iHand55 Handheld Controller User Manual
iHand55 Handheld Controller User Manual Manual Revision Revision Date Revision Level Description November, 2021 1 iHand55 Handheld Controller User Guide A1
iHand55 Handheld Controller User Manual iHand55 Handheld Controller User Manual
iHand55 Handheld Controller User Manual Preface Introduction Welcome to the Hi-Target iHand55 handheld controller. This introduction describes how to use this product. Experience Requirement In order to help you use Hi-Target series products better, Hi-Target suggests you carefully read the instructions. If you are unfamiliar with the products, please refer to http://www.hi-target.com.cn/. Tips for Safe Uses Notice: The contents here are special operations and need your special attention.
iHand55 Handheld Controller User Manual Technology and Service If you have any technical issues, please call Hi-Target technology department for help, we will answer your question. Relevant Information You can obtain this introduction by: 1. After purchasing Hi-Target products, you will find this manual in the instrument container to guide you on operating the instrument. 2. Log onto the Hi-Target official website, download the electronic version introduction at Partners → Partner Center.
iHand55 Handheld Controller User Manual \ Chapter 1 iHand55 Handheld Controller This chapter contains: - Introduction - Appearance - Controller accessories - Operation - Application 3
iHand55 Handheld Controller User Manual 1.1 Introduction 1.1.1 Foreword The iHand55 controller is a professional data collector, based on the Android system. Using a combination of physical buttons and touch screen to operate, the default input languages are Chinese and English, and it supports multiple languages. The industrial-standard design can withstand 1.2 meters drop to a cement floor, is IP67 waterproof and dustproof standard to adapt to a complex operating environment.
iHand55 Handheld Controller User Manual Notice: The iHand55 hand-held controller must be used within the temperature range from -20℃ to 60℃ 1.2 Appearance 1.2.1 Front of the controller The front of the iHand55 controller includes a touch screen, keyboard microphone and indictor light.
iHand55 Handheld Controller User Manual 1.2.2 Reverse side of the controller There is a camera, belt, NFC, trumpet, etc. on the reverse of the controller. 1 2 3 4 Figure 1‐2‐2 the backside of the iHand55 1- Camera 2- NFC 3-Trumpet 4- Belt hole - Camera: used for field collection of images. - Belt hole: connect the belt to prevent it sliding down. - Trumpet: conduct real-time voice broadcasts for instrument operation and status.
iHand55 Handheld Controller User Manual 1.2.3 Side of the controller 2 1 Figure 1‐2‐3 the port of iHand55 1- Waterproof & dustproof rubber cover 2- Type-C port - Type-C port: for connecting the USB data line and the controller. Notice: When not using Mini USB, please close the rubber cover to make it waterproof and dustproof. 1.3 Controller accessories 1.3.
iHand55 Handheld Controller User Manual 1.3.2 Touch pen Figure 1‐3‐2 Touch pen Touch pen: located on the strap of the controller. 1.4 Operation 1.4.1 Keyboard Most settings and operations of the iHand55 hand-held controller can be completed by the touch pen, and commonly used operations can be completed on the keyboard. Appearance and functions of the keyboard are as follows. iHand55 keyboard includes: Back, OK, Power, APP, Fn, Collect, etc.
iHand55 Handheld Controller User Manual 1- APP 2- Fn 3- Power 4- Back 6- OK 7- Delete 8- Space 9- Shift 5- Collect - Back: cancel or exit the operation of the current window. - OK: confirmation. - Power: press it for over 3secs to power on/off. Press it for 1sec to turn off /on the screen backlight in the power on status. - APP: quick start of the APP. The default is Hi-Survey Road software. - Fn: when inputting, short press this key to cycle the input method (English association en/ number 123).
iHand55 Handheld Controller User Manual Notice: If the battery needs to be stored for a long time, it should be charged to about 70% and then placed in a dry, low temperature environment. It is recommended that you charge and discharge the battery every 3 months. If you do not have the conditions needed for charging and discharging, take out the battery after 3 months and charge it to about 70% before storing it once more. 2. Charger: To charge the controller, use the standard charger.
iHand55 Handheld Controller User Manual The special charger should be within a certain temperature range when charging, and a certain charge time is required. Specific use methods and requirements: use the special charger of the controller to charge in the temperature range of 10℃-40℃. There is a certain amount of electricity in the battery on first use, let the power completely run out from the first charge, then the first three times you will need to charge for 3 hours.
iHand55 Handheld Controller User Manual Figure 1‐4‐4 Data usage Figure 1‐4‐5 Overview of data Figure 1‐4‐6 Cellular data network 1.4.5 Installation of the Micro SD card The Micro SD card can save collected data and program files. Notice: Micro SD card（TF card）is an external storage card, usually used in mobile phones and PDAs. If you buy this, please note the difference to ordinary SD cards.
iHand55 Handheld Controller User Manual Micro SD card slot Figure 1‐4‐7 Micro SD slot Figure 1‐4‐8 Installation of Micro SD card 1.4.6 Power on/off In the off state, long press the power button for 3 seconds, it will power on. Figure 1‐4‐9 The interface of the iHand55 screen In the power on state, long press the power button for 3 seconds, it will prompt to shut down and to confirm, click Power off.
iHand55 Handheld Controller User Manual Figure 1‐4‐10 Power off 1.5 Application 1.5.1 Connecting the controller to computer 1. Connect the controller to computer via the USB data cable. 2. Transfer files: pull down the notice column and click USB for charging.
iHand55 Handheld Controller User Manual Figure 1‐5‐2 Charging Figure 1‐5‐3 File transfers 3. Connect the PC version mobile phone assistant: open the hand-held controller, click Setting → System → Developer options → USB debugging.
iHand55 Handheld Controller User Manual Figure 1‐5‐6 USB debugging 1.5.2 Upgrade method iHand55 controller supports two methods for upgrading, local upgrade and wireless upgrade. 1. Local upgrade of iHand55 controller (download the firmware from the Hi-Target official website first). Step1: copy the upgrade firmware to the SD directory. Figure 1‐5‐7 Upgrade patch Step2: choose the System Update App.
iHand55 Handheld Controller User Manual Figure 1‐5‐8 Update App Step3: open the System Update App, as shown below. Figure 1‐5‐9 Interface of the update Step4: click the top right menu selection in the interface, and choose Local updates. Figure 1‐5‐10 Local updates Step5: enter the interface.
iHand55 Handheld Controller User Manual Figure 1‐5‐11 Local updates Step6: select the Internal storage file, then select the update firmware. Figure 1‐5‐12 Choose the firmware Step7: after selecting the upgrade firmware, click Install Now.
iHand55 Handheld Controller User Manual Figure 1‐5‐13 Install Step8: the system will restart and begin to update. Figure 1‐5‐14 Interface of upgrade 2. Wireless update Step1: select the System Update App.
iHand55 Handheld Controller User Manual 6 Figure 1‐5‐15 Update App Step2: after entering the System update App, if there is a new version, the interface will show it and display the update. The complete update content will appear if you draw up the screen. Step3: click Download, the firmware update patch will be downloaded. Step4: when the system upgrade package is downloaded, come out of the prompt window, and click Confirm. Special attention should be paid here.
iHand55 Handheld Controller User Manual 21
