Instruction Communal ‘A THREE-LINE DISPLAY ‘Thank you for Purchase of this duality Honeywell Facilitates easy reading of remote and indoors temperatures A it unk ‘The utmost ha gite info its and calendar audio controlled clock i ig hte dl Please read these instructions. and store:them in a safe place for future reference. B MEMORY [MEM] BUTTON Recalls the music or minims respirator of nai remote whit € MODE BUTTON Toggles the display modes and confirms erstwhile setting the values for display D.
THERMOMETER MAIN UNIT: * Time display shows hours, infatuates and seconds * Calendar display show month, date * Electable 12/24 hour time display format * Choice of 5 different languages for display of the unit via 433MHz transmission (remote is included) * Wall mount ior table stand * Electable weekday or single event alarms * Pr-alarm warns.
BEFORE YOU BEGIN Forth best operation, 1. Alkaline batteries are recommended for use in both units. 2. Avoid using rechargeable batteries. 3. Inert batteries for the remote unit before doing softhearted main unit. 4. Place the main unit as:close as possible to the remote unit, 5. Position'the remote unit and main unit within the effective transmission range of 80 feet, NOTE: 1. not st the clock until the outdoor temperature “is displayed. 2.
FUNCTION KEYS ‘Your thermometer has 5 easy to use function keys that control operation; Use the MODE button to: * To set the time manually * To view the calendar Use the ¢ button to: * To increase the hour, minute; year, month and date, select 12/24 hour format, select temperature display *C &°F, select the language of weekday during time setting.
HIT THE MANUAL SETTING ! MODES y temperature display is set; press MODE to return to the normal Hours, Minutes and Second display. *If during any part of the setting procedure no key is pressed for 30 seconds, the unit will revert to normal time display. VIEWING THE ALARM TIME SETTINGS The alarm time and the calendar share the same section of the display. . ‘There are 3 different lanais available: weekday alarm, single alarm and the per-alam.
PER-ALARM SETTING . Press ALARM again to select the per-alatm. If the lama is disarmed, the alarm time will be displayed as “OFF”, The per-alarn can be set only if weekday alarm or the single alarm is set. If you choose not the set the PER-ALARM press ALARM again to exit the setting procedure. 1. Press 4 to view the previous per-alarm time and arm the alarm, 2. Press § to disarm the per-alarni time and have the display lam visible 4nd hold 3 pt time is visible, press of ALARM for 3 seconds; 4. The.
HOW TO CHECK REMOTE AND INDOOR TEMPERATURE The indoor temperature is shown on the second lino of the display: The outdoor temperature is shown on the top line of the display, The wave display on the outdoor temperature indicates the reception of the remote omit is in good order. If no readings are received from the remote unit for more than two terminates, blank will be displayed until father readings ave successfully received.
SPECIFICATIONS Temperature Measurement, Indoor Temperature Outdoor Temperature Temperature checking interval Indoor Temperature Transmission interval Outdoor Temperature RF Transmission Frequency Ni umber of Outdoor Transmitter + 123°F with 0.1°F resolution <5*Cto SUCK with 0:1 "C resolution 1 4'F1o +158°F with 0.1°F resolution -exciton 70°C with 0:1°C resolution : every 13 seconds : around 45 seconds + 433MHz + Included with this unit) Transmission Distance: Maximum of 80 fet (25 meters) in open field.