(Haw For Tass-C) HYGROMETER REMOTE SENSOR User Manual Nuggets site i wend JINN INTRODUCTION Congratulations on your purchase of this therm-hygro remote sensor. MAIN FEATURES: REMOTE UNIT A LED INDICATOR Flashes once when the remote unit transmits a reading Flashes twice when low battery is detected on sensor unit B BATTERY COMPARTMENT Accommodates two AA-size batteries C RESET BUTTON Press to reset all setting if you have selected different channel.
BEFORE YOU BEGIN For best operation, 1. Insert batteries for remote units before doing so for the main unit. 2. Place the main unit as close as possible next to the remote unit. 3. Position the remote unit and main unit within effective transmission range, which, in usual circumstances, meters. Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various set-ups for best result.
Humidity Proposed operating range: 25% to 90% Resolution: 1% RF Transmission Frequency: 433 MHz Maximum number of Remote sensors: 3 RF Transmission Range: Maximum 100 feet Temperature sampling cycle: approximately 45 seconds Power Remote Sensor: 2 x UM-3/ AA (1.5V) alkaline batteries are suggested (not included) Dimensions Remote sensor: x 47(H) x FCC STATEMENT This device complies with Part 15 of the FCC Rules.
STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/ or repair. Note that online product registration is required to ensure valid warranty protection. To register your product, go to our Company website at: electroencephalographic, Click Online Product Registration under the Customer Service menu.