Qstar series high precision mobile GIS product specification instruction
Handbook revision situation Revision date 2012.8 Revision times 1 introduction Qstar series high precision mobile GIS product introduction V1.
Preface Use of the introduction Welcome to use Qstar series high precision mobile GIS product introduction, this manual applies to Q star series, this manual introduced how to set and use Qstar series high precision mobile GIS product.
Technology and service Hi-Target have set up the “technology and service” section in website , if you have problems you can settle them through the "service guide" telephone, contacting regional technology center and headquarters division or through the "experts on the judgment seat," "technology BBS" message, we will answer your questions as soon as possible.
CHAPTER Chapter 1 Products overview This chapter introduces: ■ Product introduction ■ Product features ■Matters needing attention in use 1
Product introduction Qstar series high precision mobile GIS products are equipped with complete navigation and position function and GIS data acquisition function, with the operating mode of physical buttons and touch screen, inputting in both Chinese and English are supported. It is designed as industrial standard, and can be dropped from 1.5 meters high to the cement floor without anything, equipped with IP67 level dustproof and waterproof, it can adapt to complex work environment in the field.
The manufacturers of non Hi-target accessories for the product are responsible for developing, implementing and communicating safety concepts for their products, and are also responsible for the effectiveness of those safety concepts in combination with the Hi-target product. The person responsible for the product must ensure that it is used in accordance with the instructions.
CHAPTER Chapter 2 2 The introduction of Qstar series high precision mobile GIS products The introduction of this chapter: ■ the front of Qstar series high precision mobile GIS products ■ the back of Qstar series high precision mobile GIS products ■ interface ■ touching pen ■ battery ■ data cable ■ belt This chapter introduces Qstar series high precision mobile GIS products appearance, interface, battery, touch pen and data cable, etc.
◊ Touch screen:3.7 inch vertical screen can do click operation directly, support inputting in both Chinese and English. ◊ Protective set: in case that it grind 、fell and shock, effective to avoid instrument scratching. ◊ Keyboard: direction control, the confirmation button, exit button, switch machine etc. ◊The microphone: built-in microphone can be used for the acquisition of voice messages.
Note: when the horn is in water, it may appear silent or husky, dry it and it will be back to normal. The loudspeaker and the instrument is completely waterproof, horn with water will not affect instrument performance, but please timely dry it.. Interface Qstar series high precision mobile GIS products interface position is identified, its main function is charging and data transmission, installing SIM card and SD card, etc. Picture2-3 ◇ Charging interface: connect the charger for lithium battery charge.
Touching pen Qstar series high precision mobile GIS products touching pen is equipped with standard configuration, located in Qstar series high precision mobile GIS products belt . Picture2-4 Battery This illustration shows the standard 8800 mAh lithium battery appearance figure. Picture2-5 Notice: In order to protect the environment, when the lithium battery failure, do not throw them away, please return to Hi-Target or professional battery recycling units processing.
Data cable Picture2-6 ◇Qstar series high precision mobile GIS products interface: used in connection of USB with Qstar series high precision mobile GIS products. ◇USB interface: to connect computer USB port , used for data download. Warning: when the cable is not in use, it should be packed in where the place is not easy to squeeze to prevent damage to the plug.
CHAPTER 3 Chapter 3 Basic operation The introduction of this section: ▇ Keyboard ▇ Touching pen ▇ MicroSD card ▇ Power supply system ▇ Switch machine operation ▇ Data obtain ▇ Application functions Most of the Hi-Target Qstar series high precision mobile GIS products setting and operation can be completed by touching pen, the common operation can be completed by the keyboard . Now we will introduce the appearance and function of the keyboard simply.
“ESC”exit button: short press it on boot-up state, means to cancel or exit the current window operation. “ENT”Confirm button: ok button. Switch machine button/backlight control button: long press it for more than 3 seconds to turns on/off it. On boot-up state, hold the button for 1 second, switch on or off the backlight . Navigation button: move the cursor, to choice the options content.
Table 3-1 Qstar series high precision mobile GIS product battery, charger model name 8800 mAh lithium batteries Lithium battery charger model BL-8800A CL-00A ◊charge When charging, the charger should be specialized charger with standard configuration or seat charger in certain temperature range, and charging time should achieve a certain requirements.
Figure 3-9 ◊ shutdown On state, long press down". 3 seconds, it will tip you to confirm shutdown, click on the "shut Figure3-10 Network connection Click "start" - > "DialConnect", if you have set up dial-up parameters, click "dial-up connection",you can direct dialing. If you did not click "new connection", then click "dial-up connection". For successful dial-up network, you can click "disconnect" to close the connection.
Data obtain 1 Install Microsoft ActiveSync In the incidental disk (tool software \ connection program \ ActiveSync), double click MSASYNC45. exe file, please follow the instructions to complete installation. After the installation, find Microsoft ActiveSync and operate it in the "start menu" "program" .Set up "allows the USB connection" In the menu "connection Settings", as shown in figure 4-21.
Chapter 4 Technology CHAPTER 4 parameters The introduction of this section Technology parameters Technology parameters This chapter will introduces you related parameters of Qstar series high precision mobile GIS product, the product function will vary according to the different models. When you refer to this chapter, please refer to corresponding technical parameters according to the equipment you purchase. \ Model System configuration Operating system: Windows Mobile 6.
Bluetooth Interface: Mini USB interface Storage: Micro SD card slot, 32 G at most Power performance √ √ √ √ √ √ √ √ √ Standard configuration 3.7 V, 3100 mAh lithium batteries Can work continuously over 12 hours support online charge Physical properties Key: 10 buttons, with four the direction key and shortcut key in the side Size:14cm×8cm×3.5cm Weight:360g(contain battery) Work temperature: -30℃ ~ +70℃ storage temperature:- 40℃~+80℃ Dustproof waterproof:IP67 Shockproof: Resistance to 1.