Qcool Intelligent Handled GPS Hi-Target Qcool Quick Start Manual 1
Qcool Intelligent Handled GPS Manual use Welcome to use Qcool series intelligent handheld GPS. This manual applies to Qcool, this manual introduces how to install, set up and use intelligent handheld GPS. Manual introduction This manual introduce that how to setup and use this Qcool series intelligent handheld GPS. Experience demanded In order to you can better use Qcool series intelligent handheld GPS. HI-TARGET suggest you have a certain measure knowledge, and carefully read the instruction.
Qcool Intelligent Handled GPS may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
Qcool Intelligent Handled GPS Technology and service HI-TARGET have set up the “technology and service” section, if you have problems you settle them through the "service guide" telephone contact regional technology center, headquarters division or through the "experts on the judgment seat," "technology BBS" message, we will answer your questions in time.
Qcool Intelligent Handled GPS Device Device Overview Battery Information Software Select / customize coordinate system / datum Dictionary New build a project Import background image Record Point / Line / Area Export data 5
Qcool Intelligent Handled GPS Device Device Overview When using your device for the first time, you should complete these tasks to set up the device and get to know the basic features. ① 3 ○ 2 ○ 4 ○ 5 ○ ① ○ 2 ○ 3 ○ 4 ○ 5 Up key Down key Storage Card and USB Port OK key Power and Backlight key Battery information You can use alkaline, MiMH, or lithium batteries. Use NiMH or lithium batteries for the best result. The device operates on two AA batteries.
Qcool Intelligent Handled GPS NOTICE Alkaline batteries lose a 6 ○ significant amount of their capacity as temperature decreases. Therefore, use lithium batteries when operating the device in below-freezing conditions 7 ○ ○ 6 Rear cover screw ○ 7 Battery Software Start Qcool software, main contact interface presents. Before going out for field operation, please follow below procedure step by step.
Qcool Intelligent Handled GPS Ø New build a project Ø Import background image Ø Collect Point / Line / Area Ø Data download 8
Qcool Intelligent Handled GPS 1. Select / Edict coordinate system Before field operation, your own coordinate system is needed, by clicking to select / edict coordinate system. You can edit Ellipsoid, Projection, and Central Meridian. When finished, click 9 to confirm.
Qcool Intelligent Handled GPS 2. Open / New build a dictionary Dictionary is used to record attribute. By clicking you can new build dictionary or customize the attribute according to your field operation needs. All the features are described by point, line or area. For example, trees should be recorded as point, roads should be recorded as line, and buildings should be recorded as area. 3. New build a project When coordinate and dictionary are both ready, you can start you project now.
Qcool Intelligent Handled GPS 4. Import background image Map or background image can be imported into program to get more artistic interface. Click Click to enter map interface. to add your map. There are two type of format for map, *.zmp file can be created by Hi-Target Hi-Net Server software. Every signal point on *.zmp map has a coordinate, with this map, Qcool will show where you are and what the area is.
Qcool Intelligent Handled GPS 5. Collect Point / Line / Area Main function of Qcool is to record the objects with coordinates and attributes. Notice: when recording, first record coordinate, then attribute. Collect Point Click to enter “Collect Point” interface. Here you can see your current position with coordinate. First click to record coordinate, then click to record attribute.
Qcool Intelligent Handled GPS When recording coordinate, you can manually click recording by distance or time. For attributes, you can click or automatically for every single point or after recording several coordinates then click to write the same attribute to those points. After writing attributes, click to confirm. Collect Line Click to enter “Collect Line” interface. Here shows your current position with coordinate.
Qcool Intelligent Handled GPS Collect Area Click to enter “Collect Area” interface. Here shows your current position with coordinate. At least three points will make area, which means you should first record at least three points with coordinate, then click to write attribute. Tips: Save your data by clicking . 6. Data download In order to connect to your PC, Microsoft ActiveSync is need on Windows XP; Windows Mobile Device Center is need on Windows 7 operating system.