User Manual Hideez Key 4 Full User Manual here https://support.hideez.com/ First installation and launch Hideez Key 4 — First installation on Windows 10 with a dongle Note: If you are going to use Hideez key without Hideez USB Bluetoth dongle, please use the following instructions. Step 1: Install and Launch Hideez Client Download the latest version of Hideez Client here. Run the downloaded file and go through the installation steps.
The installation will take about a minute. When finished, click the Launch button.
Step 2: Press the button on the Hideez Key and insert the dongle To activate the Hideez key, press the button. Insert the dongle into a USB port. Avoid using a USB hub, if possible. Possible issues: Hideez Key is not activated - please try replacing the battery. If your Hideez Key is already activated (the LED lights up), just skip this step.
Check the Dongle indicator at the bottom of the application window - it should be green. Possible issues: The indicator is red - try pulling out and re-inserting the dongle or choosing a different USB port. Step 4: Tap the dongle with the Hideez Key You need to touch the dongle with the Hideez Key for 1-2 seconds. Step 5: Confirm Pairing (One-Time Procedure) When you connect Hideez Key to your computer for the first time, you need to go through the pairing procedure: press the button that flashes green.
You can subsequently change the master password according to this instruction. It is impossible to recover a forgotten master password! You can only clear all data from your Hideez Key. Step 7: Access the password manager Read the instructions for creating and managing accounts.
Create and manage an account to unlock your PC Hideez Key 4 — Create and manage an account to unlock PC If you want to use Hideez Key not only to enter credentials into applications, but also to unlock your PC, you need to add a Primary account - an account for unlocking your PC. Such an account can only exist in a single copy. Create an account to unlock your PC Go to the Vault settings section (1) > Lock and Unlock block (2), check the Use this device to Unlock the PC checkbox (3).
Editing an account to unlock a PC You can edit the account from the Password manager section or from the Vault settings section. Navigate to the Lock and Unlock block and click the Edit Password button. Enter a new password and save your changes.
Create an account for sites and applications Hideez Key 4 — Create an account for sites and apps Click the "+" sign at the bottom of the page to create an account. OR use a shortcut Ctrl + Alt + A to open a window for adding an account from an application or site. In this case, the account name and application / site fields will be prepopulated and can be edited.
• • • • Account name - any name that is convenient and understandable for you Login - the login used to get into the account Password - the password used to get into the account. You can enter it manually or generate it by clicking the icon at the end of the line. If you generate a password, be sure to update it on your existing account. Web-site / app - The addresses of the websites where this account can be used and the names of the applications. Click the Add Web-site button to add a website address.
Use the drop-down list to select one of the addresses you used previously, or to enter a new one. After entering the address, press 'Enter' or the icon to save it, or to delete it. An unlimited number of website addresses can be added. You can delete or edit them by hovering over the address line and clicking the corresponding icon. - click the Add application button to add an application and select one from the list of applications running on your computer.
Manufacturer's Name: Minewing (Shenzhen) Electronics Integrated Co., Ltd Hideez Key 4 Model number: ST104 Operating Temperature: 0° C to 40° C This device was tested for typical body‐worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third‐party belt‐clips, holsters, and similar accessories used by this device should not contain any metallic components.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.