCTIONAL DESCRIPTION 1 2 3 4 5 7 8 9 10 11 6 1.RADIO: Touch to enter the radio mode to listen to the radio station. 2.Bluetooth: Touch to enter Bluetooth mode. 3.Music: Insert U Disk to play. 4.Movie: Insert U Disk to play. 5.Photo: Insert U Disk to play. 6.Folder: Mange your file. 7.
Bluetooth Status: the white color of the BT icon indicates that it is not connected, and the blue one means it is connected. the function can check if Bluetooth is connected. Screen Mode: Day mode - Night mode - Off screen mode. Notice: If your car stereo turns off suddenly, you may have accidentally touched this icon.
20 21
23 24
1.Mobile phone automatic: This switch can choose to communicate with the phone as: Auto Play/A-Link/OFF. 2.Carplay rudder: This switch can set the Carplay rudder to the left or right. 3.Parking Video Disp: Normally this switch is set to OFF, otherwise the machine will pop up a warning when you watch the video, prompting you not to watch the video while driving. 4.Camera mirror: This switch can set the rear camera mirror to the OFF or ON. 5.
27 28
2> Automatic shut-down --- Automatic shutdown is generally caused by the following situations: 1.The cable were connected wrong: If the blue cable (automatic antenna power supply) is connected as the power cord of the unit, an automatic shutdown will occur. Please follow the correct wiring connection method to solve the problem. 2.The voltage is unstable: please find a 12V-5A power supply and re-tested to see if it will automatically shut down or not.
10> FM does not receive the radio station -- Can not receive the station check below 2 points 1.The antenna plug is not fully inserted, the antenna is disconnect or the line is disconnect. 2.Search channel, on the FM menu page, perform a channel scan search. If the above 2 points don’t work, please unplug the antenna plug and find a screwdriver or a metal strip to insert into the antenna port to see if it works or not.