User's Manual

1/4



CH11HandControlInstructions

1.ProductOverview

ProductName：HandControl

ProductModelNo.：CH11

FCCID:2AEQWCH11HHC001



2.Environmentrequirement

Operationtemperature:+10℃~+40℃.

Storagetemperature: －10℃~65℃.

OperatingHumidity：10%~80%RH，non‐condensing.

StorageHumidity：10%~85%RH，non‐condensing.



3.DirectionsforOperation

Inordertooperate,placethree

1.5VAAAbatteriesintheremotecontrolanduseinconjunction

withtheCB11controlbox.Inaddition,thePSK2920Apowersupplyswitchmustbeconnectedas

thepowersupplyforthecontrolbox.Detailedoperationdirectionsbelow:

Matchcodeandpositionsetting：



PAGE 1
CH11 Hand Control Instructions 1. Product Overview Product Name： Hand Control Product Model No.： CH11 FCC ID: 2AEQWCH11HHC001 2. Environment requirement Operation temperature: +10℃~ +40℃. Storage temperature: －10℃~65℃. Operating Humidity：10%~80%RH，non‐condensing. Storage Humidity：10%~ 85%RH，non‐condensing. 3. Directions for Operation In order to operate, place three 1.5V AAA batteries in the remote control and use in conjunction with the CB11 control box.
PAGE 2
4.
PAGE 3
5. Matters needing attention： 5.1 Do not mix old and new batteries or different types of batteries in remote. 5.2 When the battery power is weak, electrolyte leakage may occur, and will damage the remote. Once the power is low, replace the battery as soon as possible. 5.3 If the remote will not be used for a long period of time, remove the batteries to avoid electrolyte leakage. 5.4 The battery should not be exposed to direct sunlight, fire, or other excessive heat.