cl y Testing the Future LABORATORIES, INC. I's EXHIBIT E SYSTEM MANUAL \.
Proximity Reader Installation Manual Installation Requirements The following instructions will explain the installation procedure for the Proximity Reader. The instructions include these sections: Mounting instructions (hazardous & nonhazardous) Connecting the Reader to the Host Testing & Operation of the Proximity Reader Mounting Instructions 1. Determine an appropriate mounting position for the Reader. 2. Drill two 7/64th (109) Inch holes for mounting the Reader to the surface.
Connect the Reader to the Host according to this wiring diagram and the Host installation guide. The legend for wiring is color coded according to the "Gandhian Standard” for the recommended cable.
Figure 3 Installation Procedure: (hazardous unit) 1. Determine an appropriate location for the junction box. Attach the junction box to the mounting surface using the 4 holes shown in figure 3, Mount the junction box cover to the junction box and mount the Reader to the cover with the provided screws. 2. Route conduit and cable to the Junction box per National Electric Code Article 720-2. Provide enough cable length to allow wiring of the Reader assembly outside of the junction box.
Thin Line Il Reader Installation Manual . . Parts List (Included) Quantity; Installation Requirements mem 4 Y 1) Thin Line I 1 The following instructions will explain the installation procedure | 2) #6-32 x 1” serif tapping, Type Tor 23 2 for the Thin Line Il Reader. The instructions include these sec| 3) Installation Chest 1 sons: Mourning Instructions Parts Recommended (not Included) 1) Wire Spica 9 Connecting the Reader to the Host 2) Grommet Power Supply 4.
Connect the Reader to the Host according to this wiring diagram and the Host installation guide. The legend for wiring is color coded according to the “Gandhian Standard” for the recommended cable.