9292 Jeronimo Road Irvine, CA 92618-1905 HID® FlexSmart™ 609X Series Readers INSTALLATION GUIDE © 2007 HID Global Corporation. All rights reserved. February 1, 2006 Document Number 6090-900 Document Version A.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 Contents 1 Overview .......................................................................................................................... 3 1.1 Introduction ........................................................................................................... 3 1.2 Parts Included ....................................................................................................... 3 1.3 Specifications ..............................
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 1 1.1 Overview Introduction The HID® FlexSmart™ 609X series are RFID card readers based on MIFARE® smartcard technology. They are encapsulated units designed to attach to a single-gang electrical box, suitable for both indoor and outdoor use. Data is output in either Wiegand or ABA track 2 (magstripe) formats, and is application dependent. Electrical connection is made via a 6-way detachable screw terminal block.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 2 Mounting Figure 2-1 – Overall Dimensions Figure 2-2 – Back Plate Dimensions Page 4 of 9 February 1, 2007 © 2007 HID Global Corporation. All rights reserved.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 Figure 2-3 – Attaching Backplate Figure 2-4 Install Reader February 1, 2007 Page 5 of 9 © 2007 HID Global Corporation. All rights reserved.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 Figure 2-5 – Fascia Label 3 3.1 Wiring Cable Types and Maximum Lengths The 609x series readers require a minimum supply voltage of 9.0 VDC at the reader. Voltage drops, caused by the cable resistance, can be compensated by increasing the power supply voltage, provided the maximum supply voltage (16.0 VDC) is not exceeded at the reader. CAUTION: THE READER SUPPLY VOLTAGE MUST NOT EXCEED 16.0 VDC.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 System data line terminations may affect the cable required. Contact your system manufacturer for exact requirements. Installation should be in accordance with National Electric Code ANSI/NFPA 70. Note: The cable should have a minimum of four cores (two for power and two for output data). If the reader’s input control lines are required, then the cable will need to have extra one or two cores depending on the inputs required. 3.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 Wiegand Output Timing ABA Track 2 Magnetic Stripe Output Timing Regulatory FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FlexSmart™ 609X Series Installation Guide – 6090A-901, A.0 Models 6090 HID Format MIFARE Euro Reader 6091 Custom MIFARE Euro Reader 6092 Custom DESFire Euro Reader Contact Americas HID Corporation (California, USA) support: tech@hidcorp.com main: (949) 598-1600 support: 1-800-237-7769 fax number: (949) 598-1690 Europe, Middle East and Africa HID Corporation, Ltd. (Haverhill, UK) support: eusupport@hidcorp.
